Age | Commit message (Collapse) | Author | Files | Lines |
|
We want to always call l1if_tch_rx and l1sap_up in order to avoid losing triggering
events on the upper layer.
With this change, the upper layer will increase correctly seq + ts for
RTP. It will then send an RTP packet with only the header and no payload, which is
not correct but at least we avoid drifting the RTP clock. Upcoming patch
in the series solves this issue.
This patch assumes that we are not lossing data events from the physical
layer and that we receive an event every 20ms, even if the MS is not
transmitting due to DTX.
Depends on libosmocore If4ae20c22b881e94585dad710f17b9e37f77bf82
Change-Id: If5df8940fab833eb4e3ed851880b66987d356031
|
|
This whitespace keeps being automatically fixed by editor, polluting my
patches.
Change-Id: If0ba1321ed326c1498e3f60b611bd962f2a9484a
|
|
L1C is for L1-Control primitives, while TCH channels are L1 Data
channels.
Change-Id: I07ea3a7326bfcb62271d58deb0743311f6d97c8b
|
|
Make code easier to read and avoid reading first byte of the buffer if size is 0.
Change-Id: Ib9ee967c0f42098b3a0569e9d84f23832eb4f2d5
|
|
Fix SID_FIRST_INH detection during speech and when SID_FIRST is interrupted by FACCH.
Fix SID_UPDATE_INH detection during silence and when SID_UPDATE is interrupted by FACCH.
Add a delay for SID_FIRST to appear at the right time after FACCH.
Fix extra byte sent in downlink for SID_FIRST and SID_UPDATE.
Change-Id: Ia811305e15541f2376005df736bd610e8b0d2f69
|
|
Max's note: made similar modification to osmo-bts-sysmo/tch.c
Change-Id: I76e62783b73803dfc0d32693a68020a9d89878b8
Related: OS#1801
|
|
* Unlike in AMR FR, in AMR HR incoming ONSET have to be treated
differently depending on whether we've recently sent SID UPDATE or
EMPTY frame. Split ST_SID_U FSM state into 2 states to accommodate for
that and make sure that additional states specific to AMR HR are not
used for AMR FR.
* Avoid sending E_VOICE and E_SID_U in corresponding states
as those do not initiate FSM state transitions anyway. This decrease
extra load from FSM signalling which otherwise would be triggered on
per-frame basis.
* Introduce separate signal for SID First P1 -> P2 transition to avoid
confusion with E_COMPL and E_SID_U initiated transitions from P1
state.
* Don't init DTX FSM for SDCCH channels.
Change-Id: I229ba39a38a223fada4881fc9aca35d3639371f8
Related: OS#1801
|
|
Add explicit state for recursion (sending the different payload data in
response to the RTS request for same FN) and corresponding
transition. Remove ST_FACCH_V as with new explicit recursion handling it
becomes unreacheable. This makes it easier to maintain
preemption (interruption of current procedure due to FACCH or
Inhibition). This also reduces the number of possible transitions out of
each state thus reducing graph's cyclomatic complexity.
Change-Id: If39b68083d23a4a35f468a5d75f54eb733ebfd14
|
|
Introduce dtx_dl_amr_enabled() function which checks that DTX is enabled
and FSM is allocated and use it for all corresponding checks.
Change-Id: Ifa68b641265ed14f242765c85e40da2d1021a541
|
|
* re-introduce ST_ONSET_F to guard from repetitive ONSET messages in case
multiple FACCH occur duriing DTX silence period.
* produce ONSET event after both SID FIRST and UPDATE in case of AMR FR.
* always dispatch E_SID_F (SID FIRST) signal if in talkspurt.
* allow E_SID_* right after ONSET (zero-length talkspurt).
* add missing E_ONSET signal description.
* fix FSM transitions for AMR HR *Inhibited and First P*.
* fix incorrect return from l1if_tch_encode() in ONSET FACCH with
incoming SID UPDATE
Change-Id: I0e9033c5f169da46aed9a0d1295faff489778dcf
Related: OS#1801
|
|
Handle ONSET cause by Voice and FACCH separately. In case of Voice we
have RTP payload which we have to cache and send later on in next
response to L1 RTS. FACCH have higher priority so it preempts both voice
and silence alike - hence we can send ONSET immediately but still have
to track previous state in order to get back to it gracefully.
This affects lc15 and sysmo hw as there's no FSM-based DTX
implementation for other models yet.
Note: this requires patch for OpenBSC which adds FACCH buffer to tch.dtx
struct.
Change-Id: Idba14dcd0cb12cd7aee86391fcc152c49fcd7052
Related: OS#1802
|
|
Use dedicated FSM to handle all DTX DL related events:
- add explicit checks if DTX DL is enabled (fixes regression for non-DTX
setup introduced in 654175f33bd412671e3ef8cdd65c0689d10f278c)
- fix handling of AMR CMI for SPEECH frames
- add FSM for DTX DL
- sync with corresponding changes in OpenBSC's
- handle FACCH-related DTX ONSET events
This affects both lc15 and sysmobts and requires corresponding change in
OpenBSC (Change-Id: Idac8609faf9b5ced818fde899ccfc6ed0c42e8fd).
Change-Id: I74a0b42cb34d525b8a70d264135e82994ca70d31
|
|
When ONSET event happens (either via Marker bit or due to unmarked
talkspurt) we should first send Onset event to L1 and than send voice
data in response to the same PH-RTS.ind.
Change-Id: I2a7b89430ca49eee4a350c5f980bd6bcbc386347
|
|
Move code from tch.c (lc15, sysmo) into generic function which:
- check if talkspurt is happening
- cache SID if necessary or invalidate cache
- fill in CMR & CMI prefix
This also fixes the problem when SID FIRST was cached without sending
just like SID UPDATE instead of being sent right away.
Change-Id: I6c7016a54749abadeef4fd4f5b6f750b256fb916
|
|
* consolidate AMR CMR and CMI handling in common/amr.c
* use it in save_last_sid()
* remove dead code
* properly compute RTP payload length for AMR
* use save_last_sid() for FR & HR as well
* invalidate cached SID if SPEECH frame is received
Fixes: OS #1800, #1801
Change-Id: I5a1c1ad0b0a295a50e67775a4db85f1d331755ed
|
|
Note: this also require changes to properly link against libosmocodec -
see 2bb65be159dfdabf664fec569b343320301701b0 in libosmocore.
Change-Id: I96594cf3aa1013d505bd20069d5bf261d9a2aefb
|
|
There's no SID stored in UL direction so there's nothing to remove.
Change-Id: I3f587a66406bc6a02b859e826f4903641fcc5a15
|
|
If Marker bit is set than it's a talkspurt which we have to explicitly
indicate to L1 by first sending ONSET message and than actual voice
data in a separate message.
This change affect sysmobts and LC15 hw.
Change-Id: I88c41568bcb0d82699f617adc4ad192603dd1bb6
Related: OS#1750
|
|
Some phone seems to not send SID_FIRST_P2 message which seems like a
different understanding of the DTX spec. L1 accommodates for that by
using P1 to supply data for SID. Hence we should use it to initiate DTX
and ignore P2 message in case of AMR HR.
Change-Id: Iaf993b89caa0ad49b97d1c745dcaf039f867f018
|
|
Previously receiving SID via RTP always caused it's transmission to L1
regardless of the time which might have resulted in excess traffic. Fix
this by only saving SID data and transmitting it later on as necessary
according to 3GPP TS 26.093 A.5.1.1.
Change-Id: Ifcdc5c60d0238b704a94f6778d4e00f2b087b090
Fixes: OS#1801
|
|
Previously SID retransmission was scheduled incorrectly based on GSM
frames instead of voice frames. Fix this by using GSM Fn only as elapsed
time estimation:
* move saved SID retransmission into generic function from lc15 and sysmo
specific code
* split retransmission time check into separate generic function
* compute estimation for elapsed time since last retransmission using
GSM Fn
Change-Id: Ib054b458a7345d9ba40dba53754ca59ab099c8e8
Fixes: OS#1799
|
|
Previously SID was saved explicitly by each BTS model (lc15, sysmo)
instead of relying on generic function. Fix it by using generic function
and propagating necessary parameters for it.
Change-Id: Ie545212cce5ed2b3ea3228597f18a473f5e1deb4
Fixes: OS#1800
|
|
Those functions are now part of libosmocore.
Change-Id: Iab3206e3b41caff23f656a727605032df9798953
|
|
Abstract code for checking/setting lchan's UL SID flag and RTP Marker
into generic function and use it for LC15 and sysmoBTS.
Change-Id: Ica5392e92bab29164711163e7b01adb174272883
Related: OS#1750
|
|
Related: OS#1750
Change-Id: Ic4342eaf7e32a0e9a5f2b16dd196a1f5f03152a9
|
|
Change-Id: Id744b67904011eb328b24c46a645b3eb53525c04
Fixes: OS#1562
|
|
Set Marker bit in RTP header to mark the beginning of talkspurt.
Change-Id: I3dd70ad8ff94356e3c3cc5458255f6c23534783e
Related: OS#1562
|
|
Store last SID received over RTP and repeat is if necessary (no new SID
or SPEECH frames) according to codec-specific scheduling rules.
Related: OS#1563
Copy-paster from I4d23846a27d3dbd2a6e75e481c1efcdb2a85f305 for LC15.
Change-Id: I29acea6e8bbf426330ce52554a48afb5d2ef1679
|
|
Previously frame number was not saved in case of PRIM_TCH rendering many
debug statements with g_time useless.
Copy-paste from ef30f50d5d6d5f863fc147d05ccdceb89284934e.
Change-Id: I952b39458d921622d5964cbdcc2f4e45ff9ea951
|
|
Use libosmocodec function to parse RTP with AMR payload in sysmoBTS and
LC15. This replaces "manual" parsing of AMR frame with function covered
by test suite and makes adding DTXd support easier.
Related: OS#1563
Change-Id: I1464f9a12e3f92926d03d5dd5d18e8f0f7206dd9
Reviewed-on: https://gerrit.osmocom.org/204
Tested-by: Jenkins Builder
Reviewed-by: Harald Welte <laforge@gnumonks.org>
|
|
This commit adds basic support for the Litecell 1.5. Multi-TRX is not
supported yet. Instead, multiple instances of the BTS can be launched
using command line parameter -n <HW_TRX_NR> to specify if TRX 1 or
2 must be used by the bts. Note that only TRX 1 opens a connection to
the PCU. Full support for GPRS on both TRX will come at the same time
than the multi-TRX support.
The BTS manager has been adapted to match the new hardware but otherwise
it has not been improved or changed compared to the one used on the
SuperFemto/Litecell (sysmobts).
|