diff options
Diffstat (limited to 'doc/manuals/chapters/control.adoc')
| -rw-r--r-- | doc/manuals/chapters/control.adoc | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/doc/manuals/chapters/control.adoc b/doc/manuals/chapters/control.adoc new file mode 100644 index 00000000..3b21669b --- /dev/null +++ b/doc/manuals/chapters/control.adoc @@ -0,0 +1,24 @@ +[[control]] +== Control interface + +The actual protocol is described in <<common-control-if>>, the variables +common to all programs using it are described in <<ctrl_common_vars>>. Here we +describe variables specific to OsmoBTS. The commands starting with prefix +"net.btsN." are specific to a certain BTS so N have to be replaced with BTS +number when issuing command. Similarly the +TRX-specific commands are additionally prefixed with TRX number e. g. +"net.bts1.trx2.thermal-attenuation". + + +.Variables available over control interface +[options="header",width="100%",cols="20%,5%,5%,50%,20%"] +|=== +|Name|Access|Trap|Value|Comment +|net.btsN.trxM.thermal-attenuation|RW|No|integer|See <<ther>> for details. +|=== + +[[ther]] +=== thermal-attenuation + +Allowed SET value for thermal attenuation is between 0 to 40 dB. Note: the value +is SET in dB units but GET will return value in mdB units used internally. |