Source: openbsc Maintainer: Harald Welte Section: net Priority: optional Build-Depends: debhelper (>= 9), autotools-dev, autoconf-archive, pkg-config, libgtp0-dev, libosmocore-dev, libosmo-sccp-dev, libdbi0-dev, dh-autoreconf, libosmo-abis-dev, libosmo-netif-dev, libdbd-sqlite3, libpcap-dev, libssl-dev, libc-ares-dev, libsmpp34-dev Standards-Version: 3.9.8 Vcs-Git: git://bs11-abis.gnumonks.org/openbsc.git Vcs-Browser: http://openbsc.osmocom.org/trac/browser Homepage: https://projects.osmocom.org/projects/openbsc Package: osmocom-bsc Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: GSM Base Station Controller This is the BSC-only version of OpenBSC. It requires a Mobile Switching Center (MSC) to operate. . You might rather prefer to use osmocom-nitb which is considered a "GSM Network-in-a-Box" and does not depend on a MSC. Package: osmocom-nitb Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends}, libdbd-sqlite3 Description: GSM Network-in-a-Box, implements BSC, MSC, SMSC, HLR, VLR This is the Network-in-a-Box version of OpenBSC. It has all the GSM network components bundled together. When using osmocom-nitb, there is no need for a Mobile Switching Center (MSC) which is needed when using osmocom-bsc. Package: osmocom-ipaccess-utils Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: Command line utilities for ip.access nanoBTS This package contains utilities that are specific for nanoBTS when being used together with OpenBSC. It contains mainly three tools: ipaccess-find, ipaccess-config and ipaccess-proxy. Package: osmocom-bs11-utils Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: Command line utilities for Siemens BS-11 BTS There is a tool in this package for configuring the Siemens BS-11 BTS. Additionally, it contains one tool for making use of an ISDN-card and the public telephone network as frequency standard for the E1 line. Package: osmocom-sgsn Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Suggests: osmocom-bsc Description: Osmocom Serving GPRS Support Node This is an implementation of the GPRS Serving GPRS Support Node (SGSN). As such it implements the GPRS Mobility Management (GMM) and SM (Session Management). . The SGSN connects via the Gb-interface to the BSS (like the osmo-pcu or an ip.access nanoBTS), and it connects via the GTP protocol to a Gateway GPRS Support Node (GGSN) like openggsn. Package: osmocom-gbproxy Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Recommends: osmocom-sgsn Description: Osmocom GPRS Gb Interface Proxy The purpose of the Gb proxy is to aggregate the Gb links of multiple BSS's and present them in one Gb link to the SGSN. . This package is part of OpenBSC and closely related to osmocom-sgsn. Package: osmocom-bsc-nat Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Recommends: osmocom-bsc Description: Osmocom Base Station Controller Network Address Translation This NAT is useful for masquerading multiple BSCs behind one. It listens for incoming BSCs on port 5000 and connects to a specified Mobile Switching Center (MSC). . This package is part of OpenBSC and closely related to osmocom-bsc. Package: openbsc-dev Architecture: all Depends: ${misc:Depends} Description: Header file needed by tools tightly integrated Some other programs depend on gsm_data_shared.h and gsm_data_shared.c from OpenBSC. This package installs these files to your file system so that the other packages can build-depend on this package. . The directory structure is copied after the structure in the repository and the header and .c file are installed into /usr/src/osmocom/openbsc/. Package: osmo-gtphub Architecture: any Depends: ${shlibs:Depends}, ${misc:Depends} Description: Osmocom GTP Hub Proxy for comms between multiple SGSNs and GGSNs. Package: osmocom-bsc-dbg Architecture: any Section: debug Priority: extra Depends: osmocom-bsc (= ${binary:Version}), ${misc:Depends} Description: Debug symbols for the OpenBSC BSC Make debugging possible Package: osmocom-nitb-dbg Architecture: any Section: debug Priority: extra Depends: osmocom-nitb (= ${binary:Version}), ${misc:Depends} Description: Debug symbols for the OpenBSC NITB Make debugging possible Package: osmocom-ipaccess-utils-dbg Architecture: any Section: debug Priority: extra Depends: osmocom-ipaccess-utils (= ${binary:Version}), ${misc:Depends} Description: Debug symbols for the OpenBSC ip.access utils Make debugging possible Package: osmocom-bs11-utils-dbg Architecture: any Section: debug Priority: extra Depends: osmocom-bs11-utils (= ${binary:Version}), ${misc:Depends} Description: Debug symbols for the OpenBSC BS11 utils Make debugging possible Package: osmocom-sgsn-dbg Architecture: any Section: debug Priority: extra Depends: osmocom-sgsn (= ${binary:Version}), ${misc:Depends} Description: Debug symbols for the OpenBSC Serving GPRS Support Node Make debugging possible Package: osmocom-gbproxy-dbg Architecture: any Section: debug Priority: extra Depends: osmocom-gbproxy (= ${binary:Version}), ${misc:Depends} Description: Debug symbols for the OpenBSC GPRS GBProxy Make debugging possible Package: osmocom-bsc-nat-dbg Architecture: any Section: debug Priority: extra Depends: osmocom-bsc-nat (= ${binary:Version}), ${misc:Depends} Description: Debug symbols for the OpenBSC Network Address Translation Make debugging possible Package: osmo-gtphub-dbg Architecture: any Section: debug Priority: extra Depends: osmo-gtphub (= ${binary:Version}), ${misc:Depends} Description: Debug symbols for Osmocom GTP Hub Make debugging possible