aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorNeels Hofmeyr <nhofmeyr@sysmocom.de>2015-11-18 17:09:22 +0100
committerNeels Hofmeyr <nhofmeyr@sysmocom.de>2015-11-30 11:30:36 +0100
commite5e78c21bb6e63a1fd1d2e62c042ecce867c2efc (patch)
tree3a8b36df6acc75b8f9c0408e77089c20b2c35ec1
parentff252bb80172826391b6286fd240266fe842cc83 (diff)
gtphub: add to debian build
By the example of osmo-sgsn, package osmo-gtphub for debian. Sponsored-by: On-Waves ehi
-rw-r--r--debian/control14
-rw-r--r--debian/osmo-gtphub.default2
-rw-r--r--debian/osmo-gtphub.examples1
-rwxr-xr-xdebian/osmo-gtphub.init150
-rw-r--r--debian/osmo-gtphub.install1
-rwxr-xr-xdebian/rules1
-rw-r--r--openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg23
7 files changed, 192 insertions, 0 deletions
diff --git a/debian/control b/debian/control
index 2447d2928..c37a5caf9 100644
--- a/debian/control
+++ b/debian/control
@@ -50,6 +50,12 @@ Depends: ${shlibs:Depends}, ${misc:Depends}
Description: Osmocom Base Station Controller Network Address Translation
Network address translation for BSC.
+Package: osmo-gtphub
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Description: Osmocom GTP Hub
+ Proxy for comms between multiple SGSNs and GGSNs.
+
Package: osmocom-bsc-dbg
Architecture: any
Section: debug
@@ -105,3 +111,11 @@ Priority: extra
Depends: osmocom-bsc-nat (= ${binary:Version}), ${misc:Depends}
Description: Debug symbols for the OpenBSC Network Address Translation
Make debugging possible
+
+Package: osmo-gtphub-dbg
+Architecture: any
+Section: debug
+Priority: extra
+Depends: osmo-gtphub (= ${binary:Version}), ${misc:Depends}
+Description: Debug symbols for Osmocom GTP Hub
+ Make debugging possible
diff --git a/debian/osmo-gtphub.default b/debian/osmo-gtphub.default
new file mode 100644
index 000000000..6af82da39
--- /dev/null
+++ b/debian/osmo-gtphub.default
@@ -0,0 +1,2 @@
+CONFIG_FILE="/etc/osmocom/osmo-gtphub.cfg"
+
diff --git a/debian/osmo-gtphub.examples b/debian/osmo-gtphub.examples
new file mode 100644
index 000000000..48c2dc028
--- /dev/null
+++ b/debian/osmo-gtphub.examples
@@ -0,0 +1 @@
+openbsc/doc/examples/osmo-gtphub
diff --git a/debian/osmo-gtphub.init b/debian/osmo-gtphub.init
new file mode 100755
index 000000000..160d55b70
--- /dev/null
+++ b/debian/osmo-gtphub.init
@@ -0,0 +1,150 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides: osmo-gtphub
+# Required-Start: $network $local_fs
+# Required-Stop:
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+# Short-Description: Osmocom GTP hub
+# Description: Osmocom GTP hub
+### END INIT INFO
+
+# Author: Neels Hofmeyr <nhofmeyr@sysmocom.de>
+
+# PATH should only include /usr/* if it runs after the mountnfs.sh script
+PATH=/sbin:/usr/sbin:/bin:/usr/bin
+NAME=osmo-gtphub # Introduce the short server's name here
+DESC="Osmocom GTP hub" # Introduce a short description here
+DAEMON=/usr/bin/osmo-gtphub # Introduce the server's location here
+SCRIPTNAME=/etc/init.d/osmo-gtphub
+
+# Exit if the package is not installed
+[ -x $DAEMON ] || exit 0
+
+# Read configuration variable file if it is present
+[ -r /etc/default/osmo-gtphub ] && . /etc/default/osmo-gtphub
+
+# Load the VERBOSE setting and other rcS variables
+. /lib/init/vars.sh
+
+# Define LSB log_* functions.
+# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
+. /lib/lsb/init-functions
+
+DAEMON_ARGS="$DAEMON_ARGS -D -c $CONFIG_FILE"
+
+#
+# Function that starts the daemon/service
+#
+do_start()
+{
+ # Return
+ # 0 if daemon has been started
+ # 1 if daemon was already running
+ # 2 if daemon could not be started
+ start-stop-daemon --start --quiet --exec $DAEMON --test > /dev/null \
+ || return 1
+ start-stop-daemon --start --quiet --exec $DAEMON -- \
+ $DAEMON_ARGS \
+ || return 2
+ # Add code here, if necessary, that waits for the process to be ready
+ # to handle requests from services started subsequently which depend
+ # on this one. As a last resort, sleep for some time.
+}
+
+#
+# Function that stops the daemon/service
+#
+do_stop()
+{
+ # Return
+ # 0 if daemon has been stopped
+ # 1 if daemon was already stopped
+ # 2 if daemon could not be stopped
+ # other if a failure occurred
+ start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --name $NAME
+ RETVAL="$?"
+ [ "$RETVAL" = 2 ] && return 2
+ # Wait for children to finish too if this is a daemon that forks
+ # and if the daemon is only ever run from this initscript.
+ # If the above conditions are not satisfied then add some other code
+ # that waits for the process to drop all resources that could be
+ # needed by services started subsequently. A last resort is to
+ # sleep for some time.
+ start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+ [ "$?" = 2 ] && return 2
+ return "$RETVAL"
+}
+
+#
+# Function that sends a SIGHUP to the daemon/service
+#
+do_reload() {
+ #
+ # If the daemon can reload its configuration without
+ # restarting (for example, when it is sent a SIGHUP),
+ # then implement that here.
+ #
+ start-stop-daemon --stop --signal 1 --quiet $PIDFILE --name $NAME
+ return 0
+}
+
+case "$1" in
+ start)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
+ do_start
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ stop)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ status)
+ status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
+ ;;
+ #reload|force-reload)
+ #
+ # If do_reload() is not implemented then leave this commented out
+ # and leave 'force-reload' as an alias for 'restart'.
+ #
+ #log_daemon_msg "Reloading $DESC" "$NAME"
+ #do_reload
+ #log_end_msg $?
+ #;;
+ restart|force-reload)
+ #
+ # If the "reload" option is implemented then remove the
+ # 'force-reload' alias
+ #
+ log_daemon_msg "Restarting $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1)
+ do_start
+ case "$?" in
+ 0) log_end_msg 0 ;;
+ 1) log_end_msg 1 ;; # Old process is still running
+ *) log_end_msg 1 ;; # Failed to start
+ esac
+ ;;
+ *)
+ # Failed to stop
+ log_end_msg 1
+ ;;
+ esac
+ ;;
+ *)
+ #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+ echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
+ exit 3
+ ;;
+esac
+
+:
diff --git a/debian/osmo-gtphub.install b/debian/osmo-gtphub.install
new file mode 100644
index 000000000..908c1a5eb
--- /dev/null
+++ b/debian/osmo-gtphub.install
@@ -0,0 +1 @@
+/usr/bin/osmo-gtphub
diff --git a/debian/rules b/debian/rules
index 8047b7942..ee632a2b9 100755
--- a/debian/rules
+++ b/debian/rules
@@ -34,6 +34,7 @@ override_dh_strip:
dh_strip -posmocom-sgsn --dbg-package=osmocom-sgsn-dbg
dh_strip -posmocom-gbproxy --dbg-package=osmocom-gbproxy-dbg
dh_strip -posmocom-bsc-nat --dbg-package=osmocom-bsc-nat-dbg
+ dh_strip -posmo-gtphub --dbg-package=osmo-gtphub-dbg
override_dh_auto_configure:
echo $(VERSION) > openbsc/.tarball-version
diff --git a/openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg b/openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg
new file mode 100644
index 000000000..c9bb4cf42
--- /dev/null
+++ b/openbsc/doc/examples/osmo-gtphub/osmo-gtphub.cfg
@@ -0,0 +1,23 @@
+!
+! Osmocom gtphub configuration
+!
+
+line vty
+ no login
+
+gtphub
+ ! Local addresses to listen on and send from, each on standard ports
+ ! 2123 and 2152. Setting these addresses is mandatory.
+ bind-to-sgsns 127.0.0.1
+ bind-to-ggsns 127.0.0.2
+
+ ! Local nonstandard ports or separate IPs:
+ !bind-to-sgsns ctrl 127.0.0.1 2342 user 127.0.0.1 4223
+
+ ! Proxy: unconditionally direct all traffic to...
+ !ggsn-proxy 127.0.0.3
+ !sgsn-proxy 127.0.0.4
+
+ ! Proxy with nonstandard ports or separate IPs:
+ !ggsn-proxy ctrl 127.0.0.3 2123 user 127.0.0.5 2152
+