Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
libosmo-sccp function osmo_ss7_vty_init_sg() now requires a talloc
context as parameter.
Note: It should not _asp() rather then _sg(). However, we can not
switch now, because then we will miss the vtx commands that
configure the default route. Since the default route is the only
valid route for application server processes, we need to fix this
in the simple client, so that this command is no longer needed,
when configuring the as. Also the VTX write functions of
libosmo-sccp need to be fixed first.
|
|
Add VTY commands to configure the sccp-address of the BSC
and the one of the MSC.
|
|
Change-Id: Ib065533273acfabec9d9d4380dcbd6cf16744343
|
|
Move osmo_sccp_simple_client() setup out of iu_init() and a_init().
In msc_main.c and sgsn_main.c, initialize the STP connection first and then
pass to iu_init() and a_init().
This allows serving 3G (IuCS) and 2G (A) from one and the same MSC instance.
Since both OsmoHNBGW and OsmoBSC are using PC 23 by default now, move BSC to PC
42 (because OsmoBSC typically has vty port 4242, bla).
Also:
a_iface.c: remove now unused defines
a_init(): remove osmo_ss7_init() call that duplicated msc_main.c
Change-Id: Ib1fb13ea756655f7e9d43636d497a54e6ae9c032
|
|
|
|
osmo_talloc_replace_string() was introducd into libosmocore in 2014, see
commit f3c7e85d05f7b2b7bf093162b776f71b2bc6420d
There's no reason for us to re-implement this as bsc_replace_string
here.
Change-Id: I6d2fcaabbc74730f6f491a2b2d5c784ccafc6602
|
|
With the OsmoMSC program coming up, the name osmo_msc_data becomes even
more confusing than it already is. Clearly indicate it as libbsc's data of
a remote MSC by prefixing with bsc_.
Also, the Osmocom community has in the meantime agreed to have the osmo_
prefix only in libosmocore, to avoid naming conflicts in case things are
moved there. So while renaming anyway, also drop the osmo_ prefix.
Change-Id: I0dfbcb7d1a579211180f71319982820d8700afab
|
|
With the OsmoMSC program coming up, the name osmo_msc_data becomes even
more confusing than it already is. Clearly indicate it as libbsc's data of
a remote MSC by prefixing with bsc_.
Also, the Osmocom community has in the meantime agreed to have the osmo_
prefix only in libosmocore, to avoid naming conflicts in case things are
moved there. So while renaming anyway, also drop the osmo_ prefix.
Change-Id: I13554563ce9289de126ba0d4cf329bafcda35607
|
|
Since ce9fec3e896571835ac5bfd2980d6836f2b29f0d libosmocore ignores
parameters to log_vty_command_* functions. Hence parameter of
logging_vty_add_cmds() is ignored too. As we depend on much later
libosmocore version anyway, we can simplify code somewhat by removing
parameters which will be ignored anyway.
Change-Id: I62f752fd88f1d8fefa563648f9864c7c31f87991
|
|
Now that bsc_network_alloc() is separate, move it to before the VTY init (a
subsequent patch will pass the gsm_network instance as a parameter to
vty_init()).
bsc_hack.c: drop the comment that says about the VTY init: "This needs to
precede handle_options()" -- it is not accurate. Actually move the
handle_options() above both vty_init() and the bsc_network_alloc() calls, to be
able to decide which mncc callback to pass to bsc_network_alloc. It would make
sense to set this later on, but that would require further refactoring of the
bsc_network_init() and gsm_network_init() signatures, so not in this patch.
Change-Id: Ie6a7037e703b5a2d08ceeb20d35f197aaddc9d1b
|
|
For patch clarity, keep some code dup to be removed in a subsequent patch. In
the same sense don't change the fact that mncc_sock_init()'s return value is
ignored.
The global gsm_network instance 'bsc_gsmnet' is basically only used by the VTY,
and a future patch will "hide" that global in a vty .c file. In a nutshell, I
want to
- first allocate a gsm_network,
- then initialize the VTY passing the gsm_network pointer,
- and then read the config file using the initialized VTY.
So far, bsc_bootstrap_network() allocates the gsm_network and reads the config
file right away, which only works by sharing the extern bsc_gsmnet pointer,
which I would like to uncouple.
Change-Id: I480a09a31a79766ad07b627dd5238b7e37f3be7a
|
|
Add msgb_talloc_ctx_init() call to many main() functions still lacking a
msgb talloc context.
Change-Id: Ib0d6751260659cabf18a7ce80680ba2fb4228ea1
|
|
After libosmocore 38d232ee5d2ceb045d9ad6d3a23afcb4972523f7 which outputs
'CTRL at <ip> <port>' from ctrl_interface_setup_dynip(), there's no need to log
the CTRL bind here anymore.
Change-Id: I1a874efe365a1ecf8ec37b058215b95b9a635ec2
|
|
Add an explicit gsm_network pointer instead of using the bsc_gsmnet global.
This allows passing a gsm_network struct from the main() scope, which helps to
decouple libmsc from libbsc.
Change-Id: I9e2c0d9c18d4cebb5efb71565ad84df2bc2e0251
|
|
Add ctrl_vty_init() calls and feed the ctrl_vty_get_bind_addr() return value to
ctrl_interface_setup() in the following programs:
osmo-bsc
osmo-bsc_nat
osmo-nitb
osmo-sgsn
For osmo-sgsn, move the control interface setup invocation below the config
parsing, so that the ctrl_vty_get_bind_addr() can return the configured
address.
|
|
|
|
This commit initialises and enables the stats subsystem for the given
binaries.
Sponsored-by: On-Waves ehf
|
|
clang complained that different enums are mixed with the
return type and we actually want this to be an int now.
|
|
|
|
It is a bit arbitary to decide which one is the global
and which one is the local one. We might change it around.
I don't think we want to introduce it based on BTS.
|
|
.. as defined in libosmocore
|
|
|
|
Fixes: Coverity CID 1206578
|
|
For GPRS the look-up via bts/trx does not make any sense and would
introduce bad depdencies for the SGSN. Move the look-up code to a
new file and introduce new setup methods.
|
|
The interface can be accessed through CTRL and a socket. But currently
it is only available when the socket interface has been configured.
Create the interface all the time but only listen on the socket when
a path has been specified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
nat: Catch up with controlif_setup API change
We now save a control handle reference in the nat
osmo-bsc: Catch up with controlif_setup API change
We now save a control handle reference in the gsm network
|
|
We now have a list of MSCs but in the code we will
try to access the MSC with the nr 0.
|
|
|
|
We want to have multiple MSCs but we also have some data
that is only present on a per BSC basis. Right now the
MSC data is not allocated with talloc, so we have some
change in the talloc contexts.
|
|
osmo_bsc_main.c: In function ‘main’:
osmo_bsc_main.c:398:2: warning: implicit declaration of function ‘bts_init’ [-Wimplicit-function-declaration]
osmo_bsc_main.c:399:2: warning: implicit declaration of function ‘libosmo_abis_init’ [-Wimplicit-function-declaration]
osmo_bsc_main.c:418:2: warning: implicit declaration of function ‘bsc_bootstrap_network’ [-Wimplicit-function-declaration]
|
|
|
|
This is a big patch that ports openBSC over libosmo-abis.
Sorry, the changes that are included here are all dependent
of libosmo-abis, splitting them into smaller pieces would
leave the repository in some intermediate state, which is
not desired.
The main changes are:
- The directory libabis/ has been removed as it now lives in
libosmo-abis.
- new configuration file format for nanoBTS and HSL femto, we
need to define the virtual e1_line and attach it to the OML
link.
- all the existing BTS drivers (nanoBTS, hsl femto, Nokia site,
BS11 and rbs2000) now use the new libosmo-abis framework.
- use r232 input driver available in libosmo-abis for bs11_config.
- use ipa_msg_recv instead of old ipaccess_read_msg function.
- delete definition of gsm_e1_subslot and input_signal_data.
These structures now lives in libosmo-abis.
Most of this patch are deletions of libabis/ which has been
moved to libosmo-abis.
This patch also modifies openBSC to use all the new definitions
available in libosmocore and libosmo-abis. In order to do that,
we have replaced the following:
- DINP, DMI, DMIB and DMUX by their respective DL* correspondences.
- SS_GLOBAL by SS_L_GLOBAL
- SS_INPUT by SS_L_INPUT
- S_GLOBAL_SHUTDOWN by S_L_GLOBAL_SHUTDOWN
- SS_INPUT by SS_L_INPUT
- S_INP_* by S_L_INP_* sub-signals
- E1INP_NODE by L_E1INP_NODE vty node
This patch has been tested with:
- one nanoBTS
- the HSL femto with the examples available under libosmo-abis
- BS11 with both dahdi and misdn drivers.
|
|
|
|
|
|
|
|
|
|
|
|
We had the rf_ctrl_name and the rf_ctl pointer, make both use
the word ctrl.
|
|
The osmo_daemonize moved from process.h to application.h (that
is already included), remove the process.h include.
|
|
this avoids us to copy+paste external declarations over all 'main'
files.
|
|
This was required due to master diverging from where controlif
had last branched off.
|
|
* net.location to get/set the geographical location of the network
format is <tstamp>,<lat>,<lon>,<height>
* per trx rf_locked command (net.bts0.trx0.rf_locked)
* network-wide rf_locked command (net.rf_locked)
|
|
This patch initializes libctrl to listen for connections on port 4249.
Additionally, control messages arriving from the nat will also be
processed.
|