| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Replace hardcoded protocol discriminator and message type bitmasks with
function calls recently introduced in libosmocore.
Note that the release 98 bitmasks slightly differ from the release 99 bitmasks.
This patch uses the "default" gsm48_hdr_msg_type invocation, thus it depends on
libosmocore whether 98 or 99 bitmasks are used.
In some places, use of the bitmask was erratic. Fix these implicitly by
employing the bitmask functions:
* silent_call.c: silent_call_reroute(): add missing bitmask for MM.
* bsc_msg_filter.c: bsc_msg_filter_initial(): RR vs. MM messages.
* osmo_bsc_filter.c: bsc_find_msc() and bsc_scan_bts_msg(): RR vs. MM
messages.
* bsc_nat_rewrite.c: bsc_nat_rewrite_msg(): SMS vs. CC messages.
* bsc_ussd.c: no bitmask is applicable for the message types used here.
* gb_proxy.c: gbproxy_imsi_acquisition(): missing bit mask for pdisc.
In gprs_gb_parse.c: gprs_gb_parse_dtap(), add a log notice for unexpected
message types.
|
|
Have two separate gsm0480_send_ussdNotify() and gsm0480_send_releaseComplete()
for each of libbsc and libmsc. Move their core into libxsc as generator
functions returning a msgb.
Add src/libbsc/gsm_04_80_utils.c (note, not 04_08) to implement the libbsc
side of it.
The code is identical, but the linked structs and functions differ in each
case. There could be a common source file built for both, but I decided against
it, for more clarity I hope.
|
|
Move some Iu/A members into the MSC #ifdef.
Have separate allocate and free functions for the two scopes.
|
|
libbsc and libmsc have conflicting definitions of gsm_subscriber_connection
and do no longer belong together anyway.
Create libxsc, meaning 'lib[bm]sc', to hold all code used by both libmsc
and libbsc, and make sure gsm_subscriber_connection isn't used there.
In various binaries and tests, do not link libbsc and libmsc.
(Note: this commit was reshaped out of a large wip chunk, it may not
compile properly without the subsequent commits)
|
|
|
|
|
|
|
|
The aim is to allow osmo-cscn to pass its own root talloc context and
global gsm_network struct instance cleanly. This may stir up some old and
dusty globals, but I hope it's for the better, since not all is a BSC.
To ensure that a global gsm_network pointer for the bsc_vty is set, have it as
argument to bsc_vty_init(). The vty configuration commands are added only after
bsc_vty_init(), which are needed to configure the network struct. So split up
the bsc_bootstrap_network() function into bsc_network_init() to allocate a
gsm_struct, and bsc_network_configure() to read the config file once the vty
commands are in place. In this way, no global bsc_gsmnet pointer is needed for
the bsc vty. The atomic super glue is dissolved and osmo-cscn will be allowed
to have a different name for it.
Admitted, it's still called the bsc_vty, but a split thereof is probably coming
soon, because the CSCN doesn't want any of the BSC nor BTS specific vty
commands.
|
|
The diff between this and master will probably need a lot of review and fixes.
The current state does compile, but I expect pretty much everything to be
broken now. Future development will reinstate proper functionality piecemeal.
The first goal is to get basic signalling to work, then SMS. The voice control
(RTP) is completely disabled now (see "#if BEFORE_MSCSPLIT") and will be fixed
last AFAICT.
|
|
|
|
Rename conn_ctx_list -> ue_conn_ctx_list.
Indicate Iu-CS 'siblings' for a couple of functions.
Tweak/add comments.
|
|
|
|
subscr_name() was called from several places:
* either without a check for subscr being NULL, which for example
was causing a segfault if we hand-over a channel before identifying the
subscriber
* or with an explicit NULL check and the ternary operator (?).
We now simplify the code by checking for the NULL Subscriber in subscr_name()
itself.
|
|
Replace the global sub_connections llist with gsm_network.subscr_conns.
Initialize and apply where applicable. Remove bsc_api_sub_connections().
|
|
Add ctrl_vty_init() calls and feed the ctrl_vty_get_bind_addr() return value to
ctrl_interface_setup() in the following programs:
osmo-bsc
osmo-bsc_nat
osmo-nitb
osmo-sgsn
For osmo-sgsn, move the control interface setup invocation below the config
parsing, so that the ctrl_vty_get_bind_addr() can return the configured
address.
|
|
Following the 'line vty'/'bind A.B.C.D' command added in libosmocore, use the
configured address to set the telnet bind for the VTY line. It is now possible
to publish the VTY on a specific local interface (including 0.0.0.0 aka "any").
Implement in all of:
osmo-gbproxy
osmo-gtphub
osmo-sgsn
osmo-bsc
osmo-bsc_nat
osmo-bsc_mgcp
osmo-nitb
In some of these main programs, move the telnet initialization below the
configuration parsing.
Historically, this was not a good idea for programs using bsc_init.c (aka
bsc_bootstrap_network()), since they expected a gsm_network struct pointer in
((struct telnet_connection*)vty->priv)->priv, so that telnet had to be either
initialized or replaced by a dummy struct. In the meantime, the gsm_network
struct is not actually looked up in a priv pointer but in the static bsc_vty.c
scope (bsc_gsmnet), so this limitation is mere legacy (even though said legacy
is still there in an "#if 0" chunk).
In the other binaries I have briefly looked at the init sequence dependencies
and found no reason to initialize telnet above the config file parsing. In any
case, I have tested every single one of abovementioned binaries to verify that
they still parse the example config successfully and launch, allowing VTY
connections on the configured address(es). I hope this suffices.
In all of the above, log VTY address and port. LOGL_INFO is disabled by default
in some of the logging scopes, and since it is a single log message right at
program launch, I decided for the slightly more aggressive LOGL_NOTICE.
|
|
Remove unused talloc.h from bsc_vty.c.
In bsc_nat.c, use OSMO_CTRL_PORT_BSC_NAT instead of hardcoding port number, and
include ctrl/ports.h for that.
Fix comment typo "COMAMND"
|
|
At Rhizomatica we see that some GSM 04.08 messages are leaked and
have no other indication if that is Call Control, SMS or something
else.
|
|
In 'show running-config', timeslot appears as a sub-element of rsl, but it is a
direct child of trx. Fix the timeslot section in vty_out by removing one space
of idention.
Adjust various config examples.
Rationale: it's not relevant for function, but confuses human operators. Fixing
it will save the next hacker some time.
|
|
|
|
|
|
This fixes a bug in the following circumstances:
* BSIC is set to 0 in the config file
* No TSC is explicitly specified at the BST level in the config file
In this case, we ended up using BSIC=0 and TSC=7, as TSC=7 is our
default initialization value.
The TSC of the CCCH/BCCH must always be the BCC, which is the lower 3
bits of the BSIC. Having configuration options for both the BSIC _and_
the TSC at the BTS level therefore makes no sense, as it only adds ways
in which users can configure non-oprational configurations. So we
remove the bts->tsc member, and keep only the ts->tsc members that allow
us to configure a timeslot-specific TSC that's different from the BTS
TSC (= BCC).
|
|
This commit initialises and enables the stats subsystem for the given
binaries.
Sponsored-by: On-Waves ehf
|
|
The signature of mr_config and the BSC implementation didn't
match and the compiler was warning about it:
osmo_bsc_api.c:530:2: warning: initialization from incompatible pointer type
.mr_config = bsc_mr_config,
^
osmo_bsc_api.c:530:2: warning: (near initialization for ‘bsc_handler.mr_config’)
Change the mr_config again and provide an implementation
that will set the ms and bts data structure. It would be
better to put the size outside of the IE but I am not going
to change it right now. It would also be nice to either move
the AMR setting into the "nitb" structure or have the msc
data be used _after_ the bts settings. This needs to be
cleaned up in the next step.
Manually verified by placing a MO call and checking that
both the channel mode modify and the mode modify request
contain the multi rate config with the rate mr config
(length two bytes, version 1, icmi==1, no start mode being
set).
|
|
|
|
This way a lot of if/else can just be killed by the caller deciding
which of the two instances to use.
I have copied both branches to new files, replace bts for ms in one
of them and ran diff on it. There is no difference.
|
|
Merge two copies into a local static helper function. The format
of the message will change and then it is easier to modify it in
one place than in two.
Sadly the original patch was merged before this clean-up so do
the clean-up as second step.
Conflicts:
openbsc/src/libbsc/abis_rsl.c
openbsc/src/libbsc/gsm_04_08_utils.c
|
|
|
|
|
|
In the 1900 MHz PCS band, we always generated neighbor cell lists
consisting of only a single neighbor cell, rather than al the
configured BTSs.
|
|
The same radio link timeout value is used for BTS and MS side.
|
|
|
|
As the comment says we should not rely that the paging
occurs on the current LAC. We might page at more BTS.
Walk all the BTS to stop paging. No callbacks will be
issued by this stop operation.
|
|
In case we can't page on a BTS then stop it everywhere. The
callers of paging_request assume that this is kind of an
atomic operation and we should help with that.
|
|
Check if the NAT has sent 16 bytes of RAND and if a key
has been configured in the system and then generate a
result using milenage. The milenage res will be sent and
noth the four byte GSM SRES derivation.
|
|
Unfortunately the basic structure of the response is broken.
There is a two byte length followed by data. The concept of
a 'tag' happens to be the first byte of the data.
This means we want to write strlen of the token, then we
want to write the NUL and then we need to account for the
tag in front.
Introduce a flag if the new or old format should be used.
This will allow to have new BSCs talk to old NATs without
an additional change. In the long run we can clean that up.
|
|
Remove the condition because it can never be true.
Fixes: Coverity CID#1307793
|
|
Allow ARFCN 0 to be used in GSM900 band.
|
|
The code to do that doesn't belong to the control interface, so
abstract it out to a separate function gsm_bts_set_system_infos().
[hfreyther: Fix the coding style...]
|
|
The dispatching might lead to the removal of more
paging requests and makes "request" invalid. Remove
it before calling the callback.
|
|
We had issues with odd behavior on the nanoBTS which lead
to the introduction of the "broken" state. On busy multi
BTS cells (e.g. rhizomatica) with wifi backhaul the timeout
we set to wait for a RF Channe Release ACK is sometimes too
little and channels are marked broken that look to be okay
(besides the still to be determined delay).
In case of a sysmoBTS we now know that we can change the
state of a broken channel back to normal in case we do
receive the right response.
Manually verified using the Smalltalk BTS code
PackageLoader fileInPackage: 'FakeBTS'
bts := FakeBTS.BTS new.
bts btsId: '1903/0/0'.
bts connect: 'localhost'.
bts waitForBTSReady.
test := FakeBTS.OpenBSCTest new.
test bts: bts.
test requireAnyChannel
... wait for NITB output
<0004> abis_rsl.c:223 (bts=0,trx=0,ts=0,ss=0) Timeout during deactivation! Marked as broken.
... process pending messages
stdin next
<0004> abis_rsl.c:735 (bts=0,trx=0,ts=0,ss=0) CHAN REL ACK for broken channel. Releasing it.
So the channel went from broken to unallocated.
|
|
Create a one stop command to give a statement for the
entire network. This can be used to check the policy
and the state of the entire network.
|
|
This can be used to query how many bts are configured to
check if all of them are locked or not.
|
|
The bts.0.rf-state and rf_locked command have been moved
from the osmo-bsc binary to libbsc. All tests continue to
pass.
|
|
|
|
Create a control command to read and modify the gprs mode. Use
the get_string_value to indicate if the value was found or not.
This is useful for the ctrl interface where I didn't want to
replicate "none", "gprs" and "egprs". Share code to verify that
a BTS supports the mode.
Related: SYS#591
|
|
30f1f376383df3ae8d85e96542bf14d174c25d89 introduced new channel
combinations but had a copy and paste error in the description.
The jenkins system didn't run the external tests so this issue
and others were not noticed until now.
Fix the copy and paste and update the test result.
|
|
The code has been unused for a long time. Let's remove it.
|
|
|
|
|
