Age | Commit message (Collapse) | Author | Files | Lines |
|
Currently the definitions of the message PURGE_MS_RES and
PURGE_MS_ERR are missing in the specification.
This patch adds those definitions.
Sponsored-by: On-Waves ehf
|
|
This commit adds talloc reports to log remaining NULL chunks after the
terminates. It also adds explicit checks for empty subscriber lists.
Sponsored-by: On-Waves ehf
|
|
This test replaces gprs_gsup_client_send by a custom function, that
emulates a GSUP remote peer by calling gprs_subscr_rx_gsup_message
with responses for all requests. It then executes a full
Attach/Detach cycle.
Sponsored-by: On-Waves ehf
|
|
Set the expiry delay after the subscriber has been deleted (e.g. by
freeing the MM context). If cancelled, the subscriber will be deleted
immediately and no timeout will be set. If the expiry time is set to
SGSN_TIMEOUT_NEVER, no timer will be started and the subscriber entry
will be kept until it is cancelled.
The following VTY command is added to the sgsn node:
- subscriber-expiry-time <0-999999> set expiry time in seconds
- no subscriber-expiry-time set to SGSN_TIMEOUT_NEVER
The default is an expiry time of 0 seconds, which means that the
subscriber entries are wiped out immediately after an MM context is
destroyed.
Note that unused MM contexts are not expired yet. Therefore the
subscriber will only be expired after a successful MM detach.
Sponsored-by: On-Waves ehf
|
|
The code sequence that checks, whether a subscriber is still
reachable for a given IMSI, is repeated several times.
This patch puts this code sequence into a single function and adds a
check for the IMSI after the entry has been found. In addition,
some comments are extended.
Sponsored-by: On-Waves ehf
|
|
Currently the subscribers are not really deleted by
cleanup_subscr_by_imsi, but kept in RAM instead.
This patch fixes this and adds a test to verify, that the subscriber
is really deleted afterwards.
Sponsored-by: On-Waves ehf
|
|
Refactor several occurences of the same subscriber cleanup code into
a seperate cleanup_subscr_by_imsi function.
Sponsored-by: On-Waves ehf
|
|
Currently the error causes MSC_TEMP_NOTREACH, NET_FAIL, and
CONGESTION are silently dropped to force the MS to continue. On the
other hand, GSM 04.08/24.008, 4.7.3.1.4 in combination with 4.7.3.1.5,
require the MS to retry the attachment procedure for cause codes
above 15 instead of disabling GPRS. All of the mentioned GMM causes
have codes above 15, so using a REJECT message including the cause
code is a better choice. This way, the retry algorithm based on T3311
(15s, 5 times) and T3302 (default 12min) could be used.
This patch modifies gprs_subscr_handle_gsup_auth_err and
gprs_subscr_handle_gsup_upd_loc_err to proceed like when the access
has beed denied, except that the corresponding subscriber's
information fields are not cleared.
This has been successfully tested which an iphone which enters a
retry loop as it is being described in the specification.
Sponsored-by: On-Waves ehf
|
|
To unify the layout of the logging messages in gprs_subscriber.c,
this patch replaces each LOGP by LOGGSUBSCRP, unless a non-NULL
pointer to a subscr is not available. In those cases, it uses
LOGMMCTXP if a pointer to an MM context is available or LOGP
otherwise.
Sponsored-by: On-Waves ehf
|
|
This patch adds a new logging macro, that logs to DGPRS and provides
a uniform prefix containing the IMSI without using the mm reference.
This is an improvement over using LOGMMCTXP, since the new macro also
provides an IMSI if no MM context is attached.
Sponsored-by: On-Waves ehf
|
|
Currently the GSUP message handling function in gprs_subscriber.c and
the functions in gprs_gsup_messages.c are not consistent with respect
to the return codes if an error happens. Albeit all error return
codes are negative, the semantics of the absolute value are not
clearly defined. In addition, some return codes are not passed to the
calling function.
This path changes these functions to always return a negated GMM
cause value in case of errors. Return values of called parser
functions are not longer ignored.
Sponsored-by: On-Waves ehf
|
|
Currently always a cause with the meaning of 'access denied' is
assumed. gprs_subscr_handle_gsup_auth_err just clears the auth
triplets and the authorized flag before calling the update function.
gprs_subscr_handle_gsup_upd_loc_err only clears the authorized flag
and calls the update function. This means, that an MS will not retry
to attach even on temporary network errors.
This patch changes these functions to use the GSUP error cause value
to decide, whether to clear the corresponding subscriber fields, to
just continue with the corresponding update function, or to log,
ignore and not pass the cause to the MS in case the error is directly
related to the GSUP protocol. The subscriber's error_cause field is
updated, if the update function is going to be called. The
error_cause fielt is reset on non-error GSUP messages.
Sponsored-by: On-Waves ehf
|
|
This patch extends gsm0408_gprs_access_denied and
gsm0408_gprs_access_cancelled to accept GMM cause codes. These are
then passed to the MS, unless gsm0408_gprs_access_cancelled is called
with cause 0 (no error -> updateProcedure).
Since gsm0408_gprs_access_denied uses GMM_CAUSE_GPRS_NOTALLOWED if
the cause is not set, and the subscriber's error_cause is never set
(and thus always 0), the SGSN's behaviour does not change with this
patch.
Sponsored-by: On-Waves ehf
Conflicts:
openbsc/include/openbsc/gprs_sgsn.h
[hfreyther: Conflict due the removal of the unused
authenticate flag]
|
|
Currently the mapping between GSM 04.08 (GPRS) protocol specific
numbers and their textual description was put into gprs_gmm.c and not
exported.
This commit moves the mappings to a new file gsm_04_08_gprs.c,
renames some of them, and exports them via gsm_04_08_gprs.h.
The following identifiers are renamed to match the corresponding type
names:
- gmm_cause_names -> gsm48_gmm_cause_names
- gsm_cause_names -> gsm48_gsm_cause_names
Sponsored-by: On-Waves ehf
|
|
This commit adds a line to the output of 'show sgsn' if the GSUP
client has been initialized:
- Remote authorization: [not] connected to HOST:PORT via GSUP
Sponsored-by: On-Waves ehf
|
|
Currently, the reconnect mechanism relies on gsup_client_updown_cb
which in turn gets called based on the OS' view of connection state.
This patch adds a timer based PING mechanism that regularly sends
PING messages and forces a reconnect if a PONG message won't be
received until the next PING message is scheduled. The current ping
interval is 20s.
Sponsored-by: On-Waves ehf
Conflicts:
openbsc/src/gprs/gprs_gsup_client.c
[hfreyther: Conflicts due the potential memleak fix by me. Removed
another TODO from the code as we stop the ping/pong timer]
|
|
Currently the IPA CCM messages are not handled by the GSUP client.
This means, that the client doesn't answer to PING and ID_GET and
logs notices when receiving PONG or ID_ACK. At least the PING
functionality (remotely originated PING) shall be supported.
This patch extends gsup_client_read_cb by a call to
ipaccess_bts_handle_ccm. Only when the return code is 0, the message
is processed further and checked for an OSMO/GSUP message. ID_GET
messages are answered by a dummy description, where only the
unit_name is set to 'SGSN'.
Sponsored-by: On-Waves ehf
|
|
The ipa_client_conn_open function does not distinguish between a
connection being already established or waiting for establishment.
In either case, the application gets informed about the connection
state via the updown_cb. The 'up' parameter is only set, if
poll/select consider the socket as writable.
This patch handles both cases equally and fully relies on the
updown_cb to adjust the gsupc obejct state.
Sponsored-by: On-Waves ehf
|
|
Currently, messages are added to the tx queue even if the connection
is down for some reason and all of these messages are eventually sent
after a re-connect. The MS has probably sent several Attach Requests
while the connection was down and will continue doing so. Therefore
these stored messages could be dropped.
This patch clears the queue before re-connecting and also extends
gprs_gsup_client_send to return immediately, when the connection is
not established instead of calling ipa_client_conn_send.
Sponsored-by: On-Waves ehf
[hfreyther: Replaced
while (!llist_empty(&gsupc->link->tx_queue))
llist_del(gsupc->link->tx_queue.next);
with new libosmo-abis API]
|
|
Currently the GSUP connection to a server is not restarted if the
connection cannot be established or is terminated during operation.
This commit adds a timer based connection mechanism, basically
consisting of a timer callback that calls gsup_client_connect. The
timer is eventually triggered (up == 0) or cleared (up != 0) by
gsup_client_updown_cb. It adds calls to osmo_timer_del() to
gsup_client_connect and gprs_gsup_client_destroy. The latter is now
called instead of talloc_free in gprs_gsup_client_create on error to
be on the safe side.
Sponsored-by: On-Waves ehf
|
|
This patch extends test_gmm_attach to optionally resend Attach
Requests until the SGSN responds to it instead of calling
OSMO_ASSERT at a few places. The test_gmm_attach_subscr_gsup_auth
test optionally uses this feature. It is called once in either mode.
Sponsored-by: On-Waves ehf
|
|
This test calls test_gmm_attach() where the mocked subscriber
functions insert GSUP messages instead of manipulating the
subscriber structure directly.
Sponsored-by: On-Waves ehf
|
|
Currently, several lines of boiler plate are needed around a call to
gprs_subscr_rx_gsup_message.
This patch puts all of this (including the call to
gprs_subscr_rx_gsup_message) into a separate function.
Sponsored-by: On-Waves ehf
|
|
This flag is used to determine, whether the Update Location procedure
shall be invoked. This is currently only set, when the 'remote'
authorization policy is set. When the flag is set, sgsn_auth_update
will not never be called directly by sgsn_auth_request, if an Attach
Request procedure is pending, even if the remote connection fails for
some reason.
Sponsored-by: On-Waves ehf
|
|
This has been obsoleted by the previous commit. Remove it.
|
|
Currently the flag 'authenticate' is managed per subscriber.
This patch replaces that flag by a global cfg.require_authentication
flag that enables/disables the use of the Auth & Ciph procedure for
every subscriber. The flag is set by the VTY, if and only if the
authorization policy is 'remote'.
The VTY command
- update-subscriber imsi IMSI insert authenticate <0-1>
is removed.
Sponsored-by: On-Waves ehf
|
|
This commit adds GSUP client configuration (via VTY), connection set
up, and real message sending.
The following configuration commands are added:
- gsup remote-ip A.B.C.D set server IP address
- gsup remote-port PORT set server TCP port
Ticket: OW#1338
Sponsored-by: On-Waves ehf
|
|
This commit adds the client code to get subscriber information from a
remote server. It provides an IPA over TCP connection to transmit and
receive GSUP messages.
Sponsored-by: On-Waves ehf
|
|
Currently the message structure is not cleared before the message is
parsed which can cause information leaking between messages if the
same gprs_gsup_message object is used. Especially list elements (auth
tuples and pdp info) are not replaced by an IE, but the IE is
appended.
This patch uses the assignment operator to clear gprs_gsup_message,
gsm_auth_tuple, and gprs_gsup_pdp_info before using them. This also
replaces the use of memcpy of the latter.
Sponsored-by: On-Waves ehf
|
|
Currently auth tuples are always appended to the lists when
gprs_gsup_decode is called with a gsup_msg structure. This makes a
test case fail, where the same gsup_msg is used again and again
without clearing it after each use.
Sponsored-by: On-Waves ehf
|
|
Currently, the gprs_gsup_decode function doesn't check the return
value of gprs_shift_v_fixed before using the value pointer. The
function fails, if the GSUP message length (not including IPA
headers) is 0. In this case, a segfault can happen, depending on the
value of the uninitialized 'value' pointer. The test case doesn't
trigger a segfault, but valgrind complains about reading
uninitialized data.
This patch adds a check for the return value that would return with
an error code if the shift function failed.
Sponsored-by: On-Waves ehf
|
|
Currently, the tests only use valid GSUP messages. This does not
check the robustness of the parser.
This commit adds a test for truncated messages and another for
modified messages.
Thanks to Holger for the basic truncation test.
Sponsored-by: On-Waves ehf
|
|
Currently the mocked bssgp_tx_dl_ud function used for testing in
sgsn_test.c does not free the msg as it is done by the original
function. This leads to a msgb leak in the test.
This patch fixes the test code accordingly and uncomments the
assertion that checks for left-over msgbs.
Sponsored-by: On-Waves ehf
|
|
This commit adds talloc reports to log remaining chunks after the
testing has been finished. It also adds a (currently disabled) check,
that no msgbs are allocated after running the tests.
Sponsored-by: On-Waves ehf
|
|
This patch extends gprs_subscr_query_auth_info and
gprs_subscr_location_update to create GSUP messages with the help of
a static gprs_subscr_tx_gsup_message function. A corresponding
gprs_subscr_rx_gsup_message is added which takes a messages, gets the
subscr, and updates it accordingly.
Sponsored-by: On-Waves ehf
[hfreyther: Added a msgb_free gprs_subscr_tx_gsup_message]
|
|
This patch adds functions to encode and decode GSUP messages. This
does not include the layer 1 framing (IPA). The messages so far
supported are: send_auth_info_*, update_location_*,
location_cancellation_*.
Sponsored-by: On-Waves ehf
|
|
This commit adds the default protocol identifiers that should be used
for GSUP by the IPA protocol.
Sponsored-by: On-Waves ehf
|
|
This is the first version of the specification for the GPRS
Subscriber Update Protocol.
Sponsored-by: On-Waves ehf
|
|
Currently the result of the osmo_hexparse function in
update_subscr_insert_auth_triplet is not handled correctly. There is
a misplaced leading exclamation mark in a few conditional
expressions. This effectively disables the error checks, as it is
noticed by Coverity ("Missing parentheses" followed by "Logically
dead code").
This patch removes the exclamation marks.
Fixes: Coverity CID 1260435 and CID 1260434
Sponsored-by: On-Waves ehf
|
|
The code assumes that sqlite3.h is in the standard include
path. Maybe sqlite3 wasn't installed or resides in a non
standard (/usr/local) location? Fix the build as it has been
broken since 1st of January.
|
|
This reverts commit c598e6e0a6d00827c2c974010d582815d66d0f14.
It introduced a dependency from libcommon to libosmovty, which we don't
want
|
|
Spotted by Jacob Erlbeck.
|
|
|
|
|
|
This is a normal situation under high load: The BTS is out of resources
and the BSC cannot allocate any dedicated channel. We may send an IMM
ASS REJECT back to the MS. All well within normal parameters, not an
error that needs to be reported back to the caller, who propagates it
all the way up to libosmo-abis.
|
|
|
|
Move the "logging filter imsi IMSI" into the BTS/NITB code to
allow to set the gsm_subscriber and only compare it. This way
we simply compare the subscriber address and don't have to care
if the subscriber data is still valid.
|
|
|
|
Remember why a channel is being marked as broken. So we can
maybe understand what happend.
|
|
|