diff options
| -rw-r--r-- | src/gprs/sgsn_vty.c | 53 |
1 files changed, 38 insertions, 15 deletions
diff --git a/src/gprs/sgsn_vty.c b/src/gprs/sgsn_vty.c index c2c03b5a9..9d1d86d39 100644 --- a/src/gprs/sgsn_vty.c +++ b/src/gprs/sgsn_vty.c @@ -301,7 +301,12 @@ DEFUN(cfg_sgsn, cfg_sgsn_cmd, DEFUN(cfg_sgsn_bind_addr, cfg_sgsn_bind_addr_cmd, "gtp local-ip A.B.C.D", "GTP Parameters\n" - "Set the IP address for the local GTP bind\n" + "Set the IP address for the local GTP bind for the Gp interface (towards the GGSNs)." + " Note: in case you would like to run the GGSN on the same machine as the SGSN, you can not run" + " both on the same IP address, since both sides are specified to use the same GTP port numbers" + " (" OSMO_STRINGIFY_VAL(GTP1C_PORT) " and " OSMO_STRINGIFY_VAL(GTP1U_PORT) ")." + " For example, you could use 127.0.0.1 for the SGSN and 127.0.0.2 for the GGSN in such" + " situations.\n" "IPv4 Address\n") { inet_aton(argv[0], &g_cfg->gtp_listenaddr.sin_addr); @@ -311,7 +316,9 @@ DEFUN(cfg_sgsn_bind_addr, cfg_sgsn_bind_addr_cmd, DEFUN(cfg_ggsn_remote_ip, cfg_ggsn_remote_ip_cmd, "ggsn <0-255> remote-ip A.B.C.D", - GGSN_STR "GGSN Number\n" IP_STR "IPv4 Address\n") + GGSN_STR "GGSN Number\n" + "Configure this static GGSN to use the specified remote IP address.\n" + "IPv4 Address\n") { uint32_t id = atoi(argv[0]); struct sgsn_ggsn_ctx *ggc = sgsn_ggsn_ctx_find_alloc(id); @@ -351,7 +358,9 @@ DEFUN(cfg_ggsn_gtp_version, cfg_ggsn_gtp_version_cmd, DEFUN(cfg_ggsn_dynamic_lookup, cfg_ggsn_dynamic_lookup_cmd, "ggsn dynamic", - GGSN_STR "Enable dynamic GRX based look-up (requires restart)\n") + GGSN_STR + "Enable dynamic resolving of GGSNs based on DNS resolving the APN name like in a GRX-style setup." + " Changing this setting requires a restart.\n") { sgsn->cfg.dynamic_lookup = 1; return CMD_SUCCESS; @@ -359,7 +368,8 @@ DEFUN(cfg_ggsn_dynamic_lookup, cfg_ggsn_dynamic_lookup_cmd, DEFUN(cfg_grx_ggsn, cfg_grx_ggsn_cmd, "grx-dns-add A.B.C.D", - "Add DNS server\nIPv4 address\n") + "Use the specified IP address for DNS-resolving the AP names to GGSN IP addresses\n" + "IPv4 address\n") { struct ares_addr_node *node = talloc_zero(tall_bsc_ctx, struct ares_addr_node); node->family = AF_INET; @@ -401,7 +411,7 @@ static int add_apn_ggsn_mapping(struct vty *vty, const char *apn_str, DEFUN(cfg_apn_ggsn, cfg_apn_ggsn_cmd, "apn APNAME ggsn <0-255>", APN_STR APN_GW_STR - "Select the GGSN to use when the APN gateway prefix matches\n" + "Select the GGSN to use for the given APN gateway prefix\n" "The GGSN id") { @@ -411,7 +421,8 @@ DEFUN(cfg_apn_ggsn, cfg_apn_ggsn_cmd, DEFUN(cfg_apn_imsi_ggsn, cfg_apn_imsi_ggsn_cmd, "apn APNAME imsi-prefix IMSIPRE ggsn <0-255>", APN_STR APN_GW_STR - "Restrict rule to a certain IMSI prefix\n" + "Select the GGSN to use for the given APN gateway prefix if and only if the IMSI matches the" + " given prefix.\n" "An IMSI prefix\n" "Select the GGSN to use when APN gateway and IMSI prefix match\n" "The GGSN id") @@ -634,7 +645,8 @@ DEFUN(cfg_encrypt, cfg_encrypt_cmd, DEFUN(cfg_auth_policy, cfg_auth_policy_cmd, "auth-policy (accept-all|closed|acl-only|remote)", - "Autorization Policy of SGSN\n" + "Configure the Authorization policy of the SGSN. This setting determines which subscribers are" + " permitted to register to the network.\n" "Accept all IMSIs (DANGEROUS)\n" "Accept only home network subscribers or those in the ACL\n" "Accept only subscribers in the ACL\n" @@ -986,7 +998,8 @@ DEFUN(update_subscr_update_auth_info, update_subscr_update_auth_info_cmd, DEFUN(cfg_gsup_remote_ip, cfg_gsup_remote_ip_cmd, "gsup remote-ip A.B.C.D", "GSUP Parameters\n" - "Set the IP address of the remote GSUP server\n" + "Set the IP address of the remote GSUP server (e.g. OsmoHLR)." + " This setting only applies if 'auth-policy remote' is used.\n" "IPv4 Address\n") { inet_aton(argv[0], &g_cfg->gsup_server_addr.sin_addr); @@ -997,7 +1010,7 @@ DEFUN(cfg_gsup_remote_ip, cfg_gsup_remote_ip_cmd, DEFUN(cfg_gsup_remote_port, cfg_gsup_remote_port_cmd, "gsup remote-port <0-65535>", "GSUP Parameters\n" - "Set the TCP port of the remote GSUP server\n" + "Set the TCP port of the remote GSUP server, see also 'gsup remote-ip'\n" "Remote TCP port\n") { g_cfg->gsup_server_port = atoi(argv[0]); @@ -1008,7 +1021,9 @@ DEFUN(cfg_gsup_remote_port, cfg_gsup_remote_port_cmd, DEFUN(cfg_gsup_oap_id, cfg_gsup_oap_id_cmd, "gsup oap-id <0-65535>", "GSUP Parameters\n" - "Set the SGSN's OAP client ID\nOAP client ID (0 == disabled)\n") + "Set the OAP client ID for authentication on the GSUP protocol." + " This setting only applies if 'auth-policy remote' is used.\n" + "OAP client ID (0 == disabled)\n") { /* VTY ensures range */ g_cfg->oap.client_id = (uint16_t)atoi(argv[0]); @@ -1018,7 +1033,9 @@ DEFUN(cfg_gsup_oap_id, cfg_gsup_oap_id_cmd, DEFUN(cfg_gsup_oap_k, cfg_gsup_oap_k_cmd, "gsup oap-k K", "GSUP Parameters\n" - "Set the OAP shared secret K\nK value (16 byte) hex\n") + "Set the OAP shared secret key K for authentication on the GSUP protocol." + " This setting only applies if auth-policy remote is used.\n" + "K value (16 byte) hex\n") { const char *k = argv[0]; @@ -1051,7 +1068,9 @@ disable: DEFUN(cfg_gsup_oap_opc, cfg_gsup_oap_opc_cmd, "gsup oap-opc OPC", "GSUP Parameters\n" - "Set the OAP shared secret OPC\nOPC value (16 byte) hex\n") + "Set the OAP shared secret OPC for authentication on the GSUP protocol." + " This setting only applies if auth-policy remote is used.\n" + "OPC value (16 byte) hex\n") { const char *opc = argv[0]; @@ -1083,7 +1102,7 @@ disable: DEFUN(cfg_apn_name, cfg_apn_name_cmd, "access-point-name NAME", - "Configure a global list of allowed APNs\n" + "Globally allow the given APN name for all subscribers.\n" "Add this NAME to the list\n") { return add_apn_ggsn_mapping(vty, argv[0], "", 0); @@ -1104,7 +1123,9 @@ DEFUN(cfg_no_apn_name, cfg_no_apn_name_cmd, DEFUN(cfg_cdr_filename, cfg_cdr_filename_cmd, "cdr filename NAME", - "CDR\nEnable saving CDR to filename\nname\n") + "CDR\n" + "Set the file name for the call-data-record file, logging the data usage of each subscriber.\n" + "filename\n") { talloc_free(g_cfg->cdr.filename); g_cfg->cdr.filename = talloc_strdup(tall_vty_ctx, argv[0]); @@ -1138,7 +1159,9 @@ DEFUN(cfg_no_cdr_trap, cfg_no_cdr_trap_cmd, DEFUN(cfg_cdr_interval, cfg_cdr_interval_cmd, "cdr interval <1-2147483647>", - "CDR\nPDP periodic log interval\nSeconds\n") + "CDR\n" + "Set the interval for the call-data-record file\n" + "interval in seconds\n") { g_cfg->cdr.interval = atoi(argv[0]); return CMD_SUCCESS; |