cosmetic: fx2regs.h: Fix trailing whitespace

Change-Id: Ie9e14cfb70168d0ff2bcdfb2695d3cb0f77cd5db

1 files changed, 22 insertions, 22 deletions

diff --git a/firmware/include/fx2regs.h b/firmware/include/fx2regs.h
index dec5164..455b067 100644
--- a/firmware/include/fx2regs.h
+++ b/firmware/include/fx2regs.h
@@ -1,19 +1,19 @@
 /* -*- c++ -*- */
 /*
  * Copyright 2003 Free Software Foundation, Inc.
- * 
+ *
  * This file is part of GNU Radio
- * 
+ *
  * GNU Radio is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 3, or (at your option)
  * any later version.
- * 
+ *
  * GNU Radio is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
- * 
+ *
  * You should have received a copy of the GNU General Public License
  * along with GNU Radio; see the file COPYING.  If not, write to
  * the Free Software Foundation, Inc., 51 Franklin Street,
@@ -45,18 +45,18 @@
 // FX2 Related Register Assignments
 //-----------------------------------------------------------------------------
 
-// The Ez-USB FX2 registers are defined here. We use FX2regs.h for register 
-// address allocation by using "#define ALLOCATE_EXTERN". 
-// When using "#define ALLOCATE_EXTERN", you get (for instance): 
+// The Ez-USB FX2 registers are defined here. We use FX2regs.h for register
+// address allocation by using "#define ALLOCATE_EXTERN".
+// When using "#define ALLOCATE_EXTERN", you get (for instance):
 // __xdata volatile BYTE OUT7BUF[64]   _at_   0x7B40;
-// Such lines are created from FX2.h by using the preprocessor. 
-// Incidently, these lines will not generate any space in the resulting hex 
-// file; they just bind the symbols to the addresses for compilation. 
-// You just need to put "#define ALLOCATE_EXTERN" in your main program file; 
-// i.e. fw.c or a stand-alone C source file. 
-// Without "#define ALLOCATE_EXTERN", you just get the external reference: 
+// Such lines are created from FX2.h by using the preprocessor.
+// Incidently, these lines will not generate any space in the resulting hex
+// file; they just bind the symbols to the addresses for compilation.
+// You just need to put "#define ALLOCATE_EXTERN" in your main program file;
+// i.e. fw.c or a stand-alone C source file.
+// Without "#define ALLOCATE_EXTERN", you just get the external reference:
 // extern __xdata volatile BYTE OUT7BUF[64]   ;//   0x7B40;
-// This uses the concatenation operator "##" to insert a comment "//" 
+// This uses the concatenation operator "##" to insert a comment "//"
 // to cut off the end of the line, "_at_   0x7B40;", which is not wanted.
 */
 
@@ -273,10 +273,10 @@ EXTERN __xdata _AT_(0xE6C7) volatile BYTE FLOWLOGIC         ; //Defines flow/hol
 EXTERN __xdata _AT_(0xE6C8) volatile BYTE FLOWEQ0CTL        ; //CTL states during active flow state
 EXTERN __xdata _AT_(0xE6C9) volatile BYTE FLOWEQ1CTL        ; //CTL states during hold flow state
 EXTERN __xdata _AT_(0xE6CA) volatile BYTE FLOWHOLDOFF       ;
-EXTERN __xdata _AT_(0xE6CB) volatile BYTE FLOWSTB           ; //CTL/RDY Signal to use as master data strobe 
+EXTERN __xdata _AT_(0xE6CB) volatile BYTE FLOWSTB           ; //CTL/RDY Signal to use as master data strobe
 EXTERN __xdata _AT_(0xE6CC) volatile BYTE FLOWSTBEDGE       ; //Defines active master strobe edge
 EXTERN __xdata _AT_(0xE6CD) volatile BYTE FLOWSTBHPERIOD    ; //Half Period of output master strobe
-EXTERN __xdata _AT_(0xE60C) volatile BYTE GPIFHOLDAMOUNT    ; //Data delay shift 
+EXTERN __xdata _AT_(0xE60C) volatile BYTE GPIFHOLDAMOUNT    ; //Data delay shift
 EXTERN __xdata _AT_(0xE67D) volatile BYTE UDMACRCH          ; //CRC Upper byte
 EXTERN __xdata _AT_(0xE67E) volatile BYTE UDMACRCL          ; //CRC Lower byte
 EXTERN __xdata _AT_(0xE67F) volatile BYTE UDMACRCQUAL       ; //UDMA In only, host terminated use only
@@ -308,8 +308,8 @@ EXTERN __xdata _AT_(0xFC00) volatile BYTE EP8FIFOBUF[1024]  ;  // 512 byte EP8 b
 /*-----------------------------------------------------------------------------
    Special Function Registers (SFRs)
    The byte registers and bits defined in the following list are based
-   on the Synopsis definition of the 8051 Special Function Registers for EZ-USB. 
-    If you modify the register definitions below, please regenerate the file 
+   on the Synopsis definition of the 8051 Special Function Registers for EZ-USB.
+    If you modify the register definitions below, please regenerate the file
     "ezregs.inc" which includes the same basic information for assembly inclusion.
 -----------------------------------------------------------------------------*/
 
@@ -385,9 +385,9 @@ __sfr __at 0x99 SBUF0;
 
 __sfr __at 0x9A APTR1H;
 __sfr __at 0x9B APTR1L;
-__sfr __at 0x9C AUTODAT1; 
+__sfr __at 0x9C AUTODAT1;
 __sfr __at 0x9D AUTOPTRH2;
-__sfr __at 0x9E AUTOPTRL2; 
+__sfr __at 0x9E AUTOPTRL2;
 __sfr __at 0x9F AUTODAT2;
 __sfr __at 0xA0 IOC;
 __sfr __at 0xA1 INT2CLR;
@@ -446,7 +446,7 @@ __sfr __at 0xB8 IP;
 
 __sfr __at 0xBA EP01STAT;
 __sfr __at 0xBB GPIFTRIG;
-                
+
 __sfr __at 0xBD GPIFSGLDATH;
 __sfr __at 0xBE GPIFSGLDATLX;
 __sfr __at 0xBF GPIFSGLDATLNOX;
@@ -666,7 +666,7 @@ __sfr __at 0xF8 EIP; // EIP Bit Values differ from Reg320
 
 /*
  * Chip Revision Control Bits (REVCTL) - used to ebable/disable revision specific features
- */ 
+ */
 #define bmNOAUTOARM    bmBIT1	// these don't match the docs
 #define bmSKIPCOMMIT   bmBIT0	// these don't match the docs