| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
In order to support transmit power reduction by thermal management
as well as the variety of new internal / external PA configurations
of BTSs, we need a slightly more complex system.
Also, as at high power a single dB can be quite a big difference,
we are now doing all computations in milli-dB(m), i.e. 1/10000 bel.
Ramping is now used both for up and down ramping, as that is useful in
cases where you want to gracefully shut down a cell by shrinking its
radius, gradually handing over subscribers to neighboring cells.
Furthermore, this code is becoming part of the 'common' codebase, as it
is not really specific to how sysmobts is working.
The user can specify a single aggregate value for external system
gain/attenuation. Let's say you have 1dB loss of antenna cable, so you
can put that as 'user-gain -1' into the config, which means that a
'transmit power of 20dBm' will be compensatet for that and the TRX is
instructed to output 21dBm to compensate the cable loss. Similarly,
external PAs can be described by a positive user-gain.
One of the next steps will be to communicate those values and the
nominal power capability of the specific BTS to the BSC, so the BSC will
automatically show correct signal levels in the VTY and log files.
The code includes provisions for future extensions regarding
* an external and an internal PA with calibration tables
* a thermal attenuation setting to be controlled by the site manager
|
|
Limit the range from 0 to (_MAX_SYSINFO_TYPE - 1) instead of
0 to 31. This way we will never access the lchan->si.buf[] out
of bounds. This is only a theoretical issue though as the code
filling the lchan->si.buf for the SACCH will not have valid
>= _MAX_SYSINFO_TYPE. Add a small regression test to check we
still schedule all SIs.
Fixes: CID 1040765
|
|
We could have a dedicated configure/cflag for the header files
but for now search in the standard directories.
|
|
Add function for requesting the temperature information to the
microcontroller. I have added a function that we can extend
for requesting more information but in this case we only need to
know the temperature.
I have added to a microcontroller temperature handling function
in the manager for monitoring this information.
Signed-off-by: Alvaro Neira Ayuso <anayuso@sysmocom.de>
|
|
The first test checks the AGCH may queue length computation.
The second test fills the queue by calling bts_agch_enqueue() with a
mix of IMM.ASS and IMM.ASS.REJ. Then it drains the queue by calling
bts_ccch_copy_msg(). After each of both steps, statistics are printed
out.
Sponsored-by: On-Waves ehf
|
|
libosmoabis has a BTS-side implementation of the IPA protocol for years,
and osmo-bts should have used that all the time. Unfortunately it had
its own local hack, this patch is migrating to the libosmocore
implementation.
|
|
|
|
During development one switches from GSM900 to GSM1800 and GSM850 to
GSM1900. This commit attempts to make this switch more easy.
GSM1800 and GSM1900 have overlapping ARFCNs. This means that the
mapping from bands to arfcn is not injective. Because of that I
removed the code to deduce the band from the ARFCN. This was done
in commit 8c3d807b3fc785ffb18aeb97355150c92221e8a0. The auto-band
option allows to move between GSM900/GSM1800 and GSM850/GSM1900.
Add a simple testcase with these auto-band configurations.
|
|
This was found and debugged by Sylvain. The BTS will always support
A5/0 so we do not keep track of that, the first bit of the flags is
used for A5/1, second for A5/2... but for RSL there is an offset to
go from RSL to A5(x). Add a testcase and change the code.
|
|
* Comment out the osmo-bts-bb/Makefile as we have removed it from
the SUBDIRS and are not packaging the code right now
* Add missing include files for the build
|
|
|
|
Add autoconf support to set the path to the OpenBSC include directory
so that openbsc/gsm_data_shared.h can be found there.
|
|
Right now osmo-bts requires access to one OpenBSC header file and
this requires that openbsc and osmo-bts git are in the same directory.
Begin with making the location of the OpenBSC sourcecode configurable.
This approach will allow to build osmo-bts on our Jenkins installation
but now has the risk of more code including the openbsc/*.h header files.
|
|
Check that adding a paging command works, check that it is expired
after the first call to paging_gen_msg. The test will be extended
to test the scheduling and selection of the various paging messages.
|
|
|
|
|
|
|
|
This only implements creating, binding, connecting and free'ing RTP
sockets, not yet anything regarding receiving or transmitting codec
frames on them.
You will need the rtp branch of libosmocore for libosmotrau
|
|
|
|
|
|
This code re-works osmo-bts to add support for the upcoming sysmocom BTS.
It also tries to add some level of abstraction between the generic
part of a BTS (A-bis, RSL, OML, data structures, paging scheduling,
BCCH/AGCH scheduling, etc.) and the actual hardware-specific bits.
The hardware-specific bits are currently only implemented for the sysmocom
femtobts, but should be (re-)added for osmocom-bb, as well as a virtual
BTS for simulation purpose later.
The sysmocom bts specific parts require hardware-specific header files
which are (at least currently) not publicly distributed.
|
|
|
