| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When reading from RTP socket, the first read() may fail right after
connecting to remote socket. Subsequent read() will work as it should.
If the remote socket does not open fast enough, the transmitted RTP
payload can cause an ICMP (connection refused) packet reply. This causes
the read to fail with errno=111. In all other error cases, the errno is
logged at debug level. In all error cases, reading is not disabled.
|
|
After OpenBSC stalled for some reason (e.g. CPU overload or database
access) or after speech frames have been lost (MNCC application problems /
hold/retrieve call), the timestamp and the sequence number of the RTP
socket state must be corrected. The amount of incrmentation is calculated
from the elapsed time. Not incrementing timestamp and sequence number would
cause all frames to be dropped by ipaccess BTS, because the BTS expects
frames with more recent timestamps.
If speech frames are received too fast, they must be dropped. The timestamp
and sequence number of the RTP socket state are not changed in this case.
Incmenetating timestamp and sequence number would causes high delay at
ipaccess BTS, because the BTS would queue the frames until the timestamp
matches the current time.
There is a simple test case:
Make a call between two phones and check the delay. (When using LCR, make
a call to the echo test.) The press CTRL+z to suspend OpenBSC process for
a few seconds and enter "fg" to continue OpenBSC process. There shall be no
change in the delay, even after repeating this test many times.
|
|
Since EFR/AMR/HR codecs use dynamic RTP payload, the payload type can
be set. If it is set, the frame type must be set also, so OpenBSC
knows what frame types are received via RTP.
This modification only affects traffic beween application and MNCC
interface, not the RTP traffic between OpenBSC and BTS.
|
|
Instead of forwarding traffic through MNCC interface, traffic can
be forwarded to a given RTP peer directly. A special MNCC message
is used to control the peer's destination. The traffic can still be
forwarded through MNCC interface when this special MNCC message is
not used.
It also works with E1 based BTSs.
In conjunction with LCR's "rtp-bridge" feature, the RTP traffic
can be directly exchanged with a remote SIP endpoint, so that the
traffic is not forwarded by LCR itself. This way the performance
of handling traffic only depends on OpenBSC and the remote SIP
endpoint. Also the traffic is exchanged with the SIP endpoint
without transcoding, to have maximum performance.
Increment MNCC version to 5.
|
|
If a bad TRAU frame is received, it is forwarded to MNCC application
as GSM_BAD_FRAME. The application can now handle the GAP of missing
audio. (e.g. by extrapolation)
If TRAU frames are forwarded via RTP, bad frames are dropped, but frame
counter and timestamp of RTP sender state is incremented.
|
|
AMR rate is currently fixed to 5.9k.
|
|
|
|
status and channels status
|
|
|
|
queue status
|
|
|
|
|
|
|
|
|
|
|
|
The code in the BSC/NAT called ipaccess_rcvmsg_base without
checking if the protocol is IPA. This lead the BSC to respond
to SCCP messages with an "ID ACK". From a quick look neither
the code of ipaccess_rcvmsg_base in OpenBSC nor the copy of
libosmo-abis ever checked the protocol header. So this code
has been wrong since initially being created in 2010.
|
|
The sender_id is gone so the code that attempted to delete SMS
didn't work anymore. Delete the SMS based on src_addr or the
dest_addr.
Fixes:
======================================================================
ERROR: testSubscriberAddRemove (__main__.TestCtrlNITB)
----------------------------------------------------------------------
Traceback (most recent call last):
File "tests/ctrl_test_runner.py", line 379, in testSubscriberAddRemove
r = self.do_set('subscriber-delete-v1', '2620345')
File "tests/ctrl_test_runner.py", line 114, in do_set
return self.recv_msgs()[id]
KeyError: 1002
|
|
|
|
This is mostly based on Alexander's migration code. The code
adds transaction handling and some sanity checks and cleanups
to the code. We made the decision to fork the sms_from_result
method and freeze it to that version. This way sms_from_result
can move forward without having to deal with legacy.
|
|
That was a bad idea from the very beginning. A visible result of this is a wrong
SMS routing when you change subscriber extensions, while having queued SMS. It's
also a very wrong thing from the code layering perspective.
I think the next logical step should be to remove "receiver" pointer from
the gsm_sms structure into a structure, special for the internal SMS queue.
|
|
This is an incompatible database schema change. Store the type of
the address in the database for both the sender and the receiver.
Currently it is possible to use SMPP to store a SMS and the NPI
and TON will be lost on the delivery of the SMS. The schema is
changed to make the delivery always use the right NPI/TON. This
patch is not ready for the master branch as there is no upgrade
path for the HLR yet.
|
|
|
|
Use memcpy to copy from the OML message into the stack and then
convert the network byte order.
network_listen.c: In function ‘test_rep’:
network_listen.c:145:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
test_rep_len = ntohs(*(uint16_t *) &foh->data[3]);
^
network_listen.c:153:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
ferr_list_len = ntohs(*(uint16_t *) &foh->data[7]);
^
network_listen.c:164:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
ferr_list_len = ntohs(*(uint16_t *) &foh->data[7]);
^
network_listen.c:130:11: warning: variable ‘test_rep_len’ set but not used [-Wunused-but-set-variable]
uint16_t test_rep_len, ferr_list_len;
|
|
Make the fill_fom_hdr return the header and use it throughout.
CC abis_nm.o
In file included from ../../include/openbsc/debug.h:8:0,
from abis_nm.c:38:
abis_nm.c: In function ‘abis_nm_opstart’:
abis_nm.c:1763:34: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
abis_nm_debugp_foh(DNM, (struct abis_om_fom_hdr *) oh->data);
^
/home/ich/install/openbsc/include/osmocom/core/logging.h:23:74: note: in definition of macro ‘DEBUGP’
#define DEBUGP(ss, fmt, args...) logp(ss, __FILE__, __LINE__, 0, fmt, ## args)
^
abis_nm.c:1763:2: note: in expansion of macro ‘abis_nm_debugp_foh’
abis_nm_debugp_foh(DNM, (struct abis_om_fom_hdr *) oh->data);
^
abis_nm.c:1763:34: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
abis_nm_debugp_foh(DNM, (struct abis_om_fom_hdr *) oh->data);
^
/home/ich/install/openbsc/include/osmocom/core/logging.h:23:74: note: in definition of macro ‘DEBUGP’
#define DEBUGP(ss, fmt, args...) logp(ss, __FILE__, __LINE__, 0, fmt, ## args)
^
abis_nm.c:1763:2: note: in expansion of macro ‘abis_nm_debugp_foh’
abis_nm_debugp_foh(DNM, (struct abis_om_fom_hdr *) oh->data);
^
abis_nm.c:1763:34: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
abis_nm_debugp_foh(DNM, (struct abis_om_fom_hdr *) oh->data);
^
/home/ich/install/openbsc/include/osmocom/core/logging.h:23:74: note: in definition of macro ‘DEBUGP’
#define DEBUGP(ss, fmt, args...) logp(ss, __FILE__, __LINE__, 0, fmt, ## args)
^
abis_nm.c:1763:2: note: in expansion of macro ‘abis_nm_debugp_foh’
abis_nm_debugp_foh(DNM, (struct abis_om_fom_hdr *) oh->data);
^
abis_nm.c:1763:34: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
abis_nm_debugp_foh(DNM, (struct abis_om_fom_hdr *) oh->data);
^
/home/ich/install/openbsc/include/osmocom/core/logging.h:23:74: note: in definition of macro ‘DEBUGP’
#define DEBUGP(ss, fmt, args...) logp(ss, __FILE__, __LINE__, 0, fmt, ## args)
^
abis_nm.c:1763:2: note: in expansion of macro ‘abis_nm_debugp_foh’
abis_nm_debugp_foh(DNM, (struct abis_om_fom_hdr *) oh->data);
^
abis_nm.c:1763:34: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
abis_nm_debugp_foh(DNM, (struct abis_om_fom_hdr *) oh->data);
^
/home/ich/install/openbsc/include/osmocom/core/logging.h:23:74: note: in definition of macro ‘DEBUGP’
#define DEBUGP(ss, fmt, args...) logp(ss, __FILE__, __LINE__, 0, fmt, ## args)
^
abis_nm.c:1763:2: note: in expansion of macro ‘abis_nm_debugp_foh’
abis_nm_debugp_foh(DNM, (struct abis_om_fom_hdr *) oh->data);
|
|
CC gprs_sndcp_vty.o
gprs_sndcp_vty.c: In function ‘vty_dump_sne’:
gprs_sndcp_vty.c:46:15: warning: unused variable ‘i’ [-Wunused-variable]
unsigned int i;
|
|
CC sgsn_libgtp.o
sgsn_libgtp.c: In function ‘create_pdp_conf’:
sgsn_libgtp.c:262:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
^
sgsn_libgtp.c: In function ‘cb_data_ind’:
sgsn_libgtp.c:432:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
|
|
CC gprs_llc.o
gprs_llc.c: In function ‘t200_expired’:
gprs_llc.c:322:2: warning: enumeration value ‘GPRS_LLES_UNASSIGNED’ not handled in switch [-Wswitch]
switch (lle->state) {
^
gprs_llc.c:322:2: warning: enumeration value ‘GPRS_LLES_ASSIGNED_ADM’ not handled in switch [-Wswitch]
gprs_llc.c:322:2: warning: enumeration value ‘GPRS_LLES_REMOTE_EST’ not handled in switch [-Wswitch]
gprs_llc.c:322:2: warning: enumeration value ‘GPRS_LLES_ABM’ not handled in switch [-Wswitch]
gprs_llc.c:322:2: warning: enumeration value ‘GPRS_LLES_TIMER_REC’ not handled in switch [-Wswitch]
gprs_llc.c: In function ‘gprs_llc_hdr_rx’:
gprs_llc.c:564:2: warning: enumeration value ‘GPRS_LLC_NULL’ not handled in switch [-Wswitch]
switch (gph->cmd) {
^
gprs_llc.c:564:2: warning: enumeration value ‘GPRS_LLC_RR’ not handled in switch [-Wswitch]
gprs_llc.c:564:2: warning: enumeration value ‘GPRS_LLC_ACK’ not handled in switch [-Wswitch]
gprs_llc.c:564:2: warning: enumeration value ‘GPRS_LLC_RNR’ not handled in switch [-Wswitch]
gprs_llc.c:564:2: warning: enumeration value ‘GPRS_LLC_SACK’ not handled in switch [-Wswitch]
gprs_llc.c: In function ‘gprs_llc_rcvmsg’:
gprs_llc.c:791:23: warning: unused variable ‘udh’ [-Wunused-variable]
struct bssgp_ud_hdr *udh = (struct bssgp_ud_hdr *) msgb_bssgph(msg);
^
gprs_llc.c: At top level:
gprs_llc.c:311:13: warning: ‘t200_expired’ defined but not used [-Wunused-function]
static void t200_expired(void *data)
^
gprs_llc.c:337:13: warning: ‘t201_expired’ defined but not used [-Wunused-function]
static void t201_expired(void *data)
|
|
CC gprs_sndcp.o
gprs_sndcp.c: In function ‘defrag_input’:
gprs_sndcp.c:188:25: warning: variable ‘scomph’ set but not used [-Wunused-but-set-variable]
struct sndcp_comp_hdr *scomph = NULL;
^
gprs_sndcp.c: In function ‘sndcp_llunitdata_ind’:
gprs_sndcp.c:512:11: warning: variable ‘npdu_num’ set but not used [-Wunused-but-set-variable]
uint16_t npdu_num;
^
gprs_sndcp.c: At top level:
gprs_sndcp.c:565:12: warning: ‘sndcp_ll_reset_ind’ defined but not used [-Wunused-function]
static int sndcp_ll_reset_ind(struct gprs_sndcp_entity *se)
^
gprs_sndcp.c:573:12: warning: ‘sndcp_ll_status_ind’ defined but not used [-Wunused-function]
static int sndcp_ll_status_ind()
^
|
|
CC gprs_gmm.o
gprs_gmm.c: In function ‘gsm48_tx_gmm_att_ack’:
gprs_gmm.c:350:11: warning: unused variable ‘ptsig’ [-Wunused-variable]
uint8_t *ptsig, *mid;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_auth_ciph_resp’:
gprs_gmm.c:524:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_att_req’:
gprs_gmm.c:703:9: warning: implicit declaration of function ‘sgsn_acl_lookup’ [-Wimplicit-function-declaration]
!sgsn_acl_lookup(mi_string))) {
^
gprs_gmm.c:632:40: warning: variable ‘old_ra_info’ set but not used [-Wunused-but-set-variable]
uint8_t *cur = gh->data, *msnc, *mi, *old_ra_info, *ms_ra_acc_cap;
^
gprs_gmm.c: In function ‘gsm48_rx_gmm_ra_upd_req’:
gprs_gmm.c:915:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
int rc;
^
gprs_gmm.c:910:11: warning: variable ‘ms_ra_acc_cap’ set but not used [-Wunused-but-set-variable]
uint8_t *ms_ra_acc_cap;
^
gprs_gmm.c: At top level:
gprs_gmm.c:458:12: warning: ‘gsm48_tx_gmm_auth_ciph_req’ defined but not used [-Wunused-function]
static int gsm48_tx_gmm_auth_ciph_req(struct sgsn_mm_ctx *mm, uint8_t *rand,
^
gprs_gmm.c:501:12: warning: ‘gsm48_tx_gmm_auth_ciph_rej’ defined but not used [-Wunused-function]
static int gsm48_tx_gmm_auth_ciph_rej(struct sgsn_mm_ctx *mm)
^
gprs_gmm.c:1169:13: warning: ‘msgb_put_pdp_addr_ipv4’ defined but not used [-Wunused-function]
static void msgb_put_pdp_addr_ipv4(struct msgb *msg, uint32_t ipaddr)
^
gprs_gmm.c:1180:13: warning: ‘msgb_put_pdp_addr_ppp’ defined but not used [-Wunused-function]
static void msgb_put_pdp_addr_ppp(struct msgb *msg)
|
|
Given that the method is only called for a traffic channels the
missing breaks didn't hurt.
Fixes: Coverity CID 1040731, CID 1040732, CID 1040733,
CID 1040734
|
|
.v is a unsigned char array with up-to 255 elements. We do not
need to add a null check here.
Fixes: Coverity CID 1040719
|
|
Fixes: Coverity CID 1040717
|
|
Fixes: Coverity CID 1040716
|
|
In case ftell -1 will be returned. Coverity complained that the
pos we pass to fseek might be negative. In case the ftell fails
we are at the last line for sure.
Fixes: Coverity CID 1040721
|
|
Coverity complains about checking connection->cfg in
bsc_close_connection() at one place but not at the second.
This patch fixes this by adding a check before accessing cfg when
generating the 'partial message' log message.
Fixes: Coverity CID 1195180
Sponsored-by: On-Waves ehf
|
|
The log message lacked a lot of context. A SCCP connection is
created on behalf of a configured BSC. This way we should be
able to always list this information.
|
|
The old ipa_msg_recv() implementation didn't support partial receive,
so IPA connections got disconnected when this happened.
This patch adds the handling of the temporary message buffers and uses
ipa_msg_recv_buffered().
It has been successfully tested by jerlbeck with osmo-nitb and
osmo-bsc.
Ticket: OW#768
Sponsored-by: On-Waves ehf
|
|
In case the max_power_reduction changes, issue a new Set Radio
Carrier Attributes command. OML 12.21 allows to not include the
ARFCN list and the semantic I picked/understand is that a partial
update is possible.
Fixes: SYS#267
|
|
Add the control interface with no hierachy right now and implement
the first command to list IMSI + Context Address of active sessions.
sgsn_cmd_handle could share more code with bsc variant.
Fixes: SYS#264, SYS#265
|
|
For GPRS the look-up via bts/trx does not make any sense and would
introduce bad depdencies for the SGSN. Move the look-up code to a
new file and introduce new setup methods.
|
|
This is only useful for small networks. List the IMSI and MSISDN
of all active subscribers.
Fixes: SYS#266
|
|
Sadly there is no proper foreign key relationship on the tables
that related to the Subscriber. This means we can't use a DELETE
with Cascade and need to delete everything by hand. To make things
worse maybe the SMS/Paging code is still using the subscriber
making the operation more dangerous. I had added NULL checks for
sender_id/receiver_id at 30C3 so we should not crash in this
situation.
Fixes: SYS#274
|
|
The test has been manually verified. Executing the select for
the subscribers showed:
sqlite> select * from Subscriber;
1|2014-03-23 12:12:46|2014-03-23 12:19:09|2620345||445567|1||0|
This created a subscriber with the right IMSI, MSISDN and has
it authorized.
Fixes: SYS#275
|
|
In case the BTS is connected the new attribute should be set
through OML. This is left as a todo item.
Addresses: SYS#267
|
|
|
|
Rename method mncc_rcv_tchf() to mncc_rcv_data(), because the check applies
to all types of data frames, not only TCH/F data.
|
|
The new definitions are: half rate and AMR
Change of definition name for bad frame, because it applies to all types of
traffic, not only TCH/F.
Increase MNCC interface version to 4. Version 3 is skipped, because it was
used by older version of Linux-Call-Router which is incompatible with the
current version of the MNCC interface.
|
|
|
|
Rename gsm340_gen_tpdu() to gsm340_gen_sms_deliver_tpdu() to
show that it generates SMS-DELIVER TPDU and is not a generic function.
|
|
In MT-SMS the message is being delivered. Make the naming follow
that. The schema still refers to "sent" while it should be "delivered"
too.
|
