doc/examples: tweak osmo-bsc.cfg, add osmo-bsc_custom-sccp.cfg

Now osmo-bsc.cfg's SCCP addresses work by internal defaults, while
osmo-bsc_custom-sccp.cfg shows how to use custom STP IP address and SCCP point
codes.

Change-Id: Icb41d5adc24b2ee5613be691a201df8f3566e5dd

2 files changed, 127 insertions, 28 deletions

diff --git a/doc/examples/osmo-bsc/osmo-bsc.cfg b/doc/examples/osmo-bsc/osmo-bsc.cfg
index 7c10e9dea..efa27ec96 100644
--- a/doc/examples/osmo-bsc/osmo-bsc.cfg
+++ b/doc/examples/osmo-bsc/osmo-bsc.cfg
@@ -1,11 +1,5 @@
-!
-! OsmoBSC (0.9.14+gitr1+3d331c0062bb0c9694dbd4d1eab7adc58138c3ae) configuration saved from vty
-!!
-password foo
-!
-!
-line vty
- no login
+! osmo-bsc default configuration
+! (assumes STP to run on 127.0.0.1 and uses default point codes)
 !
 e1_input
  e1_line 0 driver ipa
@@ -15,12 +9,14 @@ network
  short name OsmoBSC
  long name OsmoBSC
  auth policy closed
+ authorized-regexp .*
  location updating reject cause 13
  encryption a5 0
- neci 1
+ authentication optional
+ neci 0
  paging any use tch 0
  rrlp mode none
- mm info 1
+ mm info 0
  handover 0
  handover window rxlev averaging 10
  handover window rxqual averaging 1
@@ -28,21 +24,25 @@ network
  handover power budget interval 6
  handover power budget hysteresis 3
  handover maximum distance 9999
+ dyn_ts_allow_tch_f 0
+ periodic location update 30
  bts 0
-  type nanobts
+  type sysmobts
   band DCS1800
   cell_identity 0
   location_area_code 1
-  training_sequence_code 7
   base_station_id_code 63
   ms max power 15
   cell reselection hysteresis 4
   rxlev access min 0
+  radio-link-timeout 32
   channel allocator ascending
   rach tx integer 9
   rach max transmission 7
-  dtx uplink force
-  dtx downlink
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
   ip.access unit_id 0 0
   oml ip.access stream_id 255 line 0
   neighbor-list mode manual-si5
@@ -50,11 +50,14 @@ network
   neighbor-list add arfcn 200
   si5 neighbor-list add arfcn 10
   si5 neighbor-list add arfcn 20
+  codec-support fr
   gprs mode none
+  no force-combined-si
   trx 0
    rf_locked 0
    arfcn 871
    nominal power 23
+   ! to use full TRX power, set max_power_red 0
    max_power_red 20
    rsl e1 tei 0
    timeslot 0
@@ -81,21 +84,24 @@ network
    timeslot 7
     phys_chan_config TCH/F
     hopping enabled 0
-cs7 instance 1
- point-code 3.0.0
- sccp-address bsc_local
-  point-code 3.0.0
- sccp-address msc_remote
-  point-code 1.0.0
-msc
- bsc-addr bsc_local
- msc-addr msc_remote
+msc 0
  ip.access rtp-base 4000
  timeout-ping 20
  timeout-pong 5
- dest 192.168.100.11 6666 0
- access-list-name msc-list
- no access-list-name
+ no timeout-ping advanced
+ no bsc-welcome-text
+ no bsc-msc-lost-text
+ no bsc-grace-text
+ type normal
+ allow-emergency allow
+ amr-config 12_2k forbidden
+ amr-config 10_2k forbidden
+ amr-config 7_95k forbidden
+ amr-config 7_40k forbidden
+ amr-config 6_70k forbidden
+ amr-config 5_90k allowed
+ amr-config 5_15k forbidden
+ amr-config 4_75k forbidden
 bsc
- no access-list-name
- access-list-name bsc-list
+ mid-call-timeout 0
+ no missing-msc-text
diff --git a/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg b/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg
new file mode 100644
index 000000000..59e7090ff
--- /dev/null
+++ b/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg
@@ -0,0 +1,93 @@
+! osmo-bsc configuration example for custom SCCP addresses
+!
+e1_input
+ e1_line 0 driver ipa
+network
+ network country code 1
+ mobile network code 1
+ short name OsmoBSC
+ long name OsmoBSC
+ auth policy closed
+ authorized-regexp .*
+ location updating reject cause 13
+ encryption a5 0
+ authentication optional
+ neci 0
+ paging any use tch 0
+ rrlp mode none
+ mm info 0
+ handover 0
+ handover window rxlev averaging 10
+ handover window rxqual averaging 1
+ handover window rxlev neighbor averaging 10
+ handover power budget interval 6
+ handover power budget hysteresis 3
+ handover maximum distance 9999
+ dyn_ts_allow_tch_f 0
+ periodic location update 30
+ bts 0
+  type sysmobts
+  band DCS1800
+  cell_identity 0
+  location_area_code 1
+  base_station_id_code 63
+  ms max power 15
+  cell reselection hysteresis 4
+  rxlev access min 0
+  radio-link-timeout 32
+  channel allocator ascending
+  rach tx integer 9
+  rach max transmission 7
+  channel-descrption attach 1
+  channel-descrption bs-pa-mfrms 5
+  channel-descrption bs-ag-blks-res 1
+  early-classmark-sending forbidden
+  ip.access unit_id 0 0
+  oml ip.access stream_id 255 line 0
+  neighbor-list mode manual-si5
+  neighbor-list add arfcn 100
+  neighbor-list add arfcn 200
+  si5 neighbor-list add arfcn 10
+  si5 neighbor-list add arfcn 20
+  codec-support fr
+  gprs mode none
+  no force-combined-si
+  trx 0
+   rf_locked 0
+   arfcn 871
+   nominal power 23
+   ! to use full TRX power, set max_power_red 0
+   max_power_red 20
+   rsl e1 tei 0
+   timeslot 0
+    phys_chan_config CCCH+SDCCH4
+    hopping enabled 0
+   timeslot 1
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 2
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 3
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 4
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 5
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 6
+    phys_chan_config TCH/F
+    hopping enabled 0
+   timeslot 7
+    phys_chan_config TCH/F
+    hopping enabled 0
+cs7 instance 0
+ point-code 0.42.1
+ !asp asp-clnt-OsmoBSC 2905 0 m3ua
+ ! remote-ip 10.23.24.1  ! where to reach the STP
+ sccp-address msc_remote
+  point-code 0.23.1
+msc 0
+ msc-addr msc_remote