aboutsummaryrefslogtreecommitdiffstats
path: root/tests
AgeCommit message (Collapse)AuthorFilesLines
2014-10-09gprs-ns/test: Add test_sgsn_reset_invalid_stateJacob Erlbeck2-0/+163
This tests the behaviour for a certain combination of messages and packet losses that can put the NS-VC object into an undefined state. In that state, the peer's ALIVE messages are properly answered, but the local test procedure has stopped, incoming unitdata PDUs are answered by STATUS(NS-VC blocked) and the unblocking procedure is not initiated. Ticket: OW#1312 Sponsored-by: On-Waves ehf
2014-10-09gprs-ns/test: Add expire_nsvc_timerJacob Erlbeck1-0/+15
This function forces the expiration of the timer within struct gprs_nsvc. It is meant to be used for controlled (and faster) timer expiration in unit tests. The timer_mode of the expired timer is returned (or -1 if the timer wasn't active). Sponsored-by: On-Waves ehf
2014-10-09gprs-ns/test: Save the last PDU type sentJacob Erlbeck1-0/+4
This records the PDU type of the last message sent to the remote peer in the global variable sent_pdu_type, which can then be used in assertions. Note that sent_pdu_type will remain unchanged if no message has been sent via sendto. Sponsored-by: On-Waves ehf
2014-10-09gprs-ns/test: Use gprs_nsvc_reset instead of gprs_ns_tx_resetJacob Erlbeck2-22/+13
Currently gprs_ns_tx_reset is used to let the NS stack generate NS_RESET message. This is not adjusting the nsvc state properly. This patch uses gprs_nsvc_reset instead which starts the full reset procedure. Sponsored-by: On-Waves ehf
2014-10-04build: resolve compiler warning about implicit delcarationJan Engelhardt1-0/+1
CC msgfile_test.o msgfile/msgfile_test.c: In function "main": msgfile/msgfile_test.c:48:2: warning: implicit declaration of function "talloc_free" [-Wimplicit-function-declaration] talloc_free(entries); ^
2014-10-03build: fix linker error with kasumi_testJan Engelhardt1-2/+1
When the osmocore package is configured with --disable-static, building of kasumi_test fails. This seems quite legit, given the function _kasumi_kgcore is not exported. Don't try to workaround the build system. Include the code. CCLD kasumi/kasumi_test kasumi_test.o: In function `test_expansion': ~tests/kasumi/kasumi_test.c:25: undefined reference to `_kasumi_key_expand' kasumi_test.o: In function `main': ~tests/kasumi/kasumi_test.c:56: undefined reference to `_kasumi' ~tests/kasumi/kasumi_test.c:100: undefined reference to `_kasumi_key_expand' ~tests/kasumi/kasumi_test.c:112: undefined reference to `_kasumi_kgcore' [...]
2014-10-03build: remove unused all_includes and use AM_CPPFLAGSJan Engelhardt1-1/+2
Preprocessor flags are best placed in AM_CPPFLAGS. Remove use of the unused all_includes variable, which is never set.
2014-08-29msgfile: Fix memleak in the test and release the listHolger Hans Peter Freyther1-0/+1
2014-06-16tests/bits: Make sure all 'inline' are also staticSylvain Munaut1-17/+43
Not doing so seems to break the BSD build Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2014-06-16gsm: Add Kasumi cipher implementationSylvain Munaut4-2/+158
Submitted-by: Max <max.suraev@fairwaves.co> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2014-06-16core: Add generic LE/BE load/store uint type convertors and use them in msgbMax2-1/+248
Submitted-by: Max <max.suraev@fairwaves.co> Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2014-03-26gsm/lapdm: Prevent LAPD tx_queue from filling up in polling modeDaniel Willmann2-17/+9
If LAPDm receives an I-Frame while there already is an I-Frame in the tx_queue the code generates an additional RR (to acknowledge the received I-Frame). Instead, N(R) of the I-Frame in the tx_queue should be updated to ACK the data.
2014-03-26tests/lapd: Add a testcase to check for LAPDm sync issuesDaniel Willmann2-9/+272
Regression test for LAPDm recording the current state
2014-03-20sms_test: Do not crash on logging.Alexander Chemeris1-0/+8
2014-03-10ladpm: Fix msgb handling and SAPI=3 establishment delayJacob Erlbeck1-4/+4
Currently it takes 3s to establish a SAPI 3 SACCH connection with osmo-bts. This is due to the fact, that a broken SABME request is sent first and and is ignored by the MS. Then, after a T200 timeout (2s) the SABME command is sent again (this time correctly) and answered by the MS. The first SABME message is broken (it has a length field of 3 and ends with 3 bytes from the tail of the original RSL message), because of it is expected throughout lapdm.c that msg buffers containing RSL have msg->l2h == msg->data. Some abis input drivers fulfill this but IPA doesn't, thus the 3 bytes of the IPA header are still part of the msg and confuse length computation. Since internal fields of the msg are modified directly, this is difficult to see. This patch adds a new function msgb_pull_to_l3() that explicitely skips over all headers prepending L3 and therefore resets l1h and l2h. This function is then used instead of msgb_pull_l2h() which only worked correctly when msg->l2h == msg->data. In addition, code manipulating msg->tail and msg->len directly has been replaced by calls to msgb_trim(). Note that this patch does not fix all issues of this case in the LADP related code. Ticket: SYS#192 Sponsored-by: On-Waves ehf
2014-03-04lapd/test: Check for empty ACCH queue, tooJacob Erlbeck1-0/+2
This just adds a single test to verify that the ACCH queue is actually empty. Sponsored-by: On-Waves ehf
2014-03-04lapd/test: Extend test case to test msgs having data before l2hJacob Erlbeck2-4/+16
Since e.g. the IPA input driver leaves it's specific header in front of msg->l2h, so that msg->l2h != msg->data. The lapdm code does not expect this at least in rslms_rx_rll_est_req(). This patch modifies the test program to add a dummy L1 header to generated messages (unless the test would abort when doing so). Note that the ok file reflects the current state which is not correct. Sponsored-by: On-Waves ehf
2014-03-04lapd/test: Show dequeued messagesJacob Erlbeck2-32/+72
This adds and uses a wrapper for lapdm_phsap_dequeue_prim() that prints information about the message that has been taken from the queue.
2014-01-26lapd/test: Add test case for RSL EST REQ -> LAPDJacob Erlbeck2-15/+112
This test case processes RSL establish requests for SMS (SAPI 3) on the SDCCH and the SACCH channels. The TX queues are checked after processing each message. Ticket: SYS#192 Sponsored-by: On-Waves ehf
2014-01-09sms: Fix gsm_7bit legacy functions return valueJacob Erlbeck2-0/+30
The legacy 7bit conversion functions (those without the '_n_' in the name) gave wrong return values on 64 bit platforms due to unproper signed/unsigned conversions and the usage of SIZE_MAX. This patch fixes this by using a smaller max size (see GSM_7BIT_LEGACY_MAX_BUFFER_SIZE, currently set to 64k) for the legacy wrappers and by using unsigned int for max_septets. In addition, there are tests now that check the return values of legacy encoding and decoding. Sponsored-by: On-Waves ehf
2014-01-02utils: Greatly improve performance of osmo_hexdump routinesNils O. Selåsdal1-1/+1
In the osmo-bts and libosmo-abis code the hexdump routine is used for every incoming/outgoing packet (including voice frames) and the usage of snprintf showed up inside profiles. There is a semantic change when more than 4096 characters are used. The code will now truncate at byte boundaries (and not nibbles). Code: static const int lengths[] = { 23, 1000, 52 }; char buf[4096]; int i; for (i = 0; i < 30000; ++i) char *res = osmo_hexdump(buf, lengths[i & 3]); Results: before: after: real 0m3.233s real 0m0.085s user 0m3.212s user 0m0.084s sys 0m0.000s sys 0m0.000s
2014-01-02utils: Add a simple testcase for osmo_hexdumpHolger Hans Peter Freyther4-2/+64
This code makes a simple dump and tests for the corner case
2013-12-29logging: Copy the filter_fn and fix the IMSI filter in OpenBSCHolger Hans Peter Freyther1-0/+17
The filter_fn has not been copied into the new structure breaking the imsi and other filters in OpenBSC. Looking at the code we should also introduce a callback for the reset of the context so we could use subscr_get/subscr_put on the subscriber structure.
2013-12-07Refactor COMP128v23 implementation and add test suitMax4-2/+4184
2013-10-30gprs: Ignore NS RESET_ACK and ALIVE_ACK without RESETJacob Erlbeck1-6/+0
Currently those messages are answered by a NS_STATUS message when received on an uninitialised (no NS_RESET hat been seen yet) NS_VC which violates GPP TS 08.16 7.3.1 and 7.4.1. This patch adds checks to gprs_ns_vc_create() and eventually returns before the error NS_STATUS message is generated. Sponsored-by: On-Waves ehf
2013-10-30grps: Add test for NS messages that shall be ignoredJacob Erlbeck2-0/+55
Several messages shall not be answered when a RESET hasn't been received on a NS-VC: - NS_RESET_ACK (see 3GPP TS 08.16, 7.3.1) - NS_ALIVE_ACK (see 3GPP TS 08.16, 7.4.1) - NS_STATUS (see 3GPP TS 08.16, 7.5.1) Sponsored-by: On-Waves ehf
2013-10-26lapd: Extend the test to check if lapdm_channel_exit is idempotentHolger Hans Peter Freyther1-0/+10
I have a crash with an older libosmocore and the sysmobts. I am not sure how we can have a release for a channel where the lapdm_channel has not gone through lapdm_channel_init. But to prevent the crash we can promise lapdm_channel_exit to be idempotent. It has been idempotent since f5a079f739c57d8be7c59149fd45475c402a45fc
2013-10-24gb: Create new NSVC object instead of patching the NSVCIJacob Erlbeck2-12/+28
When a RESET is received on the same link with a different NSVCI from a BSS on a dynamically created NS connection do not patch the nsvc object but create a new one instead. Thus the NSVCI is never modified at a nsvc object after the NS-VC has been established. Sponsored-by: On-Waves ehf
2013-10-24gb: Fix RESET handling with changing NSEIJacob Erlbeck1-22/+27
This modifies the NS stack's behavior to accept RESET and RESET_ACK NSEI changes for NS-VC dynamically created by RESET messages from BSSes. This feature is not used for NS-VC configured via VTY or NS-VC to a SGSN. Sponsored-by: On-Waves ehf
2013-10-24gb: Fix NS RESET/RESET_ACK abnormal casesJacob Erlbeck2-101/+74
This changes the implementations for the reception of RESET and RESET_ACK to be compatible with 3GPP TS 08.16, 7.3.1: - Just send a RESET_ACK with correct values back to the SGSN when a RESET with an invalid NSVCI or NSEI has been received. - Check RESET_ACK for matching NSEI and NSVCI. - Ignore unexpected RESET_ACKs. In addition, use RESET_ACK from a BSS to update the BSS source address based on the NSVCI to be tolerant with changing UDP source addresses/ports. Sponsored-by: On-Waves ehf
2013-10-24gb: Add test cases for NS RESET proceduresJacob Erlbeck2-0/+703
Add a test handling proper and mismatching RESETs. The latter may occur, when ports change within a NS-VC without the SGSN getting notice. This tests for the behavior of the NS protocol stack for RESET and RESET_ACK messages which changing/invalid NSEI and NSVCI like it is being described in 3GPP TS 08.16, 7.3.1. Sponsored-by: On-Waves ehf
2013-10-24gb: Fix gprs_nsvc_delete() to free ctr groupJacob Erlbeck2-0/+127
This fixes a SEGV error that happens the next time the statistics are updated. Addresses: Program terminated with signal 11, Segmentation fault. #0 0xb7711fa5 in rate_ctr_group_intv (grp=<optimized out>) at rate_ctr.c:107 107 for (i = 0; i < grp->desc->num_ctr; i++) { #0 0xb7711fa5 in rate_ctr_group_intv (grp=<optimized out>) at rate_ctr.c:107 #1 rate_ctr_timer_cb (data=0x0) at rate_ctr.c:129 #2 0xb770ec59 in osmo_timers_update () at timer.c:243 #3 0xb770ef7a in osmo_select_main (polling=0) at select.c:133 #4 0x08049987 in main (argc=3, argv=0xbfba8084) at gb_proxy_main.c:306 Sponsored-by: On-Waves ehf
2013-10-17gb: Fix gprs_active_nsvc_by_nsei()Jacob Erlbeck1-10/+10
The state matching condition is inverted. This is corrected by this fix. Sponsored-by: On-Waves ehf
2013-10-17gb: Test sending messages to the SGSNJacob Erlbeck2-53/+418
This adds tests for the gprs_ns_sendmsg() function. For this it merges back functions from the gbproxy test. Sponsored-by: On-Waves ehf
2013-10-15gb: Fix gprs_ns_rx_reset to not create NS-VC duplicatesJacob Erlbeck2-3/+35
Under special circumstances (see below) receiving a NS-RESET leads to duplicated NS-VC entries. This happens when the source port of a NS-VC changes to a new one that has already been used by another NS-VC. This patch changes gprs_ns_rx_reset() to check for this case and to use the existing NS-VC object. The NS-VC object that was associated with the source address before is detached from this source but kept in the NS-VC list so that it can be reattached when a correspondent NS-RESET is received later on. Meanwhile it will have a cleared link layer address which will not match a real link info. A new counter NS_CTR_REPLACED is incremented each time when the NS-VC object is replacing another one. A new signal S_NS_REPLACED is added which gets dispatched in this case, too. Another new counter NS_CTR_NSEI_CHG is incremented each time when the NSEI of a NS-VC object (with fixed NSVCI) changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15gb: Add functions to access the LL part of the NS-VC objectsJacob Erlbeck1-5/+5
Adds the functions gprs_ns_ll_copy() and gprs_ns_ll_clear(). Renames gprs_ns_format_peer() to gprs_ns_ll_str(). All of these functions uniformly access the link layer part within the NS-VC objects. Sponsored-by: On-Waves ehf
2013-10-11tests/gb: Show invoked signals in test outputJacob Erlbeck2-1/+53
Register an osmo signal handler to print a short notice about every SS_L_NS signal that is generated while processing the tests. Sponsored-by: On-Waves ehf
2013-10-10vty: Make vty_event dispatch signals and use it in the testcaseHolger Hans Peter Freyther1-4/+17
The testcase didn't work on Ubuntu 12.04 because vty_create will directly call vty_event (e.g. not through the plt). This means that the approach to override vty_event in the testcase failed. Use the signal interface of libosmocore and make the testcase use it. The signals can be generally useful as well.
2013-10-08gb: Use the NS-VCI to find an existing NS-VCJacob Erlbeck1-3/+4
Currently when a NS-RESET is recevied over a link that has not yet been associated with a NS-VC, the NSEI is used to find an existing NS-VC. If one is found, the reset procedure is initiated. This behaviour is not conformant with 3GPP TS 08.16 (see chapter 4.2.3) which allows to use several NS-VC between two endpoints in parallel. The patch changes the implementation to use the NSVCI instead of the NSEI to search for an existing NS-VC object. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-08gb: Fix NS-RESET response message orderJacob Erlbeck1-18/+18
According to 3GPP TS 08.16, 7.3 "Reset procedure" the entity receiving a NS-RESET PDU responds with a NS-RESET-ACK and 'then' starts the test procedure which essentially means, that a NS-ALIVE gets sent and a timer is started. Currently the NS-ALIVE is sent before the NS-RESET-ACK. This patch fixes the implementation by reversing the order in which these messages are sent. Sponsored-by: On-Waves ehf
2013-10-08tests/gb: Add test for GPRS NS protocolJacob Erlbeck4-1/+383
This tests the connection establishment by directly calling gprs_ns_rcvmsg() and printing the resulting messages and the NS-VC list.
2013-10-08tests: Fix warningsJacob Erlbeck5-5/+8
This fixes warnings that are raised by missing includes, missing casts, missing return statements, using printf %lu with uint64_t, and unused symbols.
2013-10-08tests: Fix the sms_test and use the right arrayHolger Hans Peter Freyther1-1/+1
It started to behave weird on Debian Testing (GCC 4.8), I compiled it with address sanitizer support and set a breakpoint in __asan_report_error to get a backtrace.
2013-09-16bssgp: Address various compiler warnings in the bssgp codeHolger Hans Peter Freyther1-0/+3
gb/bssgp_fc_test.c: In function ‘fc_out_cb’: gb/bssgp_fc_test.c:46:1: warning: no return statement in function returning non-void [-Wreturn-type] gb/bssgp_fc_test.c: In function ‘fc_in’: gb/bssgp_fc_test.c:56:1: warning: no return statement in function returning non-void [-Wreturn-type] gb/bssgp_fc_test.c: In function ‘test_fc’: gb/bssgp_fc_test.c:79:3: warning: implicit declaration of function ‘usleep’ [-Wimplicit-function-declaration]
2013-09-10vty: Fix compiler warning in the testHolger Hans Peter Freyther1-1/+2
2013-09-08vty: Add vty_install_default() and use for the vty nodesJacob Erlbeck2-0/+167
This adds the vty_install_default() function that is basically the install_default() function plus the registration of the commands 'exit' and 'end'. The latter is only provided in subnodes of ENABLED_NODE and CONFIG_NONE. The VTY test program is extended to check these commands. Ticket: OW#952
2013-09-04sms: Implement encoding the address as alphanumeric typeHolger Hans Peter Freyther2-1/+49
The number of digits is the number of used octets times two (two digits per octet). The result has been successfully dissected by wireshark. It has not been tested with real phones.
2013-08-14conv: Fix main() of conv_test to compile with clang.Jacob Erlbeck1-1/+2
Fix type of argument 'argv'. Addresses: conv/conv_test.c:358:5: error: second parameter of 'main' (argument array) must be of type 'char **' int main(int argc, char argv[])
2013-08-13tests: Move expensive tests to the end of the listJacob Erlbeck1-13/+13
This lets make check fail earlier (in average) to shorten the debugging cycle time.
2013-08-12sms: Added result buffer size parameter to 7bit conv funsJacob Erlbeck4-61/+134
The 7bit<->8bit encoding/decoding functions didn't check whether there is still enough space in the destination buffer. Therefore a buffer size parameter has been added to each of the functions which is used to truncate the output if the buffer is too small. In addition, the return value of the decoding functions has been changed to number of characters written (excluding \0), so this value is always equal to strlen(decoded). The old functions are still available as wrapper functions.