| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Print IDs and IPs of recently rejected BTS devices. Example output:
OsmoBSC> show rejected-bts
Date Site ID BTS ID IP
------------------- ------- ------ ---------------
2018-10-25 09:36:28 1234 0 192.168.1.37
Related: OS#2841
Change-Id: Iba3bfe8fc9432b7ae8f819df8bd71b35b3ec507e
|
|
The vty already has a well working interface to configure the AMR
mode, threshold and hysteresis parameters. However there are no checks
yet to prevent against misconfiguration.
- Use gsm48_multirate_config() to perform a global check of the overall
configuration
- Add check AMR modes during input (order, duplicates)
Change-Id: I8b9f69b89a39bbf4800d9790f7abe43ce66aeb71
Related: OS#3529
|
|
The function gsm48_multirate_config() generates the multirate
configuration IE, that is sent via RSL to configure the active set of
AMR codecs inside the BTS. The function already works, but it does not
check the input data for consistancy. Lets add some consistancy check to
make sure that inconsistant parameters are rejected. Also allow the
output pointer to be NULL, so that the function can be used to perform
a dry run to be able to verify parameters.
- Check for invalid / inconsistant configuration parameters
- Perform a dry-run when lv pointer is set to NULL
Change-Id: I06beb7dd7236c81c3a91af4d09c31891f4b910a4
Related: OS#3529
|
|
This quickly allows knowing which IP a BTS is using in order to SSH
into it. Example output:
OsmoBSC> show trx
...
Baseband Transceiver NM State: Oper 'Enabled', Admin 'Unlocked', Avail 'OK'
ip.access stream ID: 0x00 (r=192.168.1.178:34090<->l=192.168.1.37:3003)
...
OsmoBSC> show bts
...
Paging: 0 pending requests, 50 free slots
OML Link: (r=192.168.1.178:57692<->l=192.168.1.37:3002)
OML Link state: connected 0 days 0 hours 0 min. 17 sec.
...
Related: OS#3145
Change-Id: I37f020fcdb68cafcdbdb621808483d1dd996354f
|
|
Change-Id: I65d3e6c6dc252fd60d2dd6b6687ceef4d75034ed
|
|
Remove unused gsm_subscriber_connection.user_plane.chan_mode.
There is only one VTY command that displays it along other
parameters, but it is used no where else. Lets remove it.
It was forgotten to be removed in:
commit 31f525e7560ad13e32cfc5e0b5f1862c0efcb991
Date Mon May 14 18:14:15 2018 +0200
"large refactoring: use FSMs for lchans; add inter-BSC HO"
change-id I82e3f918295daa83274a4cf803f046979f284366
Change-Id: I10049c14ea206a4daafbdad01634d57c72a79d7c
|
|
Change-Id: I83d6b0b3eafd83e2c0fbdec81d9677ff0118db92
|
|
The 'handover any' VTY command is only useful for testing. It is even more
useful if it doesn't always pick the first used lchan but produces more random
handovers.
The algorithm takes a random number as input, iterates over used lchans once,
and if the random number is larger, takes modulo of the nr of used lchans
counted. A second iteration will then produce a match.
Instead of figuring out the lchan type logic in bsc_vty.c, just use
lchan_select_by_type();
Change-Id: I50b70e02d665b967e401db65581e110bc83101e7
|
|
Add FSMs:
- timeslot_fsm: handle dynamic timeslots and OML+RSL availability.
- lchan_fsm: handle an individual lchan activation, RTP stream and release,
signal the appropriate calling FSMs on success, failure, release.
- mgw_endpoint_fsm: handle one entire endpoint with several CI.
- assignment_fsm: BSSMAP Assignment Request.
- handover_fsm: all of intra, inter-MO and inter-MT handover.
Above FSMs absorb large parts of the gscon FSM. The gscon FSM was surpassing
the maximum amount events (32), and it is more logical to treat assignment,
handover and MGW procedures in separate FSMs.
- Add logging macros for each FSM type:
- LOG_TS()
- LOG_LCHAN()
- LOG_MGWEP(), LOG_CI()
- LOG_ASSIGNMENT()
- LOG_HO()
These log with the osmo_fsm_inst where present.
New style decision: logging without a final newline char is awkward,
especially for gsmtap logging and when other logs interleave LOGPC() calls;
we have various cases where the final \n goes missing, and also this invokes
the log category checking N times instead of once.
So I decided to make these macros *always* append a newline, but only if
there is no final newline yet. I hope that the compiler optimizes the
strlen() of the constant format strings away. Thus I can log with or without
typing "\n" and always get an \n termination anyway.
General:
- replace osmo_timers, state enums and program-wide osmo_signal_dispatch()
with dedicated FSM timeouts, states and events.
- introduce a common way to handle Tnnn timers: gsm_timers.h/.c: struct T_def.
These can be used (with some macro magic) to define a state's timeout once,
and not make mistakes for each osmo_fsm_inst_state_chg().
Details:
bsc_subscr_conn_fsm.c:
- move most states of this FSM to lchan_fsm, assignment_fsm, handover_fsm and
mgw_endpoint_fsm.
- There is exactly one state for an ongoing Assignment, with all details
handled in conn->assignment.fi. The state relies on the assignment_fsm's
timeout.
- There is one state for an ongoing Handover; except for an incoming Handover
from a remote BSS, the gscon remains in ST_INIT until the new lchan and conn
are both established.
- move bssmap_add_lcls_status() to osmo_bsc_lcls.c
abis_rsl.c:
- move all dynamic timeslot logic away into timeslot_fsm. Only keep plain send/receive functions in
abis_rsl.c
- reduce some rsl functions to merely send a message, rename to "_tx_".
- rsl_ipacc_mdcx(): add '_tx_' in the name; move parts that change the lchan state out into the
lchan_fsm, the lchan->abis_ip.* are now set there prior to invoking this function.
- move all timers and error/release handling away into various FSMs.
- tweak ipa_smod_s_for_lchan() and ipa_rtp_pt_for_lchan() to not require an
lchan passed, but just mode,type that they require. Rename to
ipacc_speech_mode*() and ipacc_payload_type().
- add rsl_forward_layer3_info, used for inter-BSC HO MO, to just send the RR
message received during BSSMAP Handover Command.
- move various logging to LOG_LCHAN() in order to log with the lchan FSM instance.
One drawback is that the lchan FSM is limited to one logging category, i.e. this moves some logging
from DRR to DRSL. It might actually make sense to combine those categories.
- lose LOGP...LOGPC logging cascades: they are bad for gsmtap logging and for performance.
- handle_classmark_chg(): change logging, move cm2 len check out of the cm3 condition (I hope that's
correct).
- gsm48_send_ho_cmd(): split off gsm48_make_ho_cmd() which doesn't send right away, so that during
inter-bsc HO we can make an RR Handover Command to send via the MSC to the remote BSS.
assignment_fsm.c:
- the Chan Mode Modify in case of re-using the same lchan is not implemented
yet, because this was also missing in the previous implementation (OS#3357).
osmo_bsc_api.c:
- simplify bsc_mr_config() and move to lchan_fsm.c, the only caller; rename to
lchan_mr_config(). (bsc_mr_config() used to copy the values to mr_bts_lv
twice, once by member assignment and then again with a memcpy.)
- During handover, we used to copy the MR config from the old lchan. Since we
may handover between FR and HR, rather set the MR Config anew every time, so
that FR rates are always available on FR lchans, and never on HR lchans.
Depends: I03ee7ce840ecfa0b6a33358e7385528aabd4873f (libosmocore),
I1f2918418c38918c5ac70acaa51a47adfca12b5e (libosmocore)
Change-Id: I82e3f918295daa83274a4cf803f046979f284366
|
|
Change-Id: If212fcd042051b6fa53484254223614c5b93a9c6
|
|
"utils" suggests thin helpers to aid using a proper API, while this .c file
actually *is* the proper RR API. Rename from "utils" to "rr".
Change-Id: I0ffff63d57f03cb324df8e40e41caea5b55a2c85
|
|
Depends: Ia71ba742108b5ff020997bfb612ad5eb30d04fcd (libosmocore)
Change-Id: I0153d7069817fba9146ddc11214de2757d7d37bf
|
|
If an invalid phys_chan_config is specified in osmo-bsc.cfg, raise
a parsing error at program startup.
If an invalid phys_chan_config is specified in in the VTY while
the program is running, show a warning to inform the user that
the configuration change was not applied.
Change-Id: I97baa359464a0e94de2497bc9214b99ed2a24041
Related: OS#1876
|
|
Change-Id: I112c0db17d355d57eb08bc67121ccf49fbf53943
|
|
Will be used in upcoming inter-BSC handover.
Change-Id: If9ecccc793426d214019f299b19d6ffa5a186546
|
|
Move all of libbsc/ into osmo-bsc/, and separate/move some implementations to
allow linking from utils/* and ipaccess/* without pulling in unccessary
dependencies.
Some utilities use gsm_network and gsm_bts structs, which already include data
structures for fairly advanced uses. Move initialization that only osmo-bsc
needs into new bsc_network_init() and bsc_bts_alloc_register() functions, so
that the leaner tools can use the old gsm_* versions without the need to link
everything (e.g. handover and lchan alloc code).
In some instances, there need to be stubs if to cut off linking "just before
the RSL level" and prevent dependencies from creeping in.
- abis_rsl_rcvmsg(): the only program currently interpreting RSL messages is
osmo-bsc, the utils are merely concerned with OML, if at all.
- paging_flush_bts(): ip.access nanobts models call this when the RSL link is
dropped. Only osmo-bsc actually needs to do anything there.
- on_gsm_ts_init(): the mechanism to trigger timeslot initialization is related
to OML, while this action to take on init would pull in RSL dependencies.
utils/ and ipaccess/ each have a stubs.c file to implement these stubs. Tests
implement stubs inline where required.
From src/utils/, src/ipaccess/ and tests/*/, link in .o files from osmo-bsc/.
In order for this to work, the osmo-bsc subdir must be built before the other
source trees. (An alternative would be to include the .c files as sources, but
that would re-compile them in every source tree. Not a large burden really, but
unless linking .o files gives problems, let's have the quicker build.)
Minor obvious cleanups creep in with this patch, I will not bother to name them
individually now unless code review asks me to.
Rationale:
1) libbsc has been separate to use it for osmo-nitb and osmo-bsc in the old
openbsc.git. This is no longer required, and spreading over libbsc and osmo-bsc
is distracting.
2) Recently, ridiculous linking requirements have made adding new functions
cumbersome, because libbsc has started depending on osmo-bsc/*.c
implementations: on gscon FSM and bssap functions. For example, neither
bs11_config nor ipaccess-config nor bts_test need handover_cfg or BSSMAP
message composition. It makes no sense to link the entire osmo-bsc to it, nor
do we want to keep adding stubs to each linking realm.
Change-Id: I36a586726f5818121abe54d25654819fc451d3bf
|
