/* GSM Channel allocation routines * * (C) 2008 by Harald Welte * (C) 2008, 2009 by Holger Hans Peter Freyther * * All Rights Reserved * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU Affero General Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Affero General Public License for more details. * * You should have received a copy of the GNU Affero General Public License * along with this program. If not, see . * */ #include #include #include #include #include #include #include #include #include #include #include #include static int ts_is_usable(struct gsm_bts_trx_ts *ts) { /* FIXME: How does this behave for BS-11 ? */ if (is_ipaccess_bts(ts->trx->bts)) { if (!nm_is_running(&ts->mo.nm_state)) return 0; } /* If a TCH/F_PDCH TS is busy changing, it is already taken or not * yet available. */ if (ts->pchan == GSM_PCHAN_TCH_F_PDCH) { if (ts->flags & TS_F_PDCH_PENDING_MASK) return 0; } /* If a dynamic channel is busy changing, it is already taken or not * yet available. */ if (ts->pchan == GSM_PCHAN_TCH_F_TCH_H_PDCH) { if (ts->dyn.pchan_is != ts->dyn.pchan_want) return 0; } return 1; } int trx_is_usable(struct gsm_bts_trx *trx) { /* FIXME: How does this behave for BS-11 ? */ if (is_ipaccess_bts(trx->bts)) { if (!nm_is_running(&trx->mo.nm_state) || !nm_is_running(&trx->bb_transc.mo.nm_state)) return 0; } return 1; } static struct gsm_lchan * _lc_find_trx(struct gsm_bts_trx *trx, enum gsm_phys_chan_config pchan, enum gsm_phys_chan_config dyn_as_pchan) { struct gsm_bts_trx_ts *ts; int j, start, stop, dir, ss; int check_subslots; if (!trx_is_usable(trx)) return NULL; if (trx->bts->chan_alloc_reverse) { /* check TS 7..0 */ start = 7; stop = -1; dir = -1; } else { /* check TS 0..7 */ start = 0; stop = 8; dir = 1; } for (j = start; j != stop; j += dir) { ts = &trx->ts[j]; if (!ts_is_usable(ts)) continue; if (ts->pchan != pchan) continue; /* * Allocation for fully dynamic timeslots * (does not apply for ip.access style GSM_PCHAN_TCH_F_PDCH) * * Note the special nature of a dynamic timeslot in PDCH mode: * in PDCH mode, typically, lchan->type is GSM_LCHAN_NONE and * lchan->state is LCHAN_S_NONE -- an otherwise unused slot * becomes PDCH implicitly. In the same sense, this channel * allocator will never be asked to find an available PDCH * slot; only TCH/F or TCH/H will be requested, and PDCH mode * means that it is available for switchover. * * A dynamic timeslot in PDCH mode may be switched to TCH/F or * TCH/H. If a dyn TS is already in TCH/F or TCH/H mode, it * means that it is in use and its mode can't be switched. * * The logic concerning channels for TCH/F is trivial: there is * only one channel, so a dynamic TS in TCH/F mode is already * taken and not available for allocation. For TCH/H, we need * to check whether a dynamic timeslot is already in TCH/H mode * and whether one of the two channels is still available. */ switch (pchan) { case GSM_PCHAN_TCH_F_TCH_H_PDCH: if (ts->dyn.pchan_is != ts->dyn.pchan_want) { /* The TS's mode is being switched. Not * available anymore/yet. */ DEBUGP(DRLL, "%s already in switchover\n", gsm_ts_and_pchan_name(ts)); continue; } if (ts->dyn.pchan_is == GSM_PCHAN_PDCH) { /* This slot is available. Still check for * error states to be sure; in all cases the * first lchan will be used. */ if (ts->lchan->state != LCHAN_S_NONE && ts->lchan->state != LCHAN_S_ACTIVE) continue; return ts->lchan; } if (ts->dyn.pchan_is != dyn_as_pchan) /* not applicable. */ continue; /* The requested type matches the dynamic timeslot's * current mode. A channel may still be available * (think TCH/H). */ check_subslots = ts_subslots(ts); break; case GSM_PCHAN_TCH_F_PDCH: /* Available for voice when in PDCH mode */ if (ts_pchan(ts) != GSM_PCHAN_PDCH) continue; /* Subslots of a PDCH ts don't need to be checked. */ return ts->lchan; default: /* Not a dynamic channel, there is only one pchan kind: */ check_subslots = ts_subslots(ts); break; } /* Is a sub-slot still available? */ for (ss = 0; ss < check_subslots; ss++) { struct gsm_lchan *lc = &ts->lchan[ss]; if (lc->type == GSM_LCHAN_NONE && lc->state == LCHAN_S_NONE) return lc; } } return NULL; } static struct gsm_lchan * _lc_dyn_find_bts(struct gsm_bts *bts, enum gsm_phys_chan_config pchan, enum gsm_phys_chan_config dyn_as_pchan) { struct gsm_bts_trx *trx; struct gsm_lchan *lc; if (bts->chan_alloc_reverse) { llist_for_each_entry_reverse(trx, &bts->trx_list, list) { lc = _lc_find_trx(trx, pchan, dyn_as_pchan); if (lc) return lc; } } else { llist_for_each_entry(trx, &bts->trx_list, list) { lc = _lc_find_trx(trx, pchan, dyn_as_pchan); if (lc) return lc; } } return NULL; } static struct gsm_lchan * _lc_find_bts(struct gsm_bts *bts, enum gsm_phys_chan_config pchan) { return _lc_dyn_find_bts(bts, pchan, GSM_PCHAN_NONE); } /* Allocate a logical channel. * * Dynamic channel types: we always prefer a dedicated TS, and only pick + * switch a dynamic TS if no pure TS of the requested PCHAN is available. * * TCH_F/PDCH: if we pick a PDCH ACT style dynamic TS as TCH/F channel, PDCH * will be disabled in rsl_chan_activate_lchan(); there is no need to check * whether PDCH mode is currently active, here. */ struct gsm_lchan *lchan_alloc(struct gsm_bts *bts, enum gsm_chan_t type, int allow_bigger) { struct gsm_lchan *lchan = NULL; enum gsm_phys_chan_config first, first_cbch, second, second_cbch; switch (type) { case GSM_LCHAN_SDCCH: if (bts->chan_alloc_reverse) { first = GSM_PCHAN_SDCCH8_SACCH8C; first_cbch = GSM_PCHAN_SDCCH8_SACCH8C_CBCH; second = GSM_PCHAN_CCCH_SDCCH4; second_cbch = GSM_PCHAN_CCCH_SDCCH4_CBCH; } else { first = GSM_PCHAN_CCCH_SDCCH4; first_cbch = GSM_PCHAN_CCCH_SDCCH4_CBCH; second = GSM_PCHAN_SDCCH8_SACCH8C; second_cbch = GSM_PCHAN_SDCCH8_SACCH8C_CBCH; } lchan = _lc_find_bts(bts, first); if (lchan == NULL) lchan = _lc_find_bts(bts, first_cbch); if (lchan == NULL) lchan = _lc_find_bts(bts, second); if (lchan == NULL) lchan = _lc_find_bts(bts, second_cbch); /* allow to assign bigger channels */ if (allow_bigger) { if (lchan == NULL) { lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_H); if (lchan) type = GSM_LCHAN_TCH_H; } if (lchan == NULL) { lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F); if (lchan) type = GSM_LCHAN_TCH_F; } /* try dynamic TCH/F_PDCH */ if (lchan == NULL) { lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F_PDCH); /* TCH/F_PDCH will be used as TCH/F */ if (lchan) type = GSM_LCHAN_TCH_F; } /* try fully dynamic TCH/F_TCH/H_PDCH */ if (lchan == NULL) { lchan = _lc_dyn_find_bts(bts, GSM_PCHAN_TCH_F_TCH_H_PDCH, GSM_PCHAN_TCH_H); if (lchan) type = GSM_LCHAN_TCH_H; } /* * No need to check fully dynamic channels for TCH/F: * if no TCH/H was available, neither will be TCH/F. */ } break; case GSM_LCHAN_TCH_F: lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F); /* If we don't have TCH/F available, fall-back to TCH/H */ if (!lchan) { lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_H); if (lchan) type = GSM_LCHAN_TCH_H; } /* If we don't have TCH/H either, try dynamic TCH/F_PDCH */ if (!lchan) { lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F_PDCH); /* TCH/F_PDCH used as TCH/F -- here, type is already * set to GSM_LCHAN_TCH_F, but for clarity's sake... */ if (lchan) type = GSM_LCHAN_TCH_F; } /* Try fully dynamic TCH/F_TCH/H_PDCH as TCH/F... */ if (!lchan && bts->network->dyn_ts_allow_tch_f) { lchan = _lc_dyn_find_bts(bts, GSM_PCHAN_TCH_F_TCH_H_PDCH, GSM_PCHAN_TCH_F); if (lchan) type = GSM_LCHAN_TCH_F; } /* ...and as TCH/H. */ if (!lchan) { lchan = _lc_dyn_find_bts(bts, GSM_PCHAN_TCH_F_TCH_H_PDCH, GSM_PCHAN_TCH_H); if (lchan) type = GSM_LCHAN_TCH_H; } break; case GSM_LCHAN_TCH_H: lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_H); /* If we don't have TCH/H available, fall-back to TCH/F */ if (!lchan) { lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F); if (lchan) type = GSM_LCHAN_TCH_F; } /* No dedicated TCH/x available -- try fully dynamic * TCH/F_TCH/H_PDCH */ if (!lchan) { lchan = _lc_dyn_find_bts(bts, GSM_PCHAN_TCH_F_TCH_H_PDCH, GSM_PCHAN_TCH_H); if (lchan) type = GSM_LCHAN_TCH_H; } /* * No need to check TCH/F_TCH/H_PDCH channels for TCH/F: * if no TCH/H was available, neither will be TCH/F. */ /* If we don't have TCH/F either, try dynamic TCH/F_PDCH */ if (!lchan) { lchan = _lc_find_bts(bts, GSM_PCHAN_TCH_F_PDCH); if (lchan) type = GSM_LCHAN_TCH_F; } break; default: LOGP(DRLL, LOGL_ERROR, "Unknown gsm_chan_t %u\n", type); } if (lchan) { lchan->type = type; LOGP(DRLL, LOGL_INFO, "%s Allocating lchan=%u as %s\n", gsm_ts_and_pchan_name(lchan->ts), lchan->nr, gsm_lchant_name(lchan->type)); /* clear sapis */ memset(lchan->sapis, 0, ARRAY_SIZE(lchan->sapis)); /* clear multi rate config */ memset(&lchan->mr_ms_lv, 0, sizeof(lchan->mr_ms_lv)); memset(&lchan->mr_bts_lv, 0, sizeof(lchan->mr_bts_lv)); lchan->broken_reason = ""; } else { struct challoc_signal_data sig; LOGP(DRLL, LOGL_ERROR, "Failed to allocate %s channel\n", gsm_lchant_name(type)); sig.bts = bts; sig.type = type; osmo_signal_dispatch(SS_CHALLOC, S_CHALLOC_ALLOC_FAIL, &sig); } return lchan; } /* Free a logical channel */ void lchan_free(struct gsm_lchan *lchan) { struct challoc_signal_data sig; int i; sig.type = lchan->type; lchan->type = GSM_LCHAN_NONE; if (lchan->conn) { struct lchan_signal_data sig; /* We might kill an active channel... */ sig.lchan = lchan; sig.mr = NULL; osmo_signal_dispatch(SS_LCHAN, S_LCHAN_UNEXPECTED_RELEASE, &sig); } if (lchan->abis_ip.rtp_socket) { LOGP(DRLL, LOGL_ERROR, "%s RTP Proxy Socket remained open.\n", gsm_lchan_name(lchan)); rtp_socket_free(lchan->abis_ip.rtp_socket); lchan->abis_ip.rtp_socket = NULL; } /* stop the timer */ osmo_timer_del(&lchan->T3101); /* clear cached measuement reports */ lchan->meas_rep_idx = 0; for (i = 0; i < ARRAY_SIZE(lchan->meas_rep); i++) { lchan->meas_rep[i].flags = 0; lchan->meas_rep[i].nr = 0; } for (i = 0; i < ARRAY_SIZE(lchan->neigh_meas); i++) lchan->neigh_meas[i].arfcn = 0; if (lchan->rqd_ref) { talloc_free(lchan->rqd_ref); lchan->rqd_ref = NULL; lchan->rqd_ta = 0; } sig.lchan = lchan; sig.bts = lchan->ts->trx->bts; osmo_signal_dispatch(SS_CHALLOC, S_CHALLOC_FREED, &sig); if (lchan->conn) { LOGP(DRLL, LOGL_ERROR, "the subscriber connection should be gone.\n"); lchan->conn = NULL; } /* FIXME: ts_free() the timeslot, if we're the last logical * channel using it */ } /* * There was an error with the TRX and we need to forget * any state so that a lchan can be allocated again after * the trx is fully usable. * * This should be called after lchan_free to force a channel * be available for allocation again. This means that this * method will stop the "delay after error"-timer and set the * state to LCHAN_S_NONE. */ void lchan_reset(struct gsm_lchan *lchan) { osmo_timer_del(&lchan->T3101); osmo_timer_del(&lchan->T3109); osmo_timer_del(&lchan->T3111); osmo_timer_del(&lchan->error_timer); lchan->type = GSM_LCHAN_NONE; lchan->state = LCHAN_S_NONE; if (lchan->abis_ip.rtp_socket) { rtp_socket_free(lchan->abis_ip.rtp_socket); lchan->abis_ip.rtp_socket = NULL; } } /* Drive the release process of the lchan */ static void _lchan_handle_release(struct gsm_lchan *lchan, int sacch_deact, int mode) { /* Release all SAPIs on the local end and continue */ rsl_release_sapis_from(lchan, 1, RSL_REL_LOCAL_END); /* * Shall we send a RR Release, start T3109 and wait for the * release indication from the BTS or just take it down (e.g. * on assignment requests) */ if (sacch_deact) { gsm48_send_rr_release(lchan); /* Deactivate the SACCH on the BTS side */ rsl_deact_sacch(lchan); rsl_start_t3109(lchan); } else if (lchan->sapis[0] == LCHAN_SAPI_UNUSED) { rsl_direct_rf_release(lchan); } else { rsl_release_request(lchan, 0, mode); } } /* Consider releasing the channel now */ int lchan_release(struct gsm_lchan *lchan, int sacch_deact, enum rsl_rel_mode mode) { DEBUGP(DRLL, "%s starting release sequence\n", gsm_lchan_name(lchan)); rsl_lchan_set_state(lchan, LCHAN_S_REL_REQ); lchan->conn = NULL; _lchan_handle_release(lchan, sacch_deact, mode); return 1; } void bts_chan_load(struct pchan_load *cl, const struct gsm_bts *bts) { struct gsm_bts_trx *trx; llist_for_each_entry(trx, &bts->trx_list, list) { int i; /* skip administratively deactivated tranxsceivers */ if (!nm_is_running(&trx->mo.nm_state) || !nm_is_running(&trx->bb_transc.mo.nm_state)) continue; for (i = 0; i < ARRAY_SIZE(trx->ts); i++) { struct gsm_bts_trx_ts *ts = &trx->ts[i]; struct load_counter *pl = &cl->pchan[ts->pchan]; int j; int subslots; /* skip administratively deactivated timeslots */ if (!nm_is_running(&ts->mo.nm_state)) continue; subslots = ts_subslots(ts); for (j = 0; j < subslots; j++) { struct gsm_lchan *lchan = &ts->lchan[j]; pl->total++; switch (lchan->state) { case LCHAN_S_NONE: break; default: pl->used++; break; } } } } } void network_chan_load(struct pchan_load *pl, struct gsm_network *net) { struct gsm_bts *bts; memset(pl, 0, sizeof(*pl)); llist_for_each_entry(bts, &net->bts_list, list) bts_chan_load(pl, bts); }