Age | Commit message (Collapse) | Author | Files | Lines |
|
Fix parsing of the 'subscriber-create-on-demand random' VTY: atoi() is not
enough to include the specified range of 1-9999999999.
Use atoll() instead to ensure a large enough number space also on 32bit
systems.
(Note: for me, atoll() truncates at 32 bit when <stdlib.h> is not included.)
Add a VTY regression test for this.
Related: OS#2253
Change-Id: I353e04481ec567adca383d6b51ba8fb865eed73e
|
|
Use new function available in libosmocore to set up timers. Compile
tested only.
Change-Id: Ibcfd915688e97d370a888888a83a7c95cbe16819
|
|
Change-Id: Ief81db0b3653fec180e60776ff9bcb0ac1357217
Related: OS#1614
|
|
Change-Id: I04b2ec1115f6207bd238489db9317bfaee58f3bc
|
|
* move value_string definition and corresponding functions for BTS type
to shared header to make it re-usable by OsmoBTS
* use consistent function naming
* add similar functions for BTS variant
* add enum to be used by OML Attribute Reporting to distinguish between
type, variant and other info
Change-Id: Ida94725a6fce968443541e3526f48f13758031fd
Related: OS#1614
|
|
Hold on with the GSM 04.11 RP-ACK/RP-ERROR that we send to the MS until
we get a confirmation from the ESME, via SMPP DELIVER-SM-RESP, that we
can route this sms somewhere we can reach indeed.
After this change, the conversation looks like this:
MS GSM 03.40 SMSC SMPP 3.4 ESME
| | |
| SMS-SUBMIT | |
|------------------->| |
| | DELIVER-SM |
| |---------------->|
| | |
| | DELIVER-SM-RESP |
| |<----------------|
| GSM 04.11 RP-ACK | |
|<-------------------| |
| | |
Before this patch, the RP-ACK was sent back straight forward to the MS,
no matter if the sms can be route by the ESME or not. Thus, the user
ends up getting a misleading "message delivered" in their phone screen,
when the message may just be unroutable by the ESME hence silently
dropped.
If we get no reply from the ESME, there is a hardcoded timer that will
expire to send back an RP-ERROR to the MS indicating that network is
out-of-order. Currently this timer is arbitrarily set to 5 seconds. I
found no specific good default value on the SMPP 3.4 specs, section 7.2,
where the response_timer is described. There must be a place that
describes a better default value for this. We could also expose this
timer through VTY for configurability reasons, to be done later.
Given all this needs to happen asyncronously, ie. block the SMSC, this
patch extends the gsm_sms structure with two new fields to annotate
useful information to send the RP-ACK/RP-ERROR back to the MS of origin.
These new fields are:
* the GSM 04.07 transaction id, to look up for the gsm_trans object.
* the GSM 04.11 message reference so the MS of origin can correlate this
response to its original request.
Tested here using python-libsmpp script that replies with
DELIVER_SM_RESP and status code 0x0b (Invalid Destination). I can see
here on my motorola C155 that message cannot be delivered. I have tested
with the success status code in the SMPP DELIVER_SM_RESP too.
Change-Id: I0d5bd5693fed6d4f4bd2951711c7888712507bfd
|
|
Instead of hardcoded value of 1 plus comment of the right hand side of
the statement.
Change-Id: I865bdbd6da17a0389044a8e749deeeebcb9cae06
|
|
Requires libosmocore with Ib63b6b5e83b8914864fc7edd789f8958cdc993cd.
Change-Id: Ib94db414e94a2a1f234ac6f1cb346dca1c7a8be3
|
|
Remove duplicated code and make sure that python code is actively used
as part of test harness
Change-Id: I676390abe2f179df6004cdd33d0eaaf60e18df03
|
|
Use textual representation for message type and protocol descriminator
in case of Gb parsing errors.
Change-Id: Ida925258be119619d8705361730c554a130b75bc
Related: SYS#3610
|
|
Define subscriber-list-active-v1 ctrl command as RO and remove
unnecessary functions.
Change-Id: I88fe905c22cf7563415d470b88cb43fca0d52a7f
|
|
Previously vty always used additional checks even for GEA0 (no
encryption) which resulted in misleading warnings. Fix this by
adding explicit check for GEA0.
Related: SYS#3610
Change-Id: I1ee468ab3298076d4cb5c7b1f6293c07e272417b
|
|
Previously we required pcap.h unconditionally which causes embedded
build failure because it's not included in current version of out poky
toolchain. We can add it to toolchain but it's only necessary for
utils/osmo-meas-pcap2db which is not built for sysmobts anyway so it's
easier to just make this dependency optional and build osmo-meas-pcap2db
only if it's available - similar to the way we build osmo-meas-udp2db.
Related: SYS#3610
Change-Id: I77a5f7eafe0282abedacffad6a9bcb0a8f2b5caa
|
|
Previously it was only in gsm_bts_model which is not initialized on BTS
side. It's more convenient to have it in the struct which is available
to BTS as well.
Change-Id: I54fde8c4ccd5d994af08074f5864446e79a93a25
Related: OS#1614
|
|
Supporting SI2quater as per 3GPP TS 44.018 will require chnages to the
way System Information is stored because it uses 1:n instead of 1:1
mapping between SI type and generated SI content. This should not affect
other SI types though. To facilitate this transition:
* convert the code to always use GSM_BTS_SI helper instead of accessing
buffer directly
* make helper more robust by adding extra parenthesis
* add similar helper for gsm_lchan
* add function estimating number of SI2quater message to hold configured
number of (U|E)ARFCNs
* add SI2q index/count fields and pass them to rest_octets generator
explicitly
* internalize buffer access in generate_si* functions
Change-Id: I74e4e3cb86364cec869a1472a41b4a95af0d50dd
Related: RT#8792
|
|
When BTS reports PCU disconnect - clear it.
Change-Id: Idb32c73036413ee912f633604150ee17b611cfa7
Related: OS#1615
|
|
Change-Id: Ic8144777a77efce4bad44abf6c6abde12fc5149c
Related: SYS#3610
|
|
OpenBSC does not produce any installable libraries, only header files so
this section is unnecessary.
Change-Id: I4c563d775a84f41f82404e0eaba1a25fdbaac1a5
|
|
* set proper flag when saving MS Timing Offset
* use gsm_subscriber's IMSI or lchan's name if bsc_subscriber is unknown
* add comments with spec reference
* store/display MS Timing Offset instead of raw Timing Offset field from
RSL
* Compute MS Timing Offset [-63; 192] from Timing Offset field [0; 255],
adjust structure gsm_meas_rep with proper type to store it
Change-Id: I7e003d23a6edb714c5f17688fd6a8edac131161d
Related: OS#1574
|
|
According to man, lineptr must be set to null AND n to 0.
Change-Id: I36683884106b97ef697264716de13813c00da9bc
|
|
It is defined in the file and used twice in there, so let's use it for
all of them which makes code smaller and more clear.
Change-Id: I9fac7cabedff74f8f6293ad8b54420229b80aa71
|
|
* add version string to gsm_bts
* add PCU version string to gsm_bts
* rename GSM_BTS_TYPE_OSMO_SYSMO -> GSM_BTS_OSMOBTS to avoid confusion
between BTS model and variant
* add variant enum to gsm_bts_model using enum with variants for each
hw vendor of OsmoBTS
* show connected PCU version (if available) in vty via 'show bts'
This will come in handy when logging details regarding particular BTS
reported via OML, see:
Related: OS#1614
Change-Id: I6710d53115f34634a7b70969cc05fd5c72ff8ab2
|
|
Log expected ACK messages and unhandled messages to aid in
troubleshooting.
Change-Id: Id3afaaa76e24f63076ae0e6fd2322e4a7fa29b45
Related: OS#1614
|
|
Change-Id: Ie120273eabbc670e9f19ba365508688a810a2773
Related: SYS#3028
|
|
This option allows to enable or disable TCH/F allocation on the
TCH/F_TCH/H_PDCH timeslots. Until now, source code modification
was required to enable this feature.
Related: OS#1778
Change-Id: Id18cab25844dc854a66b4e2713e90c3f43afa712
|
|
From a human admin viewpoint it doesn't make sense to count the messages sent:
When we use TMSIs, we first send a LU Accept with a new TMSI, and then expect
the MS to respond with a TMSI Realloc Complete message. When that fails to come
through, the LU actually ends in failure, even though a LU Accept was sent.
If a conn breaks/vanishes during LU, we cancel the LU without sending any reply
at all, so the failed LU would not be counted.
Instead, count Location Updating results, i.e. completion and failures.
(With the new VLR developments, LU counters need to be triggered in completely
different places, and this patch prepares for that by providing sensible
counters.)
Change-Id: I03f14c6a2f7ec5e1d3ba401e32082476fc7b0cc6
|
|
Explicitly check for and log PCU version received from BTS via OML alert
message.
Change-Id: I3c88663d4e2887a4038b4c3f1387128295b8934e
Related: OS#1614
|
|
Add python client which converts TRAP messages into SOAP requests and
perform corresponding actions.
It can be used as follows
./soap.py -d -w http://example.com/soapservice/htdocs/wsdl/test.wsdl
See ./soap.py -h for additional options.
Change-Id: I82844ec7a302bac30d6daee9ebca2188fd48ca46
Related: SYS#3028
|
|
message
ericsson can handle a reference at the end of a imm assign command which is used in
the confirm response. The confirm response is only sent if the trailer is present.
Change-Id: I88560291b5a3a3d7a0bac4d3c089b45f1f6b297f
|
|
Change-Id: I66541f9b20e7fd67fbec329283fc3c821c970a56
|
|
This seems to be mandatory when an Ericsson RBS2000 uses a SuperChannel
as back-haul.
Change-Id: I793e7d62df1ca9f9c38d39e22d3868064d446c8d
|
|
Also set MO FSMs to NULL after freeing them.
Change-Id: I30df0b9ab8bc47ba9756c8388e977deed0e40200
|
|
When the BTS is configured to use a SuperChannel and it is using a
unix domain socket based transport towards the L2TP daemon, then
we must instruct the L2TP daemon to instruct the SIU to change the Abis
Lower Transport Mode using the ALTCRQ / ALTCRP L2TP signalling.
Change-Id: I672bfaa09c42fbeb0c8459f24b2222b952de954b
|
|
Do not print anything to stdout directly - use proper logger object
instead: either the one supplied by IPAFactory user or default to NO-OP
NullHandler logger.
Change-Id: Ic3417095a6e8848f0acabb46a9e64c0197b736e2
Related: SYS#3028
|
|
Adjust version string to comply with PEP8 and PEP386.
Change-Id: I44c8521f12e6432038998bfb1ac1bb37a1137787
Related: SYS#3028
|
|
The VTY tests assume that $top_builddir == $top_srcdir. Use the script's
location from sys.path[0] to find the correct locations of example configs even
when building in another directory.
Change-Id: I2731f361e3b72d0980968e6cf83594ea450db7c2
|
|
Fixes: coverity scan CID 163918
Change-Id: I4b2760b006a0707928530b4390c6997b79b02981
|
|
Previously any OML NACK message will result in BSC dropping OML link to
BTS which makes it impossible to use optional OML messages which might
be unsupported by BTS. Fix this for 3GPP TS 52.021 §8.11.1 Get
Attributes message. Also, log human-readable NACK name to see what
exactly causing OML link drop.
Change-Id: Ib8af2872c27abb793172ec59bdc145b8d54f83da
Related: OS#1614
|
|
In change-id Iadf43f21e0605e9e85f7e8026c40985f7ceff1a3, libosmocore changes
from incrementing SQN after tuple generation to incrementing SQN before tuple
generation. Thus we now need to pass desired_sqn - 1 to get the same tuples.
Change-Id: Ifeda71e713bb60dcd31ac651f461b714cfa39b5c
Related: OS#1968 OS#1969
|
|
So far: CF-IS-CON-TF
Now: CF-TF-CON-IS
Change-Id: I8efd9bafdcf9504d2e5fc85c44c708fa53f4dff8
|
|
The timer T3186, which is described in 3GPP TS 44.060, is using 3
bits of the si13 mac block. This requires special encoding. In the
case of T3186, the value is encoded by the formula: bits = t/500-1.
Our implementation uses the formula bits=t/500, which is incorrect.
Change-Id: Ifd340c536cff2d1c4b1b3677a358ea95438801eb
|
|
Option "logging level ... everything" is broken for quite some time and
might be deprecated in future. Replace it with "logging level ... debug"
in config examples.
Change-Id: I828ef7671b4fb38717526a18ff8e9a5428cd511e
Related: OS#71
|
|
The -V option to display the Version and the copyright info
is missing.
Change-Id: I0c848fd42c13f473807caf3478d32c6ce5e43e31
|
|
When using a BSC located PCU the BSC must understand PDCH requests.
Change-Id: Ie7f4ed000cf1b40d269873cf0ddf5ff9f5bbc18a
|
|
bsc_control.py lacks a copyright header. This commit adds the
copyright header from ipa.py to bsc_control.py.
Change-Id: Ie70bf686ee9bb157198e02bf8d946abf56adc82a
|
|
Fix uninitialized memory access warning.
"Conditional jump or move depends on uninitialised value"
Found by valgrind.
Change-Id: Ibc2d585c5db899e6af20104211e32faf3822633a
|
|
osmo-python-tests now includes code that retries connecting the VTY socket and
needs no external sleep()ing. This flies through most tests without any sleep()
at all.
See osmo-python-tests.git change-id Icc337f52a93d5fe31fc4ff235ccaf4e0fe75fa39
Change-Id: I42161d9716fe5bb0ef1c56e4bfb770bb99bbca7a
|
|
openbsc only starts sabm messages for a subset of line drivers.
Add unixsocket to those subset.
Change-Id: If98c037119142cc33b46ab5c1bf02d4cda81c81e
|
|
Change-Id: I45708df724c5fc3316eca6bd2ac2c0738b19a45b
|
|
In a future commit, gsm_subscriber will be replaced by vlr_subscr, and it will
not make sense to use vlr_subscr in libbsc. Thus we need a dedicated BSC
subscriber: struct bsc_subscr.
Add rf_policy arg to bsc_grace_paging_request() because the bsc_subscr will no
longer have a backpointer to gsm_network (used to be via subscr->group).
Create a separate logging filter for the new BSC subscriber. The implementation
of adjusting the filter context is added in libbsc to not introduce
bsc_subscr_get/_put() dependencies to libcommon.
During Paging Response, fetch a bsc_subscr from the mobile identity, like we do
for the gsm_subscriber. It looks like a duplication now, but will make sense
for the VLR as well as for future MSC split patches.
Naming: it was requested to not name the new struct bsc_sub, because 'sub' is
too ambiguous. At the same time it would be fine to have 'bsc_sub_' as function
prefix. Instead of struct bsc_subscriber and bsc_sub_ prefix, I decided to
match both up as struct bsc_subscr and bsc_subscr_ function prefix. It's fast
to type, relatively short, unambiguous, and the naming is consistent.
Add bsc_subscr unit test.
Related: OS#1592, OS#1594
Change-Id: Ia61cc00e8bb186b976939a4fc8f7cf9ce6aa3d8e
|