| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
A CM service request must be acknowledged also, when encryption is already
enabled.
Without encryption enabled, the security status is GSM_SECURITY_NOTAVAIL,
which causes a CM service acknowledge. On initial CM service request, the
security status is GSM_SECURITY_SUCCEED, if encryption is enabled. This
will not lead to an acknowledge, because the cyphering command implies an
acknowlege. An additional CM service request requires an acknowledge, so
I added a new security status: GSM_SECURITY_ALREADY
|
|
Coverity pointed out that we use trans->subscr after a NULL check,
it is our believe that every transaction will have a subscriber.
Remove the check and add an assert before we are dispatching things.
Fixes: Coverity CID 1040740, CID 1040739
|
|
"subscriber " SUBSCR_TYPES " ID sms pending-send
could fail with an invalid ID/IMSI for the subscriber.
Fixes: Coverity CID 1040715
|
|
We want to memset the entire area of the atuple and not just the
first four/eight bytes of the data.
Fixes: Coverity CID 1040708
|
|
This fixes both a GCC and a Coverity warning:
GCC:
gsm_subscriber.c: In function ‘subscr_expire_callback’:
gsm_subscriber.c:389:2: warning: format ‘%i’ expects argument of type ‘int’, but argument 8 has type ‘long long unsigned int’ [-Wformat]
Coverity:
CID 1040712
|
|
system_id is a char array, which makes the NULL check a tautology,
so we should check with strlen if the string is empty or not.
This is fixing the "write" command of VTY that would otherwise
create a config file that can not be parsed.
|
|
Since automake 1.13 INCLUDES is depricates and causes a warning
|
|
If an ESME has the dcs_transparent config flag, then the TP-DCS
of MO-SMS is transparently passed to SMPP and not converted to SMPP
specific data_coding values.
This is needed in cases where ESMEs actually care about the exact
TP-DCS, as the conversion from TP-DCS to SMPP data_coding is not
bijective.
|
|
There are multiple ways how the TS 03.38 TP-DCS can indicate 8bit or
7bit messages. SMPP has it's own data coding specification, which is
different from TS 03.38.
However, some SMPP ESMEs want to be able to have fine-grained control
over the TP-DCS indicated in the TPDU header. If such values like 0xF6
are used in SMPP, we now transparently pass them on to the GSM side.
|
|
|
|
The smpp_pdu_rx method does not free the msgb. Introduce an
annotation (currently defined to nothing) to indicate what
will happen to a msgb.
|
|
An ESME can now be configured in the VTY to enable osmocom-extensions,
which will add vendor-specific SMPP TLVs for RxLev/RxQual/ARFCN/IMEI and
transmit power to the SMPP DELIVER-SM message type.
|
|
As bsc_gsmnet is NULL at the time we call smpp_openbsc_init(),
we later run into segfaults with subscribers that don't have a
subscr->net set.
However, we cannot delay smpp_openbsc_init() until after
bsc_bootstrap_network(), as we then fail to parse the SMPP specific
VTY/config file options...
|
|
Katerina pointed out that some nodes are not fully documented and
proposed some messages. The token/timeout messages were correct, I
have modified the other messages. I removed the full-stop from the
PING/PONG documentation as we are normally not using a full sentence.
|
|
when the SMS code was moved into libosmocore, its logging prefix was
changed from 'sms' to 'lsms', which breaks existing config files.
This introduces a deprecated/hidden vty command to make sure those
config files are still parsed OK, and will simply print a warning
message about the config needing some update.
|
|
If after release has been sent, the call control layer waits for:
- reception of release complete
- or timeout
- or release of transaction (due to radio link failure)
In this case, an MNCC_REL_CNF is sent to upper layer. The callref must
still exist, so the upper layer can handle this confirm.
|
|
If transaction is destroyed, but callref still exists, the
mncc_release_ind function is called. If the upper layer already sent an
MNCC_REL_REQ, the state N19 was entered. In this case it expects an
MNCC_REL_CNF.
|
|
|
|
... as an empty system-id would render the openbsc.cfg unparseable on
next openbsc start.
|
|
|
|
Work on the 'forward' part.. tell the sms queue that something has been
submitted for it..
Conflicts:
openbsc/src/libmsc/smpp_openbsc.c
|
|
The issue can be reproduced by typing the following 9 or more times.
OpenBSC> subscriber id 2 sms sender id 2 send bla
For some unknown reason the phone sends us a CP-ERROR for a transaction
identifier we have allocated and used but don't remember. Due the way
we use the SMC/SMR we 'establish' the machine and this results in a CP-ACK
being sent out. But the CP-ERROR is not having the content we want for
an establish so we send out a RP-ERROR. This will result in a CP-ERROR
because the phone does not know the transaction...
Avoid the issue by checking the direction of the transaction. If we do
not know the transaction and it is supposed to be allocated by us then
just ignore it and do not create a new transaction.
|
|
Set the subscriber expiry timeout to twice the duration of the location
update period and provide functions subscr_expire() and
db_subscriber_expire() to mark subscribers offline that have missed two
location update periods.
This patch increases the DB revision to 3, so the hlr will be
incompatible with prior versions.
We should allow 0 for T3212 as well to disable the location update
period. In that case we will need a way to indicate that in the
database.
|
|
|
|
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Log messages would get mangled before if we receive detach by TMSI or
IMSI.
|
|
Remove the log messages and comments as they are wrong for now. Even
for the mode modify we will get the assign complete call.
|
|
This was reported by Kevin when he was testing handover. The problem
is the order of the signal handlers for S_ABISIP_CRCX_ACK. Right now
the handover signal handler is called before the one inside the libmsc
gsm_04_08.c. This means S_HANDOVER_ACK is signalled _before_ there is a
rtp socket created for the channel. The result is that the MDCX will
never be sent and the called will not be properly switched _after_ the
handover detection.
I do not want to play with the order of signal handlers, remove the
CRCX ack handling from the handover_logic.c and force the NITB (and
later the BSC) to check if the lchan is involved with a handover and
do the switching in there. This means right now we do what two signal
handlers did in one.
Reproduced and tested with the FakeBTS Handover test.
Log message:
<0004> abis_rsl.c:1954 (bts=1,trx=0,ts=3,ss=0) IPAC_CRCX_ACK ...
<000c> gsm_04_08.c:1400 no RTP socket for new_lchan
<001a> rtp_proxy.c:533 rtp_socket_create(): success
<001a> rtp_proxy.c:615 rtp_socket_bind(rs=0x48703c8, IP=0.0.0.0): ...
|
|
This was requested by Holger Freyther <zecke@selfish.org>.
|
|
|
|
If subscriber A is calling B and has sent a CC Setup message we will
allocate the MO and MT transaction and link them together. When the
BTS or the lchan is failing the BSC API will send a clear request,
as part of the clear request all pending transactions will be released.
As part of taking down the transaction, the remote leg will be informed
and will send a MNCC_REL_REQ. This results in a call to trans_free. The
llist_for_each_entry_safe does not handle removing other elements from
the list and we would segfault.
One way to fix this is to move the transaction list into the subscriber
connection. This might require to create the subscriber connection for
MT handling earlier. Otherwise one could have one transaction list inside
the subscriber connection and a global list for MT- transactions.
|
|
This is a cosmetic change and should happen to find use after free
of the subscriber.
|
|
This has been reported and analyzed by Tobias Engel. The IMSI Detach
is dispatched as part of the complete layer3 message. I had patched
the code to release the anchor and call msc_release_connection to
release the connection as fast as possible (otherwise the anchor would
trigger in a couple of seconds).
With commit 70ae5d3000edd12aee38497a6f541595a8c7dee8 I made this more
generic to release the connection immediately if there are no operations,
no transaction and no silent call. This leads to the subscriber connection
being released twice and eventually causing a segfault. Remove the
msc_release_connection invocation from the IMSI Detach code as the connection
will be taken down by the BSC API.
This has been tested using the FakeBTS and an IMSI Detach message. The
channel is released immediately and the nitb does not crash.
|
|
For GSM (not GPRS) we will never use a SAPI!=3. Simplify the code
and remove the link_id=0.
|
|
Rebased, tested and fixed by Holger Freyther. Release the transaction
only once the SMC is asking for the release and set the cb's to NULL
to catch a use after free early.
|
|
This has been rebased and fixed by Holger Freyther. The change of
the debug area was split out in a previous commit and the is_mt was
put back into the transaction code.
The transaction is now freed from the RELEASE_REQ sent by the SMC
layer and not inside the error path. When clearing the SMC instance
we also clear the callbacks.
|
|
This should and does happen as part of the trans_free/msc_release_connection
code. There is no easy way to determine that the lchan is now 'free' for other
things.. Let the transaction code sort this out. This code just needs to make
sure that transactions are always freed.
|
|
This is more a work around and one still needs to implement a
proper dispatch on the opening of the connection. If there is no
operation left, no transaction and no silent call, close down the
channel.
|
|
|
|
... I would have never believed it is such a broken mindfuck.
|
|
This program binds as ESME transceiver to a SMSC and simply mirrors back
all SMS that it receives.
|
|
Each ESME can have a number of prefix-matching routes, or it can
be a 'default route' to whcih all otherwise unknown SMS destinations
are routed.
|
|
|
|
|
|
Use the code that is shipped inside the libosmogsm library. Right now
the signature (besides the static) and the implementation is the same.
This makes using the libosmogsm SMC code more easy in the near future.
For the gsm340_gen_oa we are now using a small wrapper to generate the
proper type and numbering plan.
|
|
|
|
subscr_get_by_* is already increasing the refcount, we shouldn't
do that a second time (thanks, Holger).
|
|
|
