[vty] Allow to set the RACH NM attributes on a per BTS basis

Be able to tune the RACH settings of the BTS via the vty interface,
by default they are initialized to -1 which means we will use the
content of the static array (BTS default) and can be changed via
the VTY interface. I have verified the setting on the nanoBTS with
wireshark and I have tested writing the config file.

4 files changed, 51 insertions, 0 deletions

diff --git a/openbsc/include/openbsc/gsm_data.h b/openbsc/include/openbsc/gsm_data.h
index 649aff436..5fd5ccd3b 100644
--- a/openbsc/include/openbsc/gsm_data.h
+++ b/openbsc/include/openbsc/gsm_data.h
@@ -525,6 +525,10 @@ struct gsm_bts {
 		struct gsm_bts_gprs_nsvc nsvc[2];
 		u_int8_t rac;
 	} gprs;
+
+	/* RACH NM values */
+	int rach_b_thresh;
+	int rach_ldavg_slots;
 	
 	/* transceivers */
 	int num_trx;
diff --git a/openbsc/src/bsc_init.c b/openbsc/src/bsc_init.c
index 44c4d319a..1a969187c 100644
--- a/openbsc/src/bsc_init.c
+++ b/openbsc/src/bsc_init.c
@@ -855,6 +855,22 @@ static void patch_nm_tables(struct gsm_bts *bts)
 	bs11_attr_radio[2] |= arfcn_high;
 	bs11_attr_radio[3] = arfcn_low;
 
+	/* patch the RACH attributes */
+	if (bts->rach_b_thresh != -1) {
+		nanobts_attr_bts[33] = bts->rach_b_thresh & 0xff;
+		bs11_attr_bts[33] = bts->rach_b_thresh & 0xff;
+	}
+
+	if (bts->rach_ldavg_slots != -1) {
+		u_int8_t avg_high = bts->rach_ldavg_slots & 0xff;
+		u_int8_t avg_low = (bts->rach_ldavg_slots >> 8) & 0x0f;
+
+		nanobts_attr_bts[35] = avg_high;
+		nanobts_attr_bts[36] = avg_low;
+		bs11_attr_bts[35] = avg_high;
+		bs11_attr_bts[36] = avg_low;
+	}
+
 	/* patch BSIC */
 	bs11_attr_bts[1] = bts->bsic;
 	nanobts_attr_bts[sizeof(nanobts_attr_bts)-11] = bts->bsic;
diff --git a/openbsc/src/gsm_data.c b/openbsc/src/gsm_data.c
index 99328aba0..a473adef9 100644
--- a/openbsc/src/gsm_data.c
+++ b/openbsc/src/gsm_data.c
@@ -223,6 +223,8 @@ struct gsm_bts *gsm_bts_alloc(struct gsm_network *net, enum gsm_bts_type type,
 	bts->c0->ts[0].pchan = GSM_PCHAN_CCCH_SDCCH4;
 
 	bts->paging.free_chans_need = -1;
+	bts->rach_b_thresh = -1;
+	bts->rach_ldavg_slots = -1;
 
 	llist_add_tail(&bts->list, &net->bts_list);
 
diff --git a/openbsc/src/vty_interface.c b/openbsc/src/vty_interface.c
index 201c30e48..662f7cc3e 100644
--- a/openbsc/src/vty_interface.c
+++ b/openbsc/src/vty_interface.c
@@ -350,6 +350,13 @@ static void config_write_bts_single(struct vty *vty, struct gsm_bts *bts)
 	vty_out(vty, "  rach max transmission %u%s",
 		rach_max_trans_raw2val(bts->si_common.rach_control.max_trans),
 		VTY_NEWLINE);
+
+	if (bts->rach_b_thresh != -1)
+		vty_out(vty, "  rach nm busy threshold %u%s",
+			bts->rach_b_thresh, VTY_NEWLINE);
+	if (bts->rach_ldavg_slots != -1)
+		vty_out(vty, "  rach nm load average %u%s",
+			bts->rach_ldavg_slots, VTY_NEWLINE);
 	if (bts->si_common.rach_control.cell_bar)
 		vty_out(vty, "  cell barred 1%s", VTY_NEWLINE);
 	if (is_ipaccess_bts(bts)) {
@@ -1604,6 +1611,26 @@ DEFUN(cfg_bts_rach_max_trans,
 	return CMD_SUCCESS;
 }
 
+DEFUN(cfg_bts_rach_nm_b_thresh,
+      cfg_bts_rach_nm_b_thresh_cmd,
+      "rach nm busy threshold <0-255>",
+      "Set the NM Busy Threshold in DB")
+{
+	struct gsm_bts *bts = vty->index;
+	bts->rach_b_thresh = atoi(argv[0]);
+	return CMD_SUCCESS;
+}
+
+DEFUN(cfg_bts_rach_nm_ldavg,
+      cfg_bts_rach_nm_ldavg_cmd,
+      "rach nm load average <0-65535>",
+      "Set the NM Loadaver Slots value")
+{
+	struct gsm_bts *bts = vty->index;
+	bts->rach_ldavg_slots = atoi(argv[0]);
+	return CMD_SUCCESS;
+}
+
 DEFUN(cfg_bts_cell_barred, cfg_bts_cell_barred_cmd,
       "cell barred (0|1)",
       "Should this cell be barred from access?")
@@ -2060,6 +2087,8 @@ int bsc_vty_init(struct gsm_network *net)
 	install_element(BTS_NODE, &cfg_bts_challoc_cmd);
 	install_element(BTS_NODE, &cfg_bts_rach_tx_integer_cmd);
 	install_element(BTS_NODE, &cfg_bts_rach_max_trans_cmd);
+	install_element(BTS_NODE, &cfg_bts_rach_nm_b_thresh_cmd);
+	install_element(BTS_NODE, &cfg_bts_rach_nm_ldavg_cmd);
 	install_element(BTS_NODE, &cfg_bts_cell_barred_cmd);
 	install_element(BTS_NODE, &cfg_bts_ms_max_power_cmd);
 	install_element(BTS_NODE, &cfg_bts_per_loc_upd_cmd);