diff options
author | Neels Hofmeyr <neels@hofmeyr.de> | 2017-09-05 13:20:32 +0200 |
---|---|---|
committer | Harald Welte <laforge@gnumonks.org> | 2017-09-15 02:02:30 +0000 |
commit | 53daffbd994a47259868dee8f808123a31be9082 (patch) | |
tree | 77983fbc964f608b2976a2c1c9827ccd97f36493 /doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg | |
parent | 72fbc95c5584ba7a329b81ab8448fcebe145a133 (diff) |
doc/examples: tweak osmo-bsc.cfg, add osmo-bsc_custom-sccp.cfg
Now osmo-bsc.cfg's SCCP addresses work by internal defaults, while
osmo-bsc_custom-sccp.cfg shows how to use custom STP IP address and SCCP point
codes.
Change-Id: Icb41d5adc24b2ee5613be691a201df8f3566e5dd
Diffstat (limited to 'doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg')
-rw-r--r-- | doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg | 93 |
1 files changed, 93 insertions, 0 deletions
diff --git a/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg b/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg new file mode 100644 index 000000000..59e7090ff --- /dev/null +++ b/doc/examples/osmo-bsc/osmo-bsc_custom-sccp.cfg @@ -0,0 +1,93 @@ +! osmo-bsc configuration example for custom SCCP addresses +! +e1_input + e1_line 0 driver ipa +network + network country code 1 + mobile network code 1 + short name OsmoBSC + long name OsmoBSC + auth policy closed + authorized-regexp .* + location updating reject cause 13 + encryption a5 0 + authentication optional + neci 0 + paging any use tch 0 + rrlp mode none + mm info 0 + handover 0 + handover window rxlev averaging 10 + handover window rxqual averaging 1 + handover window rxlev neighbor averaging 10 + handover power budget interval 6 + handover power budget hysteresis 3 + handover maximum distance 9999 + dyn_ts_allow_tch_f 0 + periodic location update 30 + bts 0 + type sysmobts + band DCS1800 + cell_identity 0 + location_area_code 1 + base_station_id_code 63 + ms max power 15 + cell reselection hysteresis 4 + rxlev access min 0 + radio-link-timeout 32 + channel allocator ascending + rach tx integer 9 + rach max transmission 7 + channel-descrption attach 1 + channel-descrption bs-pa-mfrms 5 + channel-descrption bs-ag-blks-res 1 + early-classmark-sending forbidden + ip.access unit_id 0 0 + oml ip.access stream_id 255 line 0 + neighbor-list mode manual-si5 + neighbor-list add arfcn 100 + neighbor-list add arfcn 200 + si5 neighbor-list add arfcn 10 + si5 neighbor-list add arfcn 20 + codec-support fr + gprs mode none + no force-combined-si + trx 0 + rf_locked 0 + arfcn 871 + nominal power 23 + ! to use full TRX power, set max_power_red 0 + max_power_red 20 + rsl e1 tei 0 + timeslot 0 + phys_chan_config CCCH+SDCCH4 + hopping enabled 0 + timeslot 1 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 2 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 3 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 4 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 5 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 6 + phys_chan_config TCH/F + hopping enabled 0 + timeslot 7 + phys_chan_config TCH/F + hopping enabled 0 +cs7 instance 0 + point-code 0.42.1 + !asp asp-clnt-OsmoBSC 2905 0 m3ua + ! remote-ip 10.23.24.1 ! where to reach the STP + sccp-address msc_remote + point-code 0.23.1 +msc 0 + msc-addr msc_remote |