osmo-bts (0.6.0) unstable; urgency=medium [ Holger Hans Peter Freyther ] * Initial release. * misc: Ignore files generated by a debian packaging build * jenkins: Add the build script from jenkins here * jenkins: Add the build script from jenkins here * sysmobts: Add the barebox boot state reservation * sysmobts: Fix eeprom padding before gpg key * ci/spatch: Remove the "static" analysis handling * oct: Attempt to enable the Octphy for the osmo-bts-oct build * debian: Use the header files installed by openbsc-dev * build: Do not require more headers from OpenBSC * sysmobts: Make reservation for mode/netmask/ip and suc * sysmobts: Store a simple network config in the EEPROM as well [ Max ] * Ensure TRX invariant * Use libosmocore function for uplink measurements * Fix debug output * Fix RTP timestamps in case of DTX * Add DTXd support for sysmoBTS and LC15 * Use libosmocodec for AMR RTP * octphy: Use the app. info. defaults as base * Fix debug output * DTXd: store/repeat last SID * DTXd: store/repeat last SID * DTXu: mark beginning of speech burst in RTP * Fix OML activation * TRX: Add vty command to power on/off transceiver * TRX: add configuration example * Add .gitreview * DTX: add support for AMR/HR * Move copy-pasted code into common part * Use libosmocodec functions for AMR * Use error values instead of number for RSL error * Clarify logging message * Make get_lchan_by_chan_nr globally available * DTXu: move copy-pasted code to common part * Remove duplicated nibble shift code * TRX: add Uplink DTX support for FR/HR * Mark array as static const * sysmobts: dump PRACH and PTCCH parameters * Activate PTCCH UL * Fix dsp tracing at phy config * octphy: fix build * Fill measurements data for L1SAP * sysmo: ts_connect: log channel combination name instead of number * DTX: fix last SID saving * DTX: fix SID repeat scheduling * DTX: fix SID logic * lc15, sysmo: Use SID_FIRST_P1 to initiate DTX * DTX: check Marker bit to send ONSET to L1 * DTX: remove misleading comment * LC15: Clarify msgb ownership / fix memory leaks * DTX: move scheduling check inside repeat_last_sid * DTX: further AMR SID cache fixes (lc15, sysmo) * DTX: move ONSET detection into separate function * DTX: send AMR voice alongside with ONSET * DTX: fix conversion from fn to ms * Move copy-pasted array into shared header * DTX DL: use FSM for AMR * TRX: fix building with latest DTX changes * DTX: fix array size calculation * DTX AMR - fix buffer length check * Replace magic number with define * Fix lc15 build * Extend RTP RX callback parameters * DTX HR - fix array size calculation * Fix DTX DL AMR SIDscheduling logic * Add tools to check DTX operation * DTX DL: split ONSET state handling * Remove obsolete define * DTX DL: add AMR HR support to scheduling check * DTX fix ONSET handling * dtx_check.gawk: Fix false-positives in DTX check * Fix tests linking with libosmocodec * DTX DL: tighten check for enabled operation * DTX: wrap FSM signal dispatching * Add libosmocodec for octphy build * dtx_check.gawk: add check for repetitive SID FIRST * Remove duplicated code * Replace link_id constant with define * DTX DL AMR: rewrite FSM recursion * Remove duplicated code * Fix AGCH/PCH proportional allocation * TRX: prevent segfault upon phy init * DTX: add explicit check if DTX enabled * Save RTP metadata in Control Buffer * osmo-bts-trx: fix lchan deactivation * DTX: fix TS adjustment for ONSET * Optionally use adaptive RTP jitter buffering * Integrate Debian packaging changes * DTX AMR HR: fix inhibition * Add copyright for .deb packages * Move code to libosmocore * Log socket path on error * Add Abis OML failure event reporting * Alarm on various errors * Remove obsolete define TLVP_PRES_LEN * scheduler: log lchan on which prim error occured * deb: use gsm_data_shared.* from openbsc-dev * OML: internalize failure reporting * Add ctrl command to send OML alert * Fix typo in TCH/H interleaving table * Use oml-alert CTRL command for temp report * Remove code duplication * Handle ctrl cmd allocation failures * Check for suitable lchan type when detecting HO * osmo-bts-trx: fix scheduling of broken frames * Sync protocol with OsmoPCU * vty: reduce code duplication * Handle TXT indication from OsmoPCU * Add MS TO to RSL measurements * Signal to BSC when PCU disconnects * Prepare for extended SI2quater support * Set BTS variant while initializing BTS model * Prepare for BTS attribute reporting via OML * osmo-bts-trx: use libosmocoding * Remove redundant test * Implement basic Get Attribute responder * Add version to phy_instance * OML: fix Coverity-reported issues * Re-add version to phy_instance * Use systemd template specifiers * Place *-mgr config examples according to BTS model * lc15: add example systemd service file * Extend Get Attribute responder * Set and report BTS features * Cleanup SI scheduling * RSL: receive and send multiple SI2q messages * RSL: check for abnormal SI2q values * lc15bts-mgr: use extended config file example * Move parameter file opening into separate function * Move common steps into common jenkins helper * lc15: add jenkins helper * Use generic L1 headers helper * Copy sysmobts.service to osmo-bts-sysmo * OML: move BTS number check into separate function * lc15: make jenkins helper executable * lc15: fix jenkins build * Add missing include for abis.h header file * RSL: receive and send multiple SI2q messages * Use release helper from libosmocore * si2q: do not consider count update as error * Cleanup example config files * Fix .deb build * Unify *.service files * lc15: cleanup board parameters reading * lc15-mgr: update parameter read/write * lc15: fix BTS revision and hw options * lc15: make default config usable * lc15: port lc15bts-mgr changes * lc15bts-mgr: separate service file * lc15: port lc15bts-mgr dependency changes * Simplify jenkins build scripts * OML: use fom_hdr while handling attr. request * osmo-bts-trx: fix 'osmotrx legacy-setbsic' * osmo-bts-trx: remove global variables from loops [ Daniel Laszlo Sitzer ] * octphy: Update outdated config param name in error message. [ Jason DSouza ] * Close TRX session before opening new one [ Minh-Quang Nguyen ] * l1sap.h: fix wrong L1SAP_FN2PTCCHBLOCK calculation according to TS 45.002 Table 6 * common/abis.c: fix 100% CPU usage after disconnecting OML/RSL link (Bug #1703) * LC15: Bring back DSP trace argument * LC15: Hardware changes * LC15: TRX nominal TX power can be used from EEPROM or from BTS configuration * rsl: Fix dropping of LAPDm UA message. * LC15: properly handle BS-AG-BLKS-RES as received from BSC [ Neels Hofmeyr ] * sysmo: add L3 handle to l1prim messages * pcu_sock: add pcu_connected() to query PCU availability * tests/stubs.c: remove unused stubs * fix typo in error message ('at lEast') * oml, Set Chan Attr: treat unknown PCHAN types as error * dyn PDCH: rsl rx dchan: also log ip.access message names * doc: add ladder diagram on dynamic PDCH, add msc-README * add missing DSUM entry to bts_log_info_cat * fix compiler warning: printf format for sizeof() * fix compiler warning: add missing case (PHY_LINK_CONNECTING) * fix two compiler warnings: add two opaque struct declarations * dyn PDCH: add bts_model_ts_connect() and _disconnect() stubs * dyn PDCH: conf_lchans_for_pchan(): handle TCH/F_PDCH * dyn PDCH: pcu_tx_info_ind(): handle TCH/F_PDCH in PDCH mode * dyn PDCH: chan_nr_by_sapi(): handle TCH/F_PDCH according to ts->flags * dyn PDCH: implement main dyn PDCH logic in common/ * dyn PDCH: sysmo-bts/oml.c: add ts_connect_as(), absorbing ts_connect() guts * dyn PDCH: sysmo: handle TCH/F_PDCH init like TCH/F * dyn PDCH: complete for sysmo-bts: implement bts_model_ts_*() * error log: two minor clarifications * debug log: log lchan state transitions * debug log: log TS pchan type on connect * fix lc15 build: put src/common/libbts.a left of -losmogsm * lc15: add L3 handle to l1prim messages * dyn PDCH: lc15: chan_nr_by_sapi(): handle TCH/F_PDCH according to ts->flags * dyn PDCH: lc15: add ts_connect_as(), absorbing ts_connect() guts * dyn PDCH: lc15: handle TCH/F_PDCH init like TCH/F * dyn PDCH: lc15: complete for litecell15-bts: implement bts_model_ts_*() * dyn PDCH: safeguard: exit if nothing pending in dyn_pdch_ts_disconnected() * vty: install orphaned trx nominal power command * fix compiler warnings: include bts_model.h in phy_link.c * fix compiler warning: remove useless 'static' storage class for struct decl * fix compiler warning: remove unused variable 'i' in calib_verify() * log: osmo-bts-trx: change access burst logs to DEBUG level * log: osmo-bts-trx: change PDTCH block logs to DEBUG level * osmo-bts-trx: init OML only once by sending AVSTATE_OK with OPSTATE_ENABLED * doc: move dyn_pdch.msc to osmo-gsm-manuals.git * error log: rsl.c: typo x2 * info log: l1sap.c: add '0x' to hex output * fix compiler warning: msg_utils.c: fn_chk() constify arg * fix compiler warning: msg_utils.c: fn_chk() constify arg * info log: l1sap.c: add '0x' to hex output * error log: rsl.c: typo x2 * dyn PDCH: code dup: use conf_lchans_as_pchan() * prepare dyn TS: split/replace conf_lchans_for_pchan() * code dup: join [rsl_]lchan_lookup() from libbsc and osmo-bts * dyn TS: common TCH/F_TCH/H_PDCH implementation * sysmo/oml.c: rename ts_connect() to ts_opstart() * dyn TS: implement SysmoBTS specifics * lc15/oml.c: rename ts_connect() to ts_opstart() * dyn TS: implement litecell15 specifics * comment typo: common/l1sap.c * log typo: trx_sched_set_pchan() * dyn TS: sysmo,lc15: chan_nr_by_sapi(): add missing assertion * fix comment in common/l1sap.c, function name changed * dyn TS, dyn PDCH: common/l1sap.c: properly notice PDCH * dyn PDCH: trx l1_if.c: factor out trx_set_ts_as_pchan() from trx_set_ts() * dyn PDCH: complete for trx: implement bts_model_ts_[dis]connect() * dyn PDCH: trx l1_if.c: drop fixme, add comment * dyn TS: complete for TRX * dyn TS: measurement.c: replace fixme with comment * sysmo,lc15: ts_connect_as(): log error also for pchan_as == TCH/F_PDCH * sysmo: fix dyn TS: Revert "Activate PTCCH UL" [in sysmobts] * log: l1sap: add 0x to hex output of chan_nr, 5 times * dyn TS: measurement: use correct nr of subslots, rm code dup * dyn TS: sysmo,lc15: ph_data_req: fix PDCH mode detection * Fix ip.access style dyn PDCH, broken in 37af36e85eca546595081246aec010fa7f6fd0be * common/rsl: move decision whether to chan act ack/nack to common function * octphy: fix build: Revert "octphy: fix for multiple trx with more than 1 dsp" * octphy: fix build: Revert "octphy: add support for multiple trx ids" * octphy: fix build with OCTSDR-OPENBSC-02.07.00-B708: name changed * dyn TS: if PCU is not connected, allow operation as TCH * log: sysmo,lc15: tweak log about sapi_cmds queue * log causing rx event for lchan_lookup errors * heed VTY 'line vty'/'bind' command * sysmobts_mgr, lc15bts_mgr: fix tall context for telnet vty * build: be robust against install-sh files above the root dir * configure: check for pkg-config presence * jenkins.sh: use osmo-build-dep.sh, log test failures * msgb ctx: use new msgb_talloc_ctx_init() in various main()s * jenkins-oct.sh: fix build: typo in deps path * fix 'osmo-bts-* --version' segfault * osmo-bts-trx: remove obsolete include of netif/rtp.h * add jenkins_bts_trx.sh * add jenkins_oct_and_bts_trx.sh * jenkins: add jenkins_bts_model.sh * bursts test: test_pdtch: pre-init result mem * fix: dyn ts: uplink measurement report * fix missing ~ in bit logic for lchan->si.valid in rsl_rx_sacch_inf_mod() * SACCH: fix sending of SI with an enum value > 7 * SACCH SI: assert that SI enum vals fit in bit mask * all models: fix vty write: bts_model_config_write_phy * jenkins: add value_string termination check * Revert "Add version to phy_instance" * Revert "RSL: check for abnormal SI2q values" * Revert "RSL: receive and send multiple SI2q messages" [ Harald Welte ] * sysmobts: screnrc/systemd-service: Use osmo-bts-sysmo instead of sysmobts * Add .mailmap for mapping mail addresses in shortlog * vty: Ensure to not use negative (error) sapi value * sysmobts: Add correct nominal transmit power for sysmoBTS 1020 * sysmobts_eeprom.h: Fix/extend model number definitions * Revert "sysmobts: Add correct nominal transmit power for sysmoBTS 1020" * tx_power: Change PA calibration tables to use delta vales * Add new unit-test for transmit power computation code * sysmobts: fully support trx_power_params * README: Add general project information and convert to markdown * README: update some of the limitations * sysmobts: Don't start with 0dBm TRX output power before ramping * Remove unusued left-over gsm0503_conv.c * scheduler_trx.c: Avoid code duplication for BER10k computation * scheduler_trx: Avoid copy+pasting determining CMR from FN * rx_tchh_fn(): Avoid copy+pasting formula to determine odd-ness of fn * Consistently check for minimum attribute/TLV length in RSL and OML * l1sap.c: Add spec reference to link timeout implementation * osmo-bts-trx: Remove duplicate parsing of NM_ATT_CONN_FAIL_CRIT * vty: Remove command for manual channel activation/deactivation * l1_if: Add inline functions to check dsp/fgpa version at runtime * sysmobts: Re-order the bit-endianness of every HR codec parameter * OML Add osmocom-specific way to deactivate radio link timeout * measurement: Remove dead code * l1sap.c: Factor out function to limit message queue * osmo-bts-sysmo/l1_if.c: PH-DATA.ind belongs to L1P, not L1C * l1sap: if lchan is in loopback, don't accept incoming RTP * TRX: Use timerfd and CLOCK_MONOTONIC for GSM frame timer (Closes: #2325) * Add loopback support for PDTCH * TRX: trx_if: Improve code description / comments * trx_if: Improve error handling * TRX: Rename trx_if_data() -> trx_if_send_burst() * TRX: merge/simplify l1_if and trx_if code * TRX: don't free l1h in trx_phy_inst_close() * l1sap: Don't enqueue PTCCH blocks for loopback * TRX: permit transmission of all-zero loopback frames * jenkins helpers: some minimal documentation/comments + print errors * VIRT-PHY: Initial check-in of a new virtual BTS * VIRT-PHY: Fix handling of default values for vty configuration * VIRT-PHY: Use IPv4 multicast groups for private / local scope * VIRT-PHY: cause BTS to terminate in case of recv()/send() on udp socket returns 0 * Ensure we don't send dummy UI frames on BCCH for TC=5 * virt: Don't print NOTICE log message if ARFCN doesn't match * VIRT-PHY: Report virtual RACH bursts with plausible burst type * scheduler: Fix wrong log subsystem: L1C is L1 *control* not user data * VIRT-PHY: Print NOTICE log message from unimplemented stubs * TRX / VIRT-PHY: Make check for BCCH/CCCH more specific * L1SAP: Print chan_nr and link_id always as hex * VIRT-BTS: Support for GPRS * L1SAP: Use RSL_CHAN_OSMO_PDCH across L1SAP * GSMTAP: Don't log fill frames via GSMTAP * TRX: Remove bogus extern global variable declarations * l1sap/osmo-bts-sysmo: Improve logging * TRX: Remove global variables, move SETBSIC/SETTSC handling into phy_link * Fix build after recent gsm_bts_alloc() change * Treat SIGTERM just like SIGINT in our programs [ Tom Tsou ] * trx: Add EGPRS tables, sequences, and mappings * trx: Add EGPRS coding and decoding procedures * trx: Enable EGPRS handling through burst lengths * trx: Fix coverity BER calculation NULL dereference [ Vadim Yanitskiy ] * pcu_sock: use osmo_sock_unix_init() from libosmocore * osmo-bts-trx/l1_if.c: use channel combination III for TCH/H * scheduler_trx.c: strip unused variable [ Mike McTernan ] * osmo-bts-trx: Fix PCS1900 operation * osmo-bts-trx: log decoder bit errors as DEBUG, not NOTICE [ bhargava ] * Change interface in osmo-bts for 11 bit RACH * Update parameters in osmo-bts-sysmo for 11bit RACH * 11bit RACH support for osmo-bts-litecell15 * Initialize parameters in osmo-trx for 11bit RACH [ Philipp ] * octphy: Fixing missing payload type in ph. chan. activation * octphy: Fixing band selection for ARFCN 0 * octphy: reintroducing multi-trx support * octopy: fixing renamed constant * octphy: prevent mismatch between dsp-firmware and octphy headers * rsl: improving the log output * octphy: multi-trx support: fix AC_CHECK order * RSL: drop obsolete NULL check * RSL: add assertions to check args of public API * OML: fix possible segfault: add NULL check in oml_ipa_set_attr() * CTRL: make the CTRL-Interface IP address configurable * l1sap: Fix expired rach slot counting * l1sap: fix missing 'else's causing wrong rach frame expiry counts * octphy: set tx attenuation via VTY * octphy: Improve OML ADM state handling [ Yves Godin ] * DTX: fix 1st RTP packet drop [ Alexander Chemeris ] * l1sap: Fix use-after-free in loopback mode. * vty: Add commands to manually activate/deactivate a channel. * trx: Add "maxdlynb" VTY command to control max TA for Normal Bursts. * rsl: Output RTP stats before closing the socket. * osmo-bts-trx: Fix MS power control loop. * osmo-bts-trx: Remove an unused variable. Resolves a compiler warning. * osmo-bts-trx: Increase a maximum allowed MS power reduction step from 2dB to 4dB. * Fix static build of osmo-bts-trx and osmo-bts-virtual. [ Jean-Francois Dionne ] * DTX: don't always perform AMR HR specific check * DTX: fix SID-FIRST detection * lc15,sysmobts l1_if: fix memleak in handle_mph_time_ind() * sysmo,lc15: fix memory leak at each call placed * DTX: fix "unexpected burst" error * Fix AMR HR DTX FSM logic. * Fix SACCH channel release indication not sent to BSC after location update. * Fix RTP duration adjustment not done when speech resumes in DTX mode. [ Ruben Undheim ] * Fix some spelling errors [ Holger Freyther ] * Revert "deb: use gsm_data_shared.* from openbsc-dev" [ Philipp Maier ] * octphy VTY: fix vty write output for octphy's phy section * octphy: Fix VTY commands * l1sap: fix rach reason (ra) parsing * l1sap: fix PTCCH detection * octphy: fix usage of wrong define constant * octphy: add CBCH support * l1sap: improve log output * octphy: print log message for multi-trx support * octphy: display hint in case of wrongly configured transceiver number * octphy: add conditional compilation to support latest octasic header release * octphy: set tx/rx antenne IDs via VTY * bts: revert trx shutdown order * octphy: activate CBCH after all physical channels are activated * octphy: align frame number for new firmware versions * octphy: ensure that 11 bit rach flag is not set * measurement: fix measurement reporting period * measurement: make lchan_meas_check_compute() available to l1sap.c * measurement: Compute measurement results on measurement idication * measurement: exclude idle channels from uplink measurement * octphy: integrate channel measurement handling * octphy: remove old event control code * osmo-bts-sysmo: Include frame number in MEAS IND * measurement: fix measurement computation * octphy: fix segfault * Revert "measurement: exclude idle channels from uplink measurement" * sysmobts: normalize frame number in measurement indication * measurement: Improve log output * measurement: improve log output * octphy: improve log output * octphy: initalize l1msg and only when needed * octphy: initalize nmsg only when needed * octphy: remove log output * Revert "sysmobts: normalize frame number in measurement indication" * osmo-bts-trx: fix missing frame number in MEAS IND * osmo-bts-litecell15: Fix missing frame number in MEAS IND * Revert "osmo-bts-sysmo: Include frame number in MEAS IND" * octphy: complete value strings (octphy_cid_vals) * octphy: do not send empty frames to phy * osmo-bts-sysmo: Include frame number in MEAS IND * measurement: fix measurment report * octphy: remap frame number in MEAS_IND * octphy: implement support for dynamic timeslots [ Ivan Klyuchnikov ] * osmo-trx-bts: Fix incorrect setting of RXGAIN and POWER parameters on second channel (TRX1) of osmo-trx * osmo-trx-bts: Fix osmo-bts-trx crash on startup during reading phy instance parameters from config file * osmo-trx-bts: Fix incorrect bts shutdown procedure in case of abis connection closure * osmo-trx-bts: Fix incorrect bts shutdown procedure in case of clock loss from osmo-trx [ Ivan Kluchnikov ] * oml: Fix incorrect usage of const variable abis_nm_att_tlvdef_ipa [ Pau Espin Pedrol ] * phy_link: Fix typo in state being printed * trx: Allow BTS and TRX to be on different IPs * trx: Save osmotrx base-port vty properties * sysmo/tch.c: Clean up use of empty buffer * litecell15/tch.c: Clean up use of empty buffer * Use L1P instead of L1C for TCH logging and allocation * Fix annoying trailing whitespace * sysmo, litecell15: Make sure all TCH events are triggered * sysmo: Remove non longer valid -p option from help * Allow passing low link quality buffers to upper layers * l1sap.c: Avoid sending RTP frame with empty payload * l1sap.c: fn_ms_adj: Add err logging and always return GSM_RTP_DURATION * Move dump_gsmtime to libosmocore as osmo_dump_gsmtime * Use osmo_dump_gsmtime to log fn across different layers * lc15bts-mgr.cfg: Set default vswr to a value inside valid range * litecell15: Register in vty limits for paX_pwr * lc15: Tweak led colors used in service file * lc-15, sysmo: l1_if: print name on PH-DATA.ind unknwon sapi * lc15bts-mgr.service: Prepare dirs and sysctls for the process * osmo-bts-trx: Enable osmotrx tx-attenuation oml by default * osmo-bts-trx: Relax validation to allow TRX data bursts without padding [ Sebastian Stumpf ] * VIRT-PHY: Added example configurations for openbsc and osmobts. * VIRT-PHY: Fixed timeslot in gsmtap-msg on downlink which was always 0. * VIRT-PHY: Added test option for fast hyperframe repeat. -- Max Fri, 25 Aug 2017 15:16:56 +0200 osmo-bts (0.5.0) unstable; urgency=medium * Initial release. -- Holger Hans Peter Freyther Fri, 01 Apr 2016 16:13:40 +0200