aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-04-08abis: log known ACKs and unknown messagesMax1-1/+18
Log expected ACK messages and unhandled messages to aid in troubleshooting. Change-Id: Id3afaaa76e24f63076ae0e6fd2322e4a7fa29b45 Related: OS#1614
2017-04-05python: fix Null loggerMax1-3/+3
Change-Id: Ie120273eabbc670e9f19ba365508688a810a2773 Related: SYS#3028
2017-04-03VTY: add the dyn_ts_allow_tch_f optionVadim Yanitskiy4-14/+29
This option allows to enable or disable TCH/F allocation on the TCH/F_TCH/H_PDCH timeslots. Until now, source code modification was required to enable this feature. Related: OS#1778 Change-Id: Id18cab25844dc854a66b4e2713e90c3f43afa712
2017-03-31jenkins.sh: Iu: use libosmo-sccp,-netif masterNeels Hofmeyr1-7/+2
The iu specific branches of libosmo-sccp and libosmo-netif have recently been merged to master. Change-Id: I9465d7b956c3bd65d6e8a387e6710235672352e8
2017-03-31LU counters: count completion and failure, not messages sentNeels Hofmeyr3-20/+38
From a human admin viewpoint it doesn't make sense to count the messages sent: When we use TMSIs, we first send a LU Accept with a new TMSI, and then expect the MS to respond with a TMSI Realloc Complete message. When that fails to come through, the LU actually ends in failure, even though a LU Accept was sent. If a conn breaks/vanishes during LU, we cancel the LU without sending any reply at all, so the failed LU would not be counted. Instead, count Location Updating results, i.e. completion and failures. (With the new VLR developments, LU counters need to be triggered in completely different places, and this patch prepares for that by providing sensible counters.) Change-Id: I03f14c6a2f7ec5e1d3ba401e32082476fc7b0cc6
2017-03-23Handle PCU version received via OML alertMax1-30/+90
Explicitly check for and log PCU version received from BTS via OML alert message. Change-Id: I3c88663d4e2887a4038b4c3f1387128295b8934e Related: OS#1614
2017-03-23Add simple CTRL2SOAP proxyMax1-0/+188
Add python client which converts TRAP messages into SOAP requests and perform corresponding actions. It can be used as follows ./soap.py -d -w http://example.com/soapservice/htdocs/wsdl/test.wsdl See ./soap.py -h for additional options. Change-Id: I82844ec7a302bac30d6daee9ebca2188fd48ca46 Related: SYS#3028
2017-03-23libbsc: add rsl_ericsson_imm_assign_cmd() which reply with a confirmation ↵Alexander Couzens2-1/+27
message ericsson can handle a reference at the end of a imm assign command which is used in the confirm response. The confirm response is only sent if the trailer is present. Change-Id: I88560291b5a3a3d7a0bac4d3c089b45f1f6b297f
2017-03-23RBS2000 RSL: Support for sending RSL PAGING CMD for GPRSHarald Welte3-3/+9
Change-Id: I66541f9b20e7fd67fbec329283fc3c821c970a56
2017-03-23RBS2000: Add the P-GSL Timer IE to RSL CHAN ACT for PDCHHarald Welte1-0/+7
This seems to be mandatory when an Ericsson RBS2000 uses a SuperChannel as back-haul. Change-Id: I793e7d62df1ca9f9c38d39e22d3868064d446c8d
2017-03-23abis_om2k: protect MO FSMs by NULL checkAlexander Couzens1-1/+17
Also set MO FSMs to NULL after freeing them. Change-Id: I30df0b9ab8bc47ba9756c8388e977deed0e40200
2017-03-23OM2000: Send ALTCRQ for SuperChannel after receiving IS Enable Req AckHarald Welte3-0/+32
When the BTS is configured to use a SuperChannel and it is using a unix domain socket based transport towards the L2TP daemon, then we must instruct the L2TP daemon to instruct the SIU to change the Abis Lower Transport Mode using the ALTCRQ / ALTCRP L2TP signalling. Change-Id: I672bfaa09c42fbeb0c8459f24b2222b952de954b
2017-03-21twisted_ipa.py: make debug logging more robustMax1-23/+32
Do not print anything to stdout directly - use proper logger object instead: either the one supplied by IPAFactory user or default to NO-OP NullHandler logger. Change-Id: Ic3417095a6e8848f0acabb46a9e64c0197b736e2 Related: SYS#3028
2017-03-21twisted_ipa.py: bump version properlyMax1-1/+3
Adjust version string to comply with PEP8 and PEP386. Change-Id: I44c8521f12e6432038998bfb1ac1bb37a1137787 Related: SYS#3028
2017-03-20python tests: allow running from separate build dirNeels Hofmeyr3-4/+9
The VTY tests assume that $top_builddir == $top_srcdir. Use the script's location from sys.path[0] to find the correct locations of example configs even when building in another directory. Change-Id: I2731f361e3b72d0980968e6cf83594ea450db7c2
2017-03-20bsc_/gprs_subscriber: fix: use osmo_strlcpy() to safely copy IMSINeels Hofmeyr2-2/+2
Fixes: coverity scan CID 163918 Change-Id: I4b2760b006a0707928530b4390c6997b79b02981
2017-03-16jenkins: add value_string termination checkNeels Hofmeyr1-0/+2
Depends: libosmocore change-id I2bc93ab4781487e7685cfb63091a489cd126b1a8 Change-Id: I4183415cd1ead9d46ae3a556e94243325ef5a844
2017-03-16Don't drop OML links for Get Attributes NACKMax1-10/+10
Previously any OML NACK message will result in BSC dropping OML link to BTS which makes it impossible to use optional OML messages which might be unsupported by BTS. Fix this for 3GPP TS 52.021 §8.11.1 Get Attributes message. Also, log human-readable NACK name to see what exactly causing OML link drop. Change-Id: Ib8af2872c27abb793172ec59bdc145b8d54f83da Related: OS#1614
2017-03-15oap tests: fix after SQN scheme changes from libosmocoreNeels Hofmeyr1-1/+1
In change-id Iadf43f21e0605e9e85f7e8026c40985f7ceff1a3, libosmocore changes from incrementing SQN after tuple generation to incrementing SQN before tuple generation. Thus we now need to pass desired_sqn - 1 to get the same tuples. Change-Id: Ifeda71e713bb60dcd31ac651f461b714cfa39b5c Related: OS#1968 OS#1969
2017-03-15OM2000: Change the order of MO initializationHarald Welte1-22/+24
So far: CF-IS-CON-TF Now: CF-TF-CON-IS Change-Id: I8efd9bafdcf9504d2e5fc85c44c708fa53f4dff8
2017-03-15gprs: fix T3186 encoding in Sysinfo 13Philipp Maier1-1/+7
The timer T3186, which is described in 3GPP TS 44.060, is using 3 bits of the si13 mac block. This requires special encoding. In the case of T3186, the value is encoded by the formula: bits = t/500-1. Our implementation uses the formula bits=t/500, which is incorrect. Change-Id: Ifd340c536cff2d1c4b1b3677a358ea95438801eb
2017-03-15examples: remove logging level * everythingMax2-7/+7
Option "logging level ... everything" is broken for quite some time and might be deprecated in future. Replace it with "logging level ... debug" in config examples. Change-Id: I828ef7671b4fb38717526a18ff8e9a5428cd511e Related: OS#71
2017-03-15cosmetic: Add commandline option to display versionPhilipp Maier1-1/+6
The -V option to display the Version and the copyright info is missing. Change-Id: I0c848fd42c13f473807caf3478d32c6ce5e43e31
2017-03-15libbsc: add chreq type for CHREQ_T_PDCH_ONE_PHASE & CHREQ_T_PDCH_TWO_PHASEAlexander Couzens3-3/+16
When using a BSC located PCU the BSC must understand PDCH requests. Change-Id: Ie7f4ed000cf1b40d269873cf0ddf5ff9f5bbc18a
2017-03-14cosmetic: add copyright header to bsc_control.pyPhilipp Maier1-0/+21
bsc_control.py lacks a copyright header. This commit adds the copyright header from ipa.py to bsc_control.py. Change-Id: Ie70bf686ee9bb157198e02bf8d946abf56adc82a
2017-03-14gprs_sgsn.c: initialize ptmsi with 0xdeadbeefAlexander Couzens1-1/+1
Fix uninitialized memory access warning. "Conditional jump or move depends on uninitialised value" Found by valgrind. Change-Id: Ibc2d585c5db899e6af20104211e32faf3822633a
2017-03-14python tests: vty and smpp: speed up >10 timesNeels Hofmeyr2-2/+0
osmo-python-tests now includes code that retries connecting the VTY socket and needs no external sleep()ing. This flies through most tests without any sleep() at all. See osmo-python-tests.git change-id Icc337f52a93d5fe31fc4ff235ccaf4e0fe75fa39 Change-Id: I42161d9716fe5bb0ef1c56e4bfb770bb99bbca7a
2017-03-13unixsocket: start sabm for UNIXSOCKETAlexander Couzens1-2/+4
openbsc only starts sabm messages for a subset of line drivers. Add unixsocket to those subset. Change-Id: If98c037119142cc33b46ab5c1bf02d4cda81c81e
2017-03-13OM2000: Add FIXME comments for missing resolving of RX/TX MO!Harald Welte1-0/+2
Change-Id: I45708df724c5fc3316eca6bd2ac2c0738b19a45b
2017-03-08add struct bsc_subscr, separating libbsc from gsm_subscriberNeels Hofmeyr30-115/+615
In a future commit, gsm_subscriber will be replaced by vlr_subscr, and it will not make sense to use vlr_subscr in libbsc. Thus we need a dedicated BSC subscriber: struct bsc_subscr. Add rf_policy arg to bsc_grace_paging_request() because the bsc_subscr will no longer have a backpointer to gsm_network (used to be via subscr->group). Create a separate logging filter for the new BSC subscriber. The implementation of adjusting the filter context is added in libbsc to not introduce bsc_subscr_get/_put() dependencies to libcommon. During Paging Response, fetch a bsc_subscr from the mobile identity, like we do for the gsm_subscriber. It looks like a duplication now, but will make sense for the VLR as well as for future MSC split patches. Naming: it was requested to not name the new struct bsc_sub, because 'sub' is too ambiguous. At the same time it would be fine to have 'bsc_sub_' as function prefix. Instead of struct bsc_subscriber and bsc_sub_ prefix, I decided to match both up as struct bsc_subscr and bsc_subscr_ function prefix. It's fast to type, relatively short, unambiguous, and the naming is consistent. Add bsc_subscr unit test. Related: OS#1592, OS#1594 Change-Id: Ia61cc00e8bb186b976939a4fc8f7cf9ce6aa3d8e
2017-03-07Add MS time. offset to gsm_lchanMax1-0/+6
Add MS TIMING OFFSET (3GPP TS 48.058 § 8.4.8) and P offset (3GPP TS 45.010 § 1.2) which can be used to compute MS TO from known TA. This will be used by osmo-bts (see I4dfe5c48834a083e757d5de3236a02e15a238b28) to provide MS TO as part of RSL MEASUREMENT RESULT. Change-Id: I8bda57c8d6c15bbb803eca708931556dae118a00 Related: OS#1574
2017-03-05vty tests: close msc socket after nat_msc_testNeels Hofmeyr1-23/+27
Change-Id: Ib64cf8690627803e1b4a8497ea63f1e766960478
2017-03-05sgsn: fix problem with leading-zero-IMSIsPhilipp Maier1-2/+11
When the IMSI ACL is maintained via the VTY, users may enter IMSIs without leading zeros. Especially in test environments, where MCC=001 and MNC=01 is common, it is likely that someone enters the corresponding IMSI (001010000000001) without the two zeros at the beginning. This patch fixes the problem by sanitizing the IMSI, eventually missing zeros in the beginning will be automatically added. Change-Id: I56ba0da61978bbdce71d0e320166c52b20b42517
2017-03-02vty tests: allow picking specific tests to run by nameNeels Hofmeyr1-0/+5
Depends: osmo-python-tests change-id I92f90c334169f31920c63dd5c5ac8dac215065e6 Change-Id: I849455e0423e1a63d6890aef7f9c6075ad53a920
2017-03-02Fix potential segfault in sgsn_libgtp.cMax1-3/+5
* print pdp->address instead of mm->imsi if mm is NULL * print mm->imsi in debug log (move it below NULL check) Change-Id: I4fbf5a54019a46612fbc528d61120182738f9205
2017-03-02subscriber conn: add indicator for originating RANNeels Hofmeyr3-1/+10
Add via_ran to gsm_subscriber_connection to indicate whether a conn is coming in via 2G/GERAN/A-Interface or 3G/UTRAN/Iu-Interface. Prepares for Iu, but also for libvlr to decide between GSM or UMTS Auth. Until actual Iu support is merged to master, this indicator will aid VLR unit testing. At some point we may also add RAN_GERAN_IU; it's not on the agenda yet, but to clearly distinguish the names if we want to add it, explicitly name the ones we have RAN_GERAN_A and RAN_UTRAN_IU. Change-Id: I93b870522f725170e4265a5543f6b680383d7465
2017-03-02fix: gprs_gmm, gprs_llc_vty: two unterminated value_string arraysNeels Hofmeyr2-0/+2
Change-Id: Icc4163ac4f962fe88bbebeb3310a557ba0834e84
2017-03-01meas_json: fix NEIGH: missing array bracesKeith1-1/+2
Make NEIGH an array of Javascript objects, otherwise the JSON is not parseable when neighbours exist Change-Id: I42029f40bf357adbb2f3c71cdcbafbc21090e348
2017-02-28libmsc/update_db_revision_3(): free memleaking db resultAlexander Couzens1-0/+2
Found by ASAN Change-Id: I2680c60e26b9876b428d4b75323f884f9ecd95b3
2017-02-28silent_call: remove unfinished fuzzer interfacePhilipp Maier3-0/+9
Remove the fuzzer interface that was partially implemented in gsm_04_08.c and silent_call.c is causing problems when an SMS is sent during an active silent call. The reason for this is that gsm0408_dispatch() in gsm_04_08.c would decide to rout all uplink traffic to silent_call_rx() in silent_call.c. silent_call_rx() is a stub function that discards the data. This patch removes the fuzzer interface code by placing ifdefs around it, so that it can be re-activated by experimentators. Change-Id: Id500197d58663b3f4b1756136343670388b0a4bc
2017-02-28ctrl_test_runner: speed up more than 10 fold by sleeping lessNeels Hofmeyr1-3/+13
Similar to a recent patch in osmo-python-tests for VTY based tests, but this is for the Ctrl tests. The TestCtrlBase tests gave a constant sleep(2) grace period for the process to startup. This causes tests to take minutes for no reason at all. Add code to TestCtrlBase to try and connect right away, retrying up to three seconds in .1 second intervals. This flies through most tests without any sleep() at all. Change-Id: I06569767153838bd9cd3edac001df5f6c567874c
2017-02-28vty test: nat_msc_test: setsockopt REUSE to avoid TIME_WAIT problemsNeels Hofmeyr1-0/+1
When running the testBSCreload test in close succession, I get a "Connection refused" error because the socket is still in TIME_WAIT state. Passing the SO_REUSEADDR flag allows reusing the addr despite a TIME_WAIT socket. Change-Id: I941851b062999ab4b962430f7b27c19935993e0a
2017-02-27XID: resend xid with pdp-ctx-ack messagesPhilipp Maier1-1/+15
If a pdp context is created a xid request is sent right after the pdp-context-ack message. The sending of the pdp-context-ack and the xid message is triggered from the GGSN via the GTP interface. When the pdp-context-ack message is not received by the MS, it will send the pdp-context-request again. A lost pdp-context-ack is resent by the SGSN directly so that the mechanism described above does not work for pdp-context-ack resents. This commit adds code to trigger the sending of xid messages also for resent pdp-context-ack messages. Change-Id: Ice66790803154310a61a70a54be76cec539c97a7
2017-02-27SGSN VTY: make missing GSUP server address+port fatalNeels Hofmeyr2-12/+10
On 'auth-policy remote', the SGSN requires GSUP server address and port. If it was missing, the SGSN would print a VTY warning and run anyway. Make this error more fatal: print an error (flattened a bit) to stderr and abort the program. Move validation of the GSUP server data presence out of the VTY command itself and into the config reading function. This way the GSUP server config can be given anywhere, including below the auth-policy config (was required above). Don't care about setting the auth-policy to remote with a telnet VTY, because in that case the GSUP client won't be started anyway. Change-Id: I4d8db910c32abd8579d3c9b9f0b2cb3a9a6dfe4c
2017-02-27SGSN: Integrate support for UMTS AKANeels Hofmeyr5-30/+205
The general infrastructure for UMTS AKA is already in place: * GSUP with capability to send us auth_vectors that contain either triplets or quintuples * mm_context that holds such auth_vectors Add: * capability to send UMTS AUTN in GMM AUTH REQ * parse extended UMTS RES * on auth response, validate expected AKA with vector and received res/sres * add Auth Failure message to receive resync AUTS token and * send to HLR * clear out-of-sync auth tuple * enter new state for when we're waiting for HLR to resync and send new tuples so that the next Auth Request will be handled Original first half of this patch by: Harald Welte <laforge@gnumonks.org> Full UMTS AKA procedure including AUTS resync tested to work against OsmoHLR with R99 USIM and Milenage algorithm. The sgsn_test.c needs adjustment because we're checking the vector's auth_types now. Depends: libosmocore change-ids I277fb3d407396dffa5c07a9c5454d87a415d393f If943731a78089f0aac3d55245de80596d01314a4 Related: OS#1956 Change-Id: Ie6a0cefba5e4e7f02cc2eaf6ec006ac07d5c1816
2017-02-25smpp_test_runner.py: fix socket leakNeels Hofmeyr1-0/+2
Each running test would open up another socket without ever closing unused ones. Close the sockets after each test is done. Change-Id: I0a42caab3bb8c9c9d04b033e4de9efe0ca8fd2af
2017-02-25python tests: remove process 'Launch' message, now at osmoutilNeels Hofmeyr3-3/+0
Change-Id: Id8eb70ddfdc1d0d9f90aa5343a4ea522042c34ee
2017-02-25vty_rest_runner.py: remove debug monitoring for TCP socketsNeels Hofmeyr1-22/+0
Change-Id: I7361bb0ce5302d00ccb18dc04eeb75ee1f6844a8
2017-02-25utils: 'meas_json' utility to convert measurement feed into a JSON feed.Alexander Chemeris2-0/+206
Change-Id: I56631969384da245eed8ffc14845c76a5d4de8d4
2017-02-25add struct gprs_subscr, separating gprs from gsm_subscriberNeels Hofmeyr13-151/+269
Prepare for replacing gsm_subscriber with vlr_subscriber. vlr_subscriber will not make sense to be used in gprs, so have a dedicated GPRS subscriber struct. (Could change if the gprs code were to use libvlr; is currently independent). Related: OS#1592 Change-Id: Ia8b391ee009c8545763cba04505be3947835120e
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-16 01:53:36 +0000