| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This dates back to a time where osmo-bsc_nat was in the same repository,
which is a long time ago.
Change-Id: Id965295dfe04f8bd5ce831db70c86f67b8dc290b
|
|
Lots of times, the MS power class is unknown until after the first
channel has been activated, at which point the MS power class is
received in messages such as LU update or CM Service Requet.
Since the MS Power level is sent upon CHAN ACT, the only way to
communicate the change of maximum MS Power (based on MS power class)
after CHAN ACT is to send a MS Power Control msg. Let's do that.
Related: OS#4244
Change-Id: I3d6b75578e5cb9b2ad474a0ad01362d846ebe135
|
|
Fix neighbor config to match OsmoBSC manual: implement the plan for neighbor
configuration that was so far only described in the manual without actually
being in operation.
This first allows re-using ARFCN+BSIC pairs in and across BSS.
So far the handover_start() code always looked for handover target cells across
*all* local cells, even if they were not listed as neighbors to a source cell.
Imply all cells as neighbors only as long as there are no explicit neighbors
configured. As soon as the first 'neighbor' line appears in a 'bts' config,
only the listed neighbors are regarded as handover target cells. (The
'neighbor-list' commands are not related to this, only the relatively new
'neighbor (bts|lac|cgi|...)' commands affect actual handover procedures.)
TTCN3 tests TC_ho_neighbor_config_1 thru _7 play through the various aspects of
neighbor configuration: both the legacy implicit all-cells-are-neighbors as
well as allowing only explicit neighbors by config.
Related: OS#4056
Related: osmo-ttcn3-hacks Ia4ba0e75abd3d45a3422b2525e5f938cdc5a04cc
Change-Id: I29bca59ab232eddc74e0d4698efb9c9992443983
|
|
bsc_clear_request() is in fact used only within gsm_08_08.c, make it static to
that file.
Since the gscon FSM, "real" BSSMAP Clear are sent only by gscon_bssmap_clear().
bsc_clear_request() remains in use for legacy code paths in gsm_08_08.c:
- the bsc_filter, i.e. for IMSI filtering;
- in move_to_msc(), from handle_cc_setup(), a code path that is in fact not
entirely clear to me. It seems to be an old functionality to serve multiple
MSCs?
Both of which I personally haven't seen in use, are not tested and should
probably be completely removed.
For now contain legacy code in the static context.
Adjust comment.
Change-Id: Ic89d0afad42e4b11183a13d2dc6b7bbf0b822fd9
|
|
Move the T_defs API to libosmocore as osmo_tdefs: remove the local T_defs API
and use libosmocore's osmo_tdef* API instead.
The root reason is moving the mgw_endpoint_fsm to libosmo-mgcp-client to be
able to use it in osmo-msc for inter-MSC handover.
When adding osmo_tdef, the new concept of timer groups was added to the API. It
would make sense to apply group names here as well, but do not modify the VTY
configuration for timers. The future might bring separate groups (or not).
Depends: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5 (libosmocore)
Change-Id: I66674a5d8403d820038762888c846bae10ceac58
|
|
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
|
|
Change-Id: If212fcd042051b6fa53484254223614c5b93a9c6
|
|
"utils" suggests thin helpers to aid using a proper API, while this .c file
actually *is* the proper RR API. Rename from "utils" to "rr".
Change-Id: I0ffff63d57f03cb324df8e40e41caea5b55a2c85
|
|
In certain situations like handover or assignment, DTAP must not go out via RSL
directly but is cached to be submitted later. Make sure that all RSL DTAP
sending adheres to this:
gscon_submit_rsl_dtap() is the new "public" API to request an RSL DTAP to be
sent. Depending on the gscon's state, this ends up in the cache or is sent
directly. When caching, there is no way to tell whether sending will succeed or
not, so semantically it does not make sense to even return a result code. Just
return void. Change all "public" callers to gscon_submit_rsl_dtap().
Merge gsm0808_submit_dtap() and submit_dtap() guts to gsm0808_send_rsl_dtap(),
static in bsc_subscr_conn_fsm.c: directly send DTAP, assume a conn->lchan to be
present, or otherwise trigger a BSSMAP Clear Request.
The static submit_dtap() becomes a thin convenience wrapper.
Move ho_dtap_cache* functions to bsc_subscr_conn_fsm.c and rename to
gscon_dtap_cache_* -- they are not only for handover, also for assignment.
Function gsm0808_submit_dtap() m
Introduce function gscon_submit_rsl_dtap()
Change-Id: I6ffd7aa641c8905292c769400048c96aa0949585
|
|
Depends: Ia71ba742108b5ff020997bfb612ad5eb30d04fcd (libosmocore)
Change-Id: I0153d7069817fba9146ddc11214de2757d7d37bf
|
|
struct bsc_api was used to provide an abstract API for both osmo-bsc and
osmo-msc, between BSC and MSC. That's no longer needed, so get rid of it, to
prevent code turbulences it creates for no reason.
Change-Id: I3fd5888c63a0b4f95520a498320aa105a6d60579
|
|
Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to
allow linking from utils/* and ipaccess/* without pulling in unccessary
dependencies.
Some utilities use gsm_network and gsm_bts structs, which already include data
structures for fairly advanced uses. Move initialization that only osmo-bsc
needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so
that the leaner tools can use the old gsm_* versions without the need to link
everything (e.g. handover and lchan alloc code).
In some instances, there need to be stubs if to cut off linking "just before
the RSL level" and prevent dependencies from creeping in.
- abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is
osmo-bsc, the utils are merely concerned with OML, if at all.
- paging_flush_bts(): ip.access nanobts models call this when the RSL link is
dropped. Only osmo-bsc actually needs to do anything there.
- on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related
to OML, while this action to take on init would pull in RSL dependencies.
utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests
implement stubs inline where required.
From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/.
In order for this to work, the osmo-bsc subdir must be built before the other
source trees. (An alternative would be to include the .c files as sources, but
that would re-compile them in every source tree. Not a large burden really, but
unless linking .o files gives problems, let's have the quicker build.)
Minor obvious cleanups creep in with this patch, I will not bother to name them
individually now unless code review asks me to.
Rationale:
1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old
openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc
is distracting.
2) Recently, ridiculous linking requirements have made adding new functions
cumbersome, because libbsc has started depending on osmo-bsc/*.c
implementations: on gscon FSM and bssap functions. For example, neither
bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP
message composition. It makes no sense to link the entire osmo-bsc to it, nor
do we want to keep adding stubs to each linking realm.
Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
|
|
The TEST_SCAN_TO_MSC is completely unused, but still the code linked
bsc_scan_bts_msg() for the unused code path. This is unlikely to ever be
expanded. Remove TEST_SCAN_TO_MSC and reduce linking requirements.
(I am this close to dropping the test entirely to avoid continuous linking
annoyance, but ok, since nothing else tests timezones AFAIK, keeping it.)
Change-Id: I27521950432e412f919cde811c9473557d0ec25e
|
|
Fix various sanitizer complaints about memory leaks using a sanitizer build
with gcc (Debian 7.3.0-12) 7.3.0.
Also fix deprecation warnings on osmo_init_logging().
Depends: I216837780e9405fdaec8059c63d10699c695b360 (libosmocore)
Change-Id: I970c6f8a0e36a8b63e42349dbc92baff649e5cef
|
|
In the current implementation of osmo-bsc, the subscriber connection is
not handled (very) statefully. However, there is some state keeping in the
code that handles the mgcp connection, but there are still to much loose ends
which allow odd situations to happen, which then lead severe error situations
(see also closes tags at the end) This commit adds a number of improvements
to fix those problems.
- Use an osmo-fsm to control the gsm_subscriber_connection state and
make sure that certain operations can only take place at certain states
(e.g let connection oriented SCCP traffic only pass when an SCCP connection
actually exists.
Remove the old osmo_bsc_mgcp.c code. Use the recently developed MGCP client
FSM to handle the MGCP connections.
Also make sure that stuff that already works does not break. This in
particular refers to the internal handover capability and the respective
unit-tests.
See also OS#2823, OS#2768 and OS#2898
- Fix logic to permit assignment to a signalling channel. (OS#2762)
- Introduce T993210 to release lchan + subscr_conn if MSC fails to respond
The GSM specs don't have an explicit timer for this, so let's introdcue
a custom timer (hence starting with 99).
This timeout catches the following situation:
* we send a SCCP CR with COMPL_L3_INFO from the MS to the MSC,
* the MSC doesn't respond (e.g. SCCP routing failure, program down, ...)
The MS is supposed to timeout with T3210, 3220 or 3230. But the BSC
shouldn't trust the MS but have some timer on its own.
SCCP would have a timer T(conn est), but that one is specified to be
1-2min and hence rather long.
See also: OS#2775
- Terminate bsc_subscr_conn_fsm on SCCP N-DISC.ind from MSC
If the MSC is disconnecting the SCCP channel, we must terminate the FSM
which in turn will release all lchan's and other state.
This makes TC_chan_rel_hard_rlsd pass, see also OS#2731
As a side-effect, this fixes TC_chan_act_ack_est_ind_refused(),
where the MSC is answering with CREF to our CR/COMPL_L3.
- Release subscriber connection on RLL RELEASE IND of SAPI0 on main DCCH
The subscriber connection isn't really useful for anything after the
SAPI0 main signalling link has been released. We could try to
re-establish, but our best option is probably simply releasing the
subscriber_conn and anything related to it.
This will make TC_chan_rel_rll_rel_ind pass, see also OS#2730
This commit has been tested using the BSC_Tests TTCN3 testsuit and the
following tests were passed:
TC_chan_act_noreply
TC_chan_act_ack_noest
TC_chan_act_ack_est_ind_noreply
TC_chan_act_ack_est_ind_refused
TC_chan_act_nack
TC_chan_exhaustion
TC_ctrl
TC_chan_rel_conn_fail
TC_chan_rel_hard_clear
TC_chan_rel_hard_rlsd
TC_chan_rel_a_reset
TC_rll_est_ind_inact_lchan
TC_rll_est_ind_inval_sapi1
TC_rll_est_ind_inval_sapi3
TC_rll_est_ind_inval_sacch
TC_assignment_cic_only
TC_assignment_csd
TC_assignment_ctm
TC_assignment_fr_a5_0
TC_assignment_fr_a5_1_codec_missing
TC_assignment_fr_a5_1
TC_assignment_fr_a5_3
TC_assignment_fr_a5_4
TC_paging_imsi_nochan
TC_paging_tmsi_nochan
TC_paging_tmsi_any
TC_paging_tmsi_sdcch
TC_paging_tmsi_tch_f
TC_paging_tmsi_tch_hf
TC_paging_imsi_nochan_cgi
TC_paging_imsi_nochan_lac_ci
TC_paging_imsi_nochan_ci
TC_paging_imsi_nochan_lai
TC_paging_imsi_nochan_lac
TC_paging_imsi_nochan_all
TC_paging_imsi_nochan_plmn_lac_rnc
TC_paging_imsi_nochan_rnc
TC_paging_imsi_nochan_lac_rnc
TC_paging_imsi_nochan_lacs
TC_paging_imsi_nochan_lacs_empty
TC_paging_imsi_a_reset
TC_paging_counter
TC_rsl_drop_counter
TC_classmark
TC_unsol_ass_fail
TC_unsol_ass_compl
TC_unsol_ho_fail
TC_err_82_short_msg
TC_ho_int
Authors:
Harald Welte <laforge@gnumonks.org>
Philipp Maier <pmaier@sysmocom.de>
Neels Hofmeyr <neels@hofmeyr.de>
Closes: OS#2730
Closes: OS#2731
Closes: OS#2762
Closes: OS#2768
Closes: OS#2775
Closes: OS#2823
Closes: OS#2898
Closes: OS#2936
Change-Id: I68286d26e2014048b054f39ef29c35fef420cc97
|
|
All callers pass mcc=1, mnc=1, so just have it as default.
(Prepare for net->country_code etc to be replaced by net->plmn)
Change-Id: Ic16bc0bab3f2d4721e86a1a04f9d9f988d777df2
|
|
There was always a 1:1 correspondence between gsm_subscriber_connection
and osmo_bsc_sccp_con, so there's really no point in having two separate
dynamically allocated data structures with pointers back and forth and
another linked list around.
Let's merge osmo_bsc_sccp_con into gsm_subscriber_connection for
simplicity.
The resulting code might not be elegant in places, but I've tried to
do only the most simple changes in this patch, while further
simplifications can be done in later subsequent patches.
As a side-effect, this patch also fixes lchan clearing if the MSC
(or the local SCCP provider) hard-disconnects the SCCP connection.
Change-Id: Idd2b733477ee90d24dec369755a00f1c39c93f39
|
|
Change-Id: I07d4a48af3154ee4d904686f230a51b8b8a94ff9
|
|
Move gsm_data.c and handover_cfg.c to libbsc, where they belong.
This leaves libcommon utterly empty, drop it.
Change-Id: I6178061fa30c7e1a4c22c29d3c8f508b1033569f
|
|
Provide concise log categories for each main scope.
Move the complete log categories 1:1 to osmo_bsc_main.c.
In bsc_nat.c, omit obviously unused log categories.
In tests, omit almost all log categories, except for those explicitly tested as
the expected output.
Note: should any logging occur for a log category that is omitted by accident,
such will end up being logged as DLGLOBAL, so it will show up and we can fix
it, and it will not get lost silently.
Change-Id: Ib524e49ec211662e0dfde8161495a72aa8ad76cf
|
|
This member was merely a cache for conn->lchan->ts->trx->bts,
so let's avoid having to keep copies of the same data (which needs
to be kept up to date).
Change-Id: Id3bff8b18425ef5d45eb460ac9eb620023013ba0
|
|
The stow-enabled jenkins builds are currently failing like below:
make[3]: Entering directory '/build/src/libcommon'
CC bsc_version.o
CC common_vty.o
CC debug.o
CC gsm_data.o
In file included from debug.c:34:0:
../../include/osmocom/bsc/gsm_data.h:15:38: fatal error: osmocom/sigtran/sccp_sap.h: No such file or directory
#include <osmocom/sigtran/sccp_sap.h>
^
compilation terminated.
In file included from common_vty.c:27:0:
../../include/osmocom/bsc/gsm_data.h:15:38: fatal error: osmocom/sigtran/sccp_sap.h: No such file or directory
#include <osmocom/sigtran/sccp_sap.h>
^
compilation terminated.
In file included from gsm_data.c:37:0:
../../include/osmocom/bsc/gsm_data.h:15:38: fatal error: osmocom/sigtran/sccp_sap.h: No such file or directory
#include <osmocom/sigtran/sccp_sap.h>
^
compilation terminated.
Let's make sure the common gsm_data.h have all required CFLAGS to compile.
Change-Id: I30b75db6ffba227b05b5413b84b15f69e0c213f2
|
|
don't mock them, simply call the respective functions to get
a gsm_network and a gsm_bts with all its subordinate members.
Change-Id: I8bdf009d3c7e2473dd42da02762039a19430d6ce
|
|
libosmo-sccp is the old sccp-lite-focused SCCP implementation that we
used before libosmo-sigtran was created. The new osmo-bsc in this
repository is using libosmo-sigtran and shouldn't be using parts of
libosmo-sccp anymore.
We only keep it around in configure.ac and Makefile.am for osmo-bsc_nat,
which is not even built in this repository anymore (or 'again yet'?)
Change-Id: I8f274be7d196cd7a5b1ec9ada949130fb06e984d
|
|
There still is a lot of dead code that we inherited from the NITB
days, let's remove more of it.
libtrau will be re-introduced as part of osmo-mgw later.
Change-Id: I8e0af56a158f25a4f1384d667c03eb20e72df5b8
|
|
Change-Id: I39e7b882caa98334636d19ccd104fd83d07d5055
|
|
Rewire build and includes to libosmo-legacy-mgcp.
Drop osmo-bsc_mgcp and related python tests, now found in osmo-mgw.git.
libosmo-legacy-mgcp is installed from osmo-mgw, hence add the dependency to
jenkins.sh (so far using the pre_release branch).
Change-Id: Ic99d681759edce11564da62500c2aac5cf5fffe2
|
|
Disable large parts of the code that depend on BSC presence. The code sections
disabled by #if BEFORE_MSCSPLIT shall be modified or dropped in the course of
adding the A-interface.
Don't set msg->lchan nor msg->dst.
Don't use lchan in libmsc.
Decouple lac from bts.
Prepare entry/exit point for MSC -> BSC and MSC -> RNC communication:
Add msc_ifaces.[hc], a_iface.c, with a general msc_tx_dtap() to redirect to
different interfaces depending on the actual subscriber connection.
While iu_tx() is going to be functional fairly soon, the a_tx() is going to be
just a dummy for some time (see comment).
Add Iu specific fields in gsm_subscriber_connection: the UE connection pointer
and an indicator for the Integrity Protection status on Iu (to be fully
implemented in later commits).
Add lac member to gsm_subscriber_connection, to allow decoupling from
bts->location_area_code. The conn->lac will actually be set in iu.c in an
upcoming commit ("add iucs.[hc]").
move to libcommon-cs: gsm48_extract_mi(), gsm48_paging_extract_mi().
libmsc: duplicate gsm0808 / gsm48 functions (towards BSC).
In osmo-nitb, libmsc would directly call the functions on the BSC level, not
always via the bsc_api. When separating libmsc from libbsc, some functions are
missing from the linkage.
Hence duplicate these functions to libmsc, add an msc_ prefix for clarity, also
add a _tx to gsm0808_cipher_mode():
* add msc_gsm0808_tx_cipher_mode() (dummy/stub)
* add msc_gsm48_tx_mm_serv_ack()
* add msc_gsm48_tx_mm_serv_rej()
Call these from libmsc instead of
* gsm0808_cipher_mode()
* gsm48_tx_mm_serv_ack()
* gsm48_tx_mm_serv_rej()
Also add a comment related to msc_gsm0808_tx_cipher_mode() in two places.
Remove internal RTP streaming code; OsmoNITB supported that, but for OsmoMSC,
this will be done with an external MGCP gateway.
Remove LCHAN_MODIFY from internal MNCC state machine.
Temporarily disable all paging to be able to link libmsc without libbsc.
Skip the paging part of channel_test because the paging is now disabled.
Employ fake paging shims in order for msc_vlr_tests to still work.
msc_compl_l3(): publish in .h, tweak return value. Use new libmsc enum values
for return val, to avoid dependency on libbsc headers. Make callable from
other scopes: publish in osmo_msc.h and remove 'static' in osmo_msc.c
add gsm_encr to subscr_conn
move subscr_request to gsm_subscriber.h
subscr_request_channel() -> subscr_request_conn()
move to libmsc: osmo_stats_vty_add_cmds()
gsm_04_08: remove apply_codec_restrictions()
gsm0408_test: use NULL for root ctx
move to libbsc: gsm_bts_neighbor()
move to libbsc: lchan_next_meas_rep()
move vty config for t3212 to network level (periodic lu)
remove unneccessary linking from some tests
remove handle_abisip_signal()
abis_rsl.c: don't use libvlr from libbsc
gsm_subscriber_connection: put the LAC here, so that it is available without
accessing conn->bts. In bsc_api.c, place this lac in conn for the sake of
transition: Iu and A will use this new field to pass the LAC around, but in a
completely separate OsmoBSC this is not actually needed. It can be removed
again from osmo-bsc.git when the time has come.
Siemens MRPCI: completely drop sending the MRPCI messages for now, they shall
be added in osmo-bsc once the A-Interface code has settled. See OS#2389.
Related: OS#1845 OS#2257 OS#2389
Change-Id: Id3705236350d5f69e447046b0a764bbabc3d493c
|
|
This is the first step in creating this repository from the legacy openbsc.git.
Like all other Osmocom repositories, keep the autoconf and automake files in
the repository root. openbsc.git has been the sole exception, which ends now.
Change-Id: I9c6f2a448d9cb1cc088cf1cf6918b69d7e69b4e7
|
