| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make use of variables, log them to LOGL_DEBUG, and reduce code
duplication.
This should help to narrow down the cause why snd_dl_ass are not
answered by the MS sometimes.
Sponsored-by: On-Waves ehf
|
|
Currently the values in the BSSGP RA Cap IE are eventually use
overwrite the 'good' values obtained from the MS earlier.
Use the 'good' values when the are present, which is assumed if
at least one of ms->ms_class() or ms->egprs_ms_class() is set.
Sponsored-by: On-Waves ehf
|
|
Currently the window size is fixed to 64 even for EGPRS.
Support dynamic window sizes depending on the number of PDCH. The
WS can be set to b + f * N_PDCH. If the result is not valid according
to TS 44.060, Table 9.1.9.2.1, the value will be corrected to use the
next lower valid value (or 64).
The following VTY commands are added (config-pcu node):
window-size <0-1024> set base (b) value and leave f unchanged
window-size <0-1024> <0-256> set base (b) and factor (f)
Sponsored-by: On-Waves ehf
|
|
Currently the plain 'egprs' command enables EGPRS but doesn't prevent
phones from being served in GPRS mode if they do not support EGPRS.
This involves complex frame allocation implementations in dynamic
mode, especially if 8PSK is being used. This is due to the inability
of non-EGPRS phone to decode 8PSK USF and ES/P altogether. Since
polling has a higher priority than USF, collisions will have to be
prevented by the PCU by never using an GPRS USF if it refers to a FN
that is already being used for polling.
This commit just disables mixed usage by ignoring GPRS-only request
if EGPRS is enabled.
The following VTY command (config-pcu node) is changed:
egprs -> egprs only
Sponsored-by: On-Waves ehf
|
|
The bitvec RBB is always valid, even when FINAL_ACK_INDICATION is
set. This is done by the ack/nack decoder function which fake a
bitmap starting with V(A) up to V(S)-1 in that case (see
Decoding::handle_final_ack).
Call gprs_rlcmac_dl_tbf::update_window unconditionally and only use
is_final for logging and TBF state changes in
gprs_rlcmac_dl_tbf::rcvd_dl_ack.
Sponsored-by: On-Waves ehf
|
|
Currently the old fixed 64 bit RBB based implementation is used for
GPRS.
Use the new bitvec based methods instead.
Sponsored-by: On-Waves ehf
|
|
Currently TBF related tasks (status changes, counter updates,
LLC dummy command insertion) as well as
RLC data block generation are done within create_new_bsn.
The data block creation part has already been copied to
the stateless Encoding::rlc_data_to_dl_append function.
This commit changes create_new_bsn to use the encoder function and
just care about the TBF related stuff.
Since the rlc_data_to_dl_append function has been validated against
the test cases being described in annex B of TS 44.060, this
commit fixes an encoder bug which leads to broken LLC frames in
a special case (see example B.2, the main header's E bit was
erroneously set to 1 in that case). When this happens, the LLC frame
will get discarded after reassembly, so that TCP will have to
retransmit the lost packet.
Sponsored-by: On-Waves ehf
|
|
This commit removes the use of struct rlc_dl_header from
gprs_rlcmac_dl_tbf::create_dl_acked_block and
gprs_rlcmac_dl_tbf::create_new_bsn. Instead of patching the
data area directly, the RLC block encoding functions are used.
Note that the data unit encoding is still hard-coded to GPRS in
create_new_bsn, so using MCS 1-4 (albeit being supported by the
encoder) will not work yet.
Sponsored-by: On-Waves ehf
|
|
Some test function don't have the "=== start/end ===" printfs.
Sponsored-by: On-Waves ehf
|
|
Currently GPRS is always used for downlink, which violates TS 44.060
(concurrent TBF must have the same mode).
Enable EGPRS mode for downlink if the EGPRS MS class is != 0 and
EGRPS has been enabled.
Note that EGPRS Ack/Nack handling is not yet implemented, so enabling
EGPRS will not work still. But we will now get EGPRS DL ACK/NACK
messages now from the MS.
Sponsored-by: On-Waves ehf
|
|
Currently the TBF and MS object use a plain integer value
(current_cs) to manage the coding scheme. This makes it difficult to
support the MCS schemes. GprsCodingScheme supports a partial ordering
of these values (CS and MCS) and provides safe increment and
decrement methods.
Use the GprsCodingScheme type instead of integer for cs fields and
variables. Add a 'mode' to GprsMs which can be set to either GPRS,
EGPRS, or EGPRS_GMSK which also set the initial values of
current_cs_ul/dl. Select the mode based on max_mcs_ul and max_mcs_dl.
Sponsored-by: On-Waves ehf
|
|
Log incoming RLC data messages and RLC data units to LOGL_DEBUG.
Sponsored-by: On-Waves ehf
|
|
Currently GPRS is handled by the old code path while EGPRS already
uses the unified functions. The rcv_block_egprs is basically not
specific to EGPRS and just needs minor modifications to handle GPRS.
This commit turns gprs_rlcmac_pdch::rcv_block_egprs into a unified
rcv_data_block method and uses it for GPRS, too.
Note that the logging messages of the new parser are different.
Sponsored-by: On-Waves ehf
|
|
Currently gprs_rlcmac_tbf::extract_tlli takes care of decoding and
the TBF update. These are really different things and doing the
decoding in extract_tlli makes EGPRS support more complex.
This commit moves the TBF state related part into a new method
gprs_rlcmac_tbf::set_tlli_from_ul.
Sponsored-by: On-Waves ehf
|
|
Currently the block size is mapped by a switch statement to strip
extra bits that are not used for RLC blocks. That information is
already available via the GprsCodingScheme class.
This commit moves the CS/MCS detection to the rcv_block message and
passes the cs object via rcv_block_gprs, where the length gets
adjusted, to gprs_rlcmac_pdch::rcv_data_block_acknowledged. There the
switch statement is removed.
Note that the TbfTest.err changes due to an additional log message.
Sponsored-by: On-Waves ehf
|
|
The multislot (MS) class and the EGPRS MS class can also be passed
via BSSGP in an MS Radio Access Capability element which can
optionally be contained in a DL-UNITDATA PDU. While this case is fully
supported for GPRS, the EGPRS MS class in BSSGP messages is ignored.
This commit extends gprs_rlcmac_dl_tbf::handle to pass the EGPRS MS
class, too.
Note, that the EGPRS class is not yet taken from the CSN.1 RA
capability and is always set to 0. Note also, that append_data
still uses ms_class only.
Sponsored-by: On-Waves ehf
|
|
Add an egprs_ms_class argument to the allocation functions and
set/pass it where necessary.
Sponsored-by: On-Waves ehf
|
|
The leak rate sent to the SGSN does not reflect the current CS level,
lost frames, and control message overhead. So the SGSN cannot do
proper queue control under non-optimal conditions.
This commit computes the leak rate for the last flow control interval
by computing the maximum theoretical leak rate and basically
substracting control blocks, nacked blocks, and reduced block sizes
due to CS downgrade. By using this approach, the value will by more
stable on low load, where the value will tend to be near the value
derived from the configuration. On full load the transmitted value is
completely derived from the measurements.
Note that the MS default values are no adapted to the adapted BVC
leak rate, since a single MS which has a lower link quality would
otherwise be reducing the rate of another MS with good radio
conditions, which would not make much sense if they did not share any
PDCH.
Sponsored-by: On-Waves ehf
|
|
Currently an existing DL TBF can get lost in the process of
establishing an UL TBF via RACH. This can lead to stalled connections
until the network sends more LLC frames.
This commit adds a check for a non-empty LLC queue after the UL TBF
has been established to rcv_control_ack (GPRS_RLCMAC_UL_ASS_WAIT_ACK
path) to eventually establish a new DL TBF on the UL TBF's PACCH.
Sponsored-by: On-Waves ehf
|
|
Currently an existing DL TBF is freed immediately, when a resource
request is received. This makes sense since the MS might have dropped
it when switching to the PDCH signaled via the AGCH for the SBA. But
if the TBF still is assumed to exist on the MS side, there might be
TFI collisions if the old TBF object is not kept to block its TFI
for some time.
This commit changes rcv_resource_request to call release() instead of
tbf_free() on the DL TBF object (if it exists).
Sponsored-by: On-Waves ehf
|
|
Currently reuse_tbf (partly) resets the old DL TBF and uses its PACCH
to establish a new DL TBF. The method can not be used with UL TBFs.
This commit replaces the reuse_tbf method into a
gprs_rlcmac_dl_tbf:release method which triggers the TBF's timer
based deletion (so that the TFI is still reserved for some time) and
a gprs_rlcmac_tbf::establish_dl_tbf_on_pacch which can establish DL
TBFs on existing PACCHs of either DL or UL TBFs.
Sponsored-by: On-Waves ehf
|
|
Currently when a second MS object has been created for an MS, because
the TLLI was not known yet, the will be detected in
gprs_rlcmac_tbf::extract_tlli and the two objects will be merged by
update_ms. But when the dl_tbf is moved from the old to the new
(second) MS object, the old MS object can get idle and be removed
before the object are merged. This can cause LLC frame loss when the
MS object is deleted immediately after getting idle (no timeout
configured).
This commit adds a guard to keep the MS object until extract_tlli has
been executed.
Sponsored-by: On-Waves ehf
|
|
This reverts commit e91bd3babd5c04a154f296607b401a5050dcba31.
That commit seems to cause hanging DL TBFs when there was a RACH
based UL TBF establishment while it that TBF is active. This could be
caused by the use of a different PDCH for the SBA.
Conflicts:
tests/tbf/TbfTest.cpp
tests/tbf/TbfTest.err
|
|
Currently all of these messages are discarded if they are assumend to
be caused by noise. But even in these cases, the FN and TN values
which are added by the DSP are valid. So these can be used to update
the current_frame value.
The osmo-bts sets the fBFILevel of a physical channel to -200dB if it
is used for PDTCH or PACCH which is the case for all PDCH. This way
a data_ind or ra_ind message is already send at least once per block
period (4 frames) per PDCH. These messages are passed to either
handle_ph_data_ind or handle_ph_ra_ind even if they contain garbage
data.
The ra_ind messages are sometimes sent a few frames earlier than
data_ind messages using the same frame.
This commit adds calls to update the current_frame value based on all
of these messages before they are discarded. The FN taken from ra_ind
are passed with an increased max_delay (5) to compensate for early
ra_ind messages.
Sponsored-by: On-Waves ehf
|
|
The FN of the data_ind taken from the DSP are monotonic, so latency
does not affect the detection of poll timeouts if these FN are used.
If the FN is larger than a poll_fn value, it can safely be assumed
that the poll response will not arrive later on.
Currently a max_delay of 60 frames is used, which has the drawback
that additional ~250ms will pass until a lost ACK is detected.
Using the data_ind's FN alone breaks the poll timeout detection if
there are no other MS sending data blocks.
This commit adds BTS::set_current_block_frame_number that is called
with the FN taken from data_ind messages. The max_delay is set to 0
which removes the additional delay, when this FN is used to detect
poll timeouts. So the average additional delay decreases with the
number of data_ind per time. The current_frame is updated unless it
seems to have been updated already (assumed if 0 < cur_fn - block_fn
< 500). Thus the time_ind has still priority to update the
current_frame value.
Sponsored-by: On-Waves ehf
|
|
This commit adds the relevant frame number to the "poll timeout"
logging message. In addition, logging is added to the places where
poll_fn gets set.
The goal is to track down the source for frequent "poll timeout"
messages.
Sponsored-by: On-Waves ehf
|
|
Currently when calling GprsMs::attach_tbf and a TBF of the same
direction already exists, the old TBF gets detached from the MS
object.
Therefore that TBF object loses access to that MS object including
for instance TLLI and IMSI.
This leads to failing DL TBF reuses, since the downlink assigment
cannot be sent on the PACCH later on because that must be sent on the
old DL TBF which ms() is NULL and the new DL TBF cannot be retrieved.
This commit fixes this bug by changing the GprsMs implementation to
keep a list of replaced (old) TBFs. TBFs are only removed when they
are being detached explicitely (see tbf_free and set_ms).
Addresses:
tbf.cpp:741 We have a schedule for downlink assignment at uplink
TBF(TFI=1 TLLI=0xf35a680e DIR=UL STATE=RELEASING), but there is no
downlink TBF
Sponsored-by: On-Waves ehf
|
|
This tests the usage of an existing TBF that is no longer in FLOW
state to request a new DL TBF via the old TBF's PACCH.
The test triggers a bug that breaks the association between both TBF
objects, resulting in packet loss and transmission stalling.
Sponsored-by: On-Waves ehf
|
|
Currently the assignment is completed by manipulating the state of
the TBF objects directly by setting the state fields to fixed values.
This way, the PCU's code that is responsible to update the state
accordingly is not tested.
This commit changes this to simulate RLC Control Acknowledgement
messages instead.
Sponsored-by: On-Waves ehf
|
|
This function basically request the generation of the next downlink
RLC block. Since this will no really send somthing to the PCU, the
current name can be misleading.
This commit just renames the function.
Sponsored-by: On-Waves ehf
|
|
The block number can always be deduced from the frame number. The
current test code handles the block number explicitely, which makes
the code more complex and has also led to block number errors cause
by not wrapping the numbers (valid block numbers range from 0 to 11).
This commit changes send_rlc_block to always compute the block number
based on the frame number. It also turns the block_nr into an
optionaly output-only parameter.
Sponsored-by: On-Waves ehf
|
|
The current implementation takes a lot of parameters (bts, trx_no,
...) that can also be taken from a TBF object.
This commit adds an alternative variant with just takes a TBF, the fn
(in/out), and the block number (in/out).
Sponsored-by: On-Waves ehf
|
|
This commits adds send_ul_mac_block() to encode and send a
RlcMacUplink_t to the PCU.
Sponsored-by: On-Waves ehf
|
|
Currently the pending LLC packets are lost in some cases when MS
objects are merged, for instance after a RACH when there were 2 MS
object for the same MS (they get merged, when the TLLI is known for
both objects).
This patch modifies GprsMs::merge_old_ms to move all pending LLC
packets (if there are any) to the current MS object.
Sponsored-by: On-Waves ehf
|
|
Currently all active TBF of an MS are killed if a Packet Resource
Request is received from the MS. In general this happens after a RACH
request. This does not happen after a resource request that has been
included into a Downlink Ack/Nack.
Sometimes an UL TBF is requested by an MS via RACH while a DL TBF is
running for instance to send a TCP Ack. This can happen, if a former
request via PACCH did not work.
This commit removes the killing of the DL TBF from
gprs_rlcmac_pdch::rcv_resource_request().
Sponsored-by: On-Waves ehf
|
|
This adds tests for
- RA update with RACH for the RAUpdateComplete message
- RACH for UL while DL is active (LLC queue not empty)
Sponsored-by: On-Waves ehf
|
|
This commit fixes several issues:
- Set MS class in request
- Set IMSI in establish_ul_tbf_two_phase
- Fake assigment acknowledgement in establish_ul_tbf_two_phase
- Fix TFI bit offset to 1 (was 2)
Sponsored-by: On-Waves ehf
|
|
Currently the functions test_tbf_single_phase and test_tbf_two_phase
do the test logging, BTS intialisation, and the complete message
sequencing on their own. Therefore they cannot be used to test more
complex sequences like TBF reestablishment.
This commit moves the code that does the actual messaging into own
functions. The frame number handling is generalised which also fixes
a block number wrapping error on the way.
Sponsored-by: On-Waves ehf
|
|
Currently the merging of the meta information (MS class, IMSI) takes
place in gprs_rlcmac_tbf::merge_and_clear_ms(). This makes it
difficult to merge the internal state and does not directly relate to
TBFs anyway.
This commit moves this into a new method GprsMs::merge_old_ms.
Sponsored-by: On-Waves ehf
|
|
Currently there is not support for Network Service (NS) logging.
This commit adds the missing definitions and sets the default level
to INFO. Further configuration can now be done with the 'logging
level ns' VTY command.
Sponsored-by: On-Waves ehf
|
|
Currently if an MS retries to access the PCU by using RACH and if
there is already an entry for that MS, a duplicated MS object
referring to the same TLLI is created. This is caused by blindly
setting the TLLI without querying the MS storage to avoid
inconsitencies.
This leads to several entries in the MS storage that are assigned to
the same TLLI. If that happens, 'show ms all' can display multiple
entries with the same TLLI (note that an MS object can belong to
several TLLIs, so there might be an intersection that is not visible
in the list) or 'show tbf all' can show entries with MS_CLASS == 0 in
some cases.
This commit changes update_ms() to merge and clean up old entries
that belong to the given TLLI if they exist. Some data (like the MS
class) is copied to the new MS object.
Note that TBF belonging to the old MS object are deleted immediately
if they have not registered a timer.
Sponsored-by: On-Waves ehf
|
|
Currently when receiving a PACKET DL ACK/NACK message with the Final
Ack Indicator bit set, the TBF's state is set to
GPRS_RLCMAC_WAIT_RELEASE but T3193 is only started when the LLC queue is
empty. Otherwise the reuse_tbf() method is called to establish a new
DL TBF. In that case, the timer is not started. This will leave the
current TBF without a timer so it is potentially not released later
on.
This is recognisable by sticky entries in the output of the
'show tbf all' command and possibly allocation failures if there are
too many of them.
This commit changes the code to always start T3193 to make sure, that
a timer is always active when the the state is set to
GPRS_RLCMAC_WAIT_RELEASE.
Note that TS 44.060, 9.3.2.6 requests to release the 'old' TBF
immediately in some cases, which is not implemented by this change.
This will lead to a longer reservation period of the TFI only, which
is safer than reassigning it too early.
Sponsored-by: On-Waves ehf
|
|
Currently the TBFs are registered in a TFI indexed array within the TRX
objects. TBFs can be searched globally by TFI and TRX number. This
conflicts with the use of the same TFI for different TBF on different
PDCH. This use case requires the specification of the PDCH as
additional search dimension.
This commit moves the TFI index TBF arrays into the PDCH objects. The
related methods are updated accordingly.
Ticket: #1793
Sponsored-by: On-Waves ehf
|
|
Currently the TFI are managed per TRX, thus only a maximum of 32 TBF
per direction and per TRX are possible simultaneously.
This commit modifies algorithm_a() to allow the sharing of TFI
between different PDCH. Since algorithm A only assigns a single slot
to each TBF, the TFI of each PDCH can be assigned independently.
This increases the maximum to 32 TBF per direction and per PDCH
concerning the TFI allocation.
Ticket: #1793
Sponsored-by: On-Waves ehf
|
|
Currently the TFI and the TRX have to be determined before the actual TBF
allocation function is called, passing TFI and TRX number as
parameters. This does fit to TFI reuse for different slots, since
this were tightly coupled with the slot selection.
This commit just moves the TFI selection into the alloc_algorithm
functions. The tfi parameter is removed from the the TFI alloc
functions. The trx parameter is changed into use_trx to optionally
limit the trx selection (same semantics like in tfi_find_free).
Sponsored-by: On-Waves ehf
|
|
Currently is is rather expensive to get TFI and USF usage per PDCH,
because the TBFs need to be scanned to get that information.
This commit adds corresponding bit sets which get updated by the
attach_tbf/detach_tbf methods of the gprs_rlcmac_pdch class.
Sponsored-by: On-Waves ehf
|
|
Since both TBF are based on the same reservation which means that
they should be compatible with respect to the slot usage, and since
the new TBF has not been forced to single slot usage, an update of
the allocation is not necessary now.
This commit removes the call to update() from within reuse_tbf().
Sponsored-by: On-Waves ehf
|
|
The call to tbf_alloc_dl_tbf misses the pointer to the GprsMs object
which is already known in that case (tbf_reuse). This leads to a full
reallocation of the PDCH slots, which is possibly incompatible with
the old set of slots. This can result in hanging TCP connections and
TCP connection failures.
This commit replaces the old NULL value by the actual GprsMs object.
Since the set_ms() is also done within the tbf_alloc_dl_tbf method,
that call is removed.
Sponsored-by: On-Waves ehf
|
|
Currently algorithm A bases its time slots selection on the number of
TBF actively using the PDCHs. This statistically prefers the first
time slots, especially with short living TBFs. So when the first TBF
is triggered by an uplink transfer (which generally results in a
short-lived TBF) the potentially longer living DL TBF will be bound
to the same slot. When another MS then requests an uplink TBF, it
will get the same slot (no UL TBF currently active).
This commit changes the algorithm to base its selection on reserved
slots instead.
Sponsored-by: On-Waves ehf
|
|
Currently only the first enabled PDCH will be used. Beside the
throughput this will also limit the number of TBFs:
- number of UL TBFs <= 7
- number of DL TBFs <= 32
This commit changes the allocation algorithm to use the PDCH with the
least number of attached TBFs. This will improve the troughput in
both directions and the UL limits:
- number of UL TBFs <= min(32, N_PDCH * 7) UL TBFs
Ticket: #1794
Sponsored-by: On-Waves ehf
|
