aboutsummaryrefslogtreecommitdiffstats
path: root/openbsc/src
AgeCommit message (Collapse)AuthorFilesLines
2017-03-16log protocol discriminators and message types by namesysmocom/iu_before_collapseNeels Hofmeyr1-6/+8
Depends: libosmocore change-id I0fca8e95ed5c2148b1a7440eff3fc9c7583898df Change-Id: If1c49faf6e1757cb16b383dd2db87b48bc94eee6
2017-03-16log: ciphering/security are implicit CM Service AcceptNeels Hofmeyr3-5/+25
Log just as prominently to mark CM Service Accept. Change-Id: I7afe9d4f69e5525ede7a7c380a2c48fb2c5054b6
2017-03-16debug log: upon bumping a conn, say why it is keptNeels Hofmeyr7-14/+45
Change-Id: I378af1fa06d8a45c01a80a381be143572e1dc41f
2017-03-16allow CM Service Request on already open connectionNeels Hofmeyr1-4/+59
Change-Id: I3c4687aafe495e60b1568e6505dbf847adab37f1
2017-03-16more specifically conclude cm service requestsNeels Hofmeyr4-12/+8
Don't end a CM Service Request "lock" too indiscriminately. Trigger only on new transactions that start. Change-Id: I4f64b8d91cfb1e61be4563594b2d6b23144af5bc
2017-03-16remove cruft: old anchor and auth codeNeels Hofmeyr2-64/+0
Change-Id: I16ceeeede46f244fd454758cc223673dd51cfc72
2017-03-16mostly cosmetic: have one msc_conn_close() with cause argumentNeels Hofmeyr3-13/+16
Change-Id: Ied7663f856cfce6e7ed1c0314fd558af85091dcc
2017-03-16Reinstate msc subscriber conn ref countingNeels Hofmeyr7-52/+47
Indeed the easiest way of ensuring all code paths can cause conn discarding while still all code paths can check on whether a conn needs to be discarded. Change-Id: I641fe36d9fa2077e3caf63cc583aaa380603bff0
2017-03-16compiler warning mgcp fuNeels Hofmeyr1-1/+1
Change-Id: I79a891dbaff3cd6aec5a0ab08435e4619ade62d2
2017-03-16mgcp: hack RAB success from nano3G: patch first RTP payloadNeels Hofmeyr1-0/+9
The ip.access nano3G needs the first RTP payload's first two bytes to read hex 'e400', or it will reject the RAB assignment. Add flag patched_first_rtp_payload to mgcp_rtp_state to detect the first RTP payload on a stream, and overwrite its first bytes with e400. This should probably be configurable, but seems to not harm other femto cells (as long as we patch only the first RTP payload in each stream). Only do this when sending to the BTS side. Change-Id: If0887b0b7714fc204f2addab2d43d44bb283ba21
2017-03-16mgcp hack: don't change payload type when passing RTP thruNeels Hofmeyr1-0/+2
Change-Id: I9c43704a4c1e26d434c0d7e7ee370b2c21fb3399
2017-03-16remove all 3G authentication dev hacks -- it works!Neels Hofmeyr2-44/+2
Change-Id: I1204f388cf1311ec98b3eaf7505d7e18e73f03d0
2017-03-16implement utran security mode with vlrNeels Hofmeyr3-22/+35
Change-Id: Ib1e285b54cd7aaa0895e9c51a47720f446a07183
2017-03-16move iucs_ranap.[hc] to include / libmsc to use in msc_vlr testsNeels Hofmeyr5-15/+4
Change-Id: I99ca36857f5e4c9ae113017955611fd92256123c
2017-03-16vlr: allow setting assign_tmsi per-subscriberNeels Hofmeyr2-7/+15
Change-Id: I7469da0ed19e1e8b292422aadfd3ae2ebc2afd57
2017-03-16ensure authentication is required on UTRANNeels Hofmeyr3-5/+16
Change-Id: I9b9ad1379324f1405bd02a05fcd7ef8c53bacbde
2017-03-16vlr on utran: transmit CommonIDNeels Hofmeyr5-1/+32
Change-Id: Ice3c71f048b097f2c2de8bd4f4508a7ca2cb1cf5
2017-03-16msc: decouple from bsc_api and btsNeels Hofmeyr2-6/+6
Change-Id: I3564291a6d20da13a8d75c71b0c425da4948d412
2017-03-16make python tests pass for new OsmoMSCNeels Hofmeyr4-36/+34
Change-Id: I59bf6503a2f822e9b6078c0fd24643df9a2dab3c
2017-03-16Make the code work so that the msc_vlr tests passNeels Hofmeyr14-379/+155
Change-Id: Ie8814d856bbe4c111007a696a4d26576854c134f
2017-03-16mark fixme: rate countersNeels Hofmeyr1-0/+3
Change-Id: I45651fd4cf3f4da8ad67251bbb3b627888e76d9c
2017-03-16mgcp: log payload type changeNeels Hofmeyr1-0/+2
Change-Id: Iee5fa667dece12174b1933345c1ed640a264ed97
2017-03-16comment: fixme: rab failureNeels Hofmeyr1-0/+1
Change-Id: I6e21f2d7dd560ab15675f3e432c37a13c4ab6792
2017-03-16mgcp parsing, set port from mgcp responseNeels Hofmeyr1-2/+4
Change-Id: I90e2c1aa7575d5fa6e0374f5022cbb25fc3f7699
2017-03-16mgcp parsing, mgcp testNeels Hofmeyr3-104/+236
Change-Id: Ibe2ab17b3fa3a506a2e841ba979ea4175e3a21e8
2017-03-16mgcp: handle responses from the MGCP GWNeels Hofmeyr5-54/+251
Change-Id: I5c0493feaec775461b5a017c36b93cc2ad63c896
2017-03-16IuCS and IuPS: add VTY config for RAB Assignment address kindNeels Hofmeyr7-4/+74
To accomodate the ip.access nano3G without having to recompile, make the RAB Assignment's Transport Layer Address IE's format configurable, in both osmo-msc and osmo-sgsn. The long term perspective is to somehow detect which address encoding a given 3G cell prefers, but for the time being just configure it globally and set each ue_conn_ctx to the global setting upon creation. Add VTY command to iu_vty.c, with args passed to iu_vty_init() to insert at an arbitrary VTY node, so that it can be used both for osmo-msc and osmo-sgsn. Add generic iu_vty_config_write() to write out the config. Call iu_vty_init() from msc_vty_init(); msc_vty_init() is in libmsc, hence linking of osmo-msc now needs libiu to come after libmsc, so move that further down. Change-Id: I93728314742b327336f3fb6de98e6457f687e1f9
2017-03-16IuCS, IuPS: move flag to use X.213 NSAP addr into ue_conn_ctxNeels Hofmeyr3-6/+10
The future perspective is to remember the preferred RAB Transport Layer Address encoding for each 3G cell that is connected, so store per UE conn instead of globally hardcoding. Add rab_assign_addr_enc member to ue_conn_ctx. Thus the iu_rab_act_cs() and iu_rab_act_ps() functions no longer need the explicit use_x213_nsap argument. Add include/openbsc/common.h in order to define the enum nsap_addr_enc, in a separate file to be able to easily include it in all of libmsc, libiu and gprs/* without creating include cycles. Set the rab_assign_addr_enc when an MM ctx is created for iu, and whenever the ue_conn_ctx for an Iu MM ctx is updated. This looks a bit clumsy so far, the hope is that there will be a nice way to setup the ue_conn_ctx prior to that. Change-Id: I49bb5736df7bdfdd55d3e7b74ee559595cfd2f7d
2017-03-16iu: sort out confusion around asn_debug and asn1_xer_printNeels Hofmeyr4-21/+29
Before, I confused asn_debug with asn1_xer_print. Have two distinct VTY commands and fix documentation. Put the asn_debug and asn1_xer_print implementations in iu.c. Since they are globally defined, don't pass a pointer to iu_vty_init() but just use it directly. Might be considered less clean, but is also less bloat. Change-Id: Iccbadfe1585ba224f74cdfb5273b5ce29b6d78f0
2017-03-16IuCS: rapidly release connectionsNeels Hofmeyr3-4/+26
Do the same as we do in 2G: release the connection as soon as nothing else is pending for a given subscriber. Before, osmo-msc would wait for the UE "to get bored" and send an Iu release. But the CN should stay lean on connections. Also, 25.413[1] in section 7, 6th point states: "While the Iu release is managed from the CN, the RNC has the capability to request the release of all Iu connection resources from the corresponding Iu connection." So far we did not manage Iu release from osmo-msc at all. Use the same mechanism we use in 2G: from msc_release_connection(), just before freeing the gsm_subscriber_conn, invoke a CN initiated Iu Release command to the UE. This works around OS#1816 ("USSD only works when IuCS is released", on nano3G), because the Iu conn is now released right after every signalling, so that typically no two requests will use the same conn. In iu.h/iu.c, add iu_tx_release(), absorbing almost all of the code from ranap_handle_co_iu_rel_req(). Add stub to db_test.c, necessary to build it without linking libiu. [1] 3GPP TS 25.413 v12.4.0 Release 12 / ETSI TS 125 413 V12.4.0 (2015-04) Related: OS#1816 Change-Id: Ic12bd6f3666f6fd42bd6d9fdae1c93abee3b6786
2017-03-16IuCS: don't remove Iu conn until release FIXMENeels Hofmeyr1-0/+6
Don't remove the gsm_subscriber_connection without an Iu Release. The 2G paradigm is to close a subscriber connection as soon as nothing else is pending. In 3G however, the conn is often discarded even though the IuCS stays open and valid, which confuses the situation: before the UE releases a bit later, we would try to page the subscriber unsuccessfully, because the UE expects to already be connected. To first fix the discrepancy of Iu vs. subscr release, never discard gsm_subscriber_connections when msc_release_connection() is called. This creates a "lazy" CN that keeps connections open as long as the UE will tolerate. It is really fast in sending many SMS in close succession, but is certainly a bad CN design choice: we should rather stay lean on connections. A subsequent commit will change this, but I decided to keep this commit as a reference, for when we'd like to test situations that should re-use an established connection. Change-Id: I012378cfa432d791146db387554ec1909de05297
2017-03-16mgcp dbg logNeels Hofmeyr2-6/+98
Change-Id: I56fda48edaa92abfc6e3886cdfce733bb0686f73
2017-03-16IuCS: store assigned rab_id in gsm_subscriber_connectionNeels Hofmeyr1-2/+3
Change-Id: I7fda4304631fc24bbd1bebe911b8403a942fcf53
2017-03-16bridge calls via mgcpgwNeels Hofmeyr2-2/+30
Change-Id: Ie259e30bc532fe9817c96562022ac33443d5747a
2017-03-16also do call assignment for MT calls, upon Call ConfirmedNeels Hofmeyr1-0/+2
Change-Id: I863fa73948f61aaffd7f4472f3abc3e44228e31f
2017-03-16IuCS: implement msc_call_assignment() for IuCSNeels Hofmeyr1-1/+81
Send IuCS RAB Activation upon MNCC_CALL_PROC_REQ. Implement function msc_call_assignment(): decide between sending A-iface BSSMAP Assignment Request or IuCS RAB Assignment Request. Implement iu_rab_act_cs() to send the IuCS RAB Assignment Request. The IP address and port of the MGCPGW sent in the RAB Assignment are still hardcoded. The A-interface extension is not implemented yet. Declare ranap_new_msg_rab_assign_voice() to avoid including ranap_msg_factory.h, which would require adding ASN1 CFLAGS to Makefile.am. The mgcpgw_client as well as some more osmo-iuh functions are now linked from libmsc, hence add some dummy stubs to libiudummy and db_test.c. Change-Id: Iaae51d1fbbfc28fad1c0b85e161d53d80a420a19
2017-03-16msc: add mgcpgw client (with dummy read cb so far)Neels Hofmeyr3-0/+22
Store the mgcpgw client data in struct gsm_network. Initialize VTY and bind the client. Change-Id: Ifc4efb1ca44fa34c29bf23b35addb54155296d68
2017-03-16libmgcp: add mgcpgw client APINeels Hofmeyr3-0/+427
Add an API to send MGCP messages to an MGCP GW, from the perspective of an MSC instructing the GW to setup RTP streams. Rationale: the mgcp_protocol.h is mostly for the MGCP GW itself, other implementations forward incoming MGCP messages. So a simpler approach for an MGCP GW client is useful. Add general VTY commands that can be used to configure mgcpgw_client. osmo-msc is going to use this to route RTP streams (for 3G at first). Change-Id: I6fe365c4c89207f2172943cc456b508a207b1135
2017-03-16libmgcp: add value strings for mgcp_connection_modeNeels Hofmeyr2-0/+33
Add file mgcp_common.c to implement the value strings for the mgcp_connection_mode. Add in a separate file because of the upcoming mgcpgw_client.c implementation, introducing a file that contains implementations commonly used in MGCP GW as well as its clients. Change-Id: I6fe365c4c89207f2172943cc456b508a207b1135
2017-03-16IuCS: cosmetic prep for msc_call_assignment()Neels Hofmeyr2-3/+14
Rename gsm48_cc_tx_call_proc() to gsm48_cc_tx_call_proc_and_assign() to mark the place where the A-interface will send a BSSAP Assignment Request / where the IuCS-interface will send a RAB Assignment Request. Add function msc_call_assignment() to decide between A-iface and IuCS assignment, to be implemented in subsequent commit. Change-Id: I0695e233d57d13658793b0e63bb7c3ff224909a0
2017-03-16IuCS: send RANAP CommonIDNeels Hofmeyr2-0/+38
Add libiu function to send a CommonID message down a UE connection, iu_tx_common_id(); add also a corresponding stub to libiudummy for linking with tests. Add libmsc function msc_tx_common_id() to call the above. Add this mostly to clearly indicate in msc_ifaces.h that libmsc is calling out of the MSC; also to do conn->via_iface checking. Call msc_tx_common_id() after ciphering is established, in _gsm48_rx_mm_serv_req_sec_cb()'s GSM_SECURITY_SUCCEEDED case. Change-Id: I576ddd5bbabfc989149debd2f8a9743db6d26043
2017-03-16cosmetic: msc_handler, bsc_handler: drop extra whitespaceNeels Hofmeyr1-1/+1
The extra ws made me not find these lines when grepping for 'dtap ='. Change-Id: I45e5c9e7df4704546872aab15adf407298943435
2017-03-16cosmetic: make gsm0408_loc_upd_rej() staticNeels Hofmeyr1-1/+1
2017-03-16LU counters: count completion and failure, not messages sentNeels Hofmeyr2-8/+4
From a human admin viewpoint it doesn't make sense to count the messages sent: When we use TMSIs, we first send a LU Accept with a new TMSI, and then expect the MS to respond with a TMSI Realloc Complete message. When that fails to come through, the LU actually ends in failure, even though a LU Accept was sent. In 3G, if a UE sends an Iu Release during LU (e.g. user enables flight mode), we cancel the LU without sending any reply at all, so nothing would be counted. Instead, count Location Updating results, i.e. completion and failures.
2017-03-16remove handle_abisip_signal()Neels Hofmeyr1-71/+0
Change-Id: I9cf80f9c2c8a53a29e42f000029e680a9922cb41
2017-03-16gsm0408_clear_request(): actually free the released connNeels Hofmeyr1-0/+2
By having conn->in_release == 1, calling msc_release_connection() has no effect and thus never frees the conn. So, after all pending requests have been discarded, also discard and free the unused connection.
2017-03-16add iu.h to gsm_subscriber.cNeels Hofmeyr1-0/+1
Change-Id: I398aaa4a7328a58fb0d563725f3bea26482929ef
2017-03-16gsm_04_08.c: iu.hNeels Hofmeyr1-0/+1
Change-Id: I624612b5d5cd70770326347634aee2a42ba88945
2017-03-16temporary dev: set debug log level almost everywhereNeels Hofmeyr1-17/+17
Change-Id: I0d5a36560e7edde27497de57e579f5b1d00eb525
2017-03-16move to libbsc: lchan_next_meas_rep() -- TODO really?Neels Hofmeyr2-13/+13
Change-Id: I4ea799c5fa61f81c404e6ef1b9ac86a8faa1fb49