From c9c2a6149757c091c094c9e30d210d50923e7cc3 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Sun, 15 Jul 2012 15:07:54 +0200 Subject: v3 final with gerber output --- hardware/gerber/ohm4_ocxo.gpi | 56 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 hardware/gerber/ohm4_ocxo.gpi (limited to 'hardware/gerber/ohm4_ocxo.gpi') diff --git a/hardware/gerber/ohm4_ocxo.gpi b/hardware/gerber/ohm4_ocxo.gpi new file mode 100644 index 0000000..306ddf6 --- /dev/null +++ b/hardware/gerber/ohm4_ocxo.gpi @@ -0,0 +1,56 @@ +Generated by EAGLE CAM Processor 6.2.0 + +Photoplotter Info File: /home/eagle/eagle/ohm4_ocxo/gerber/ohm4_ocxo.gpi + + Date : 15 Jul 2012 13:03:50 + Plotfile : /home/eagle/eagle/ohm4_ocxo/gerber/ohm4_ocxo.gts + Apertures : generated: + Device : Gerber RS-274-X photoplotter, coordinate format 2.4 inch + +Parameter settings: + + Emulate Apertures : no + Tolerance Draw + : 0.00 % + Tolerance Draw - : 0.00 % + Tolerance Flash + : 0.00 % + Tolerance Flash - : 0.00 % + Rotate : no + Mirror : no + Optimize : yes + Auto fit : yes + OffsetX : 0inch + OffsetY : 0inch + +Plotfile Info: + + Coordinate Format : 2.4 + Coordinate Units : Inch + Data Mode : Absolute + Zero Suppression : None + End Of Block : * + +Apertures used: + + Code Shape Size used + + D10 draw 0.0000inch 8 + D11 round 0.1300inch 4 + D12 round 0.0560inch 4 + D13 rectangle 0.0434inch x 0.0473inch 20 + D14 draw 0.0560inch 3 + D15 rectangle 0.0473inch x 0.0434inch 8 + D16 round 0.0790inch 1 + D17 round 0.1090inch 4 + D18 draw 0.0640inch 4 + D19 rectangle 0.0670inch x 0.0500inch 2 + D20 rectangle 0.0720inch x 0.0060inch 1 + D21 rectangle 0.0906inch x 0.0276inch 8 + D22 rectangle 0.0500inch x 0.0670inch 2 + D23 rectangle 0.0060inch x 0.0720inch 1 + D24 rectangle 0.0520inch x 0.0920inch 3 + D25 rectangle 0.1457inch x 0.0906inch 1 + D26 rectangle 0.0453inch x 0.0434inch 1 + D27 rectangle 0.0906inch x 0.0453inch 2 + D28 rectangle 0.0434inch x 0.0453inch 1 + D29 rectangle 0.0453inch x 0.0906inch 2 + -- cgit v1.2.3