aboutsummaryrefslogtreecommitdiffstats
path: root/tests/gb
AgeCommit message (Collapse)AuthorFilesLines
4 hoursgprs_ns2: Give NS-VC FSMs a proper name/identifierHEADmasterHarald Welte1-3/+3
Log output without a proper identifier is mostly useless. Change-Id: Id9d5b0684584d03685900c6298fe70246793de14 Closes: OS#4876
8 hourstest: gprs_ns2: don't leak the talloc contextAlexander Couzens1-0/+1
Makes the address sanitizer happy Change-Id: Ibf926d8db88cdb403d29de5e666dfb71eefc7b72
13 daysgprs_ns2: set transfer cap in NS Status primitiveAlexander Couzens2-0/+174
Related: SYS#5153 OS#4835 Change-Id: Ia1046db9e0d50855bff9de670b612ffc57af9995
2021-01-01gprs_ns2: call python vty testsAlexander Couzens2-0/+27
Also checks vty docs Change-Id: Ia8b77ae5bc3fed835dd1fc2cce0acbc41f199d54
2021-01-01utils: add osmo-ns-dummyAlexander Couzens1-0/+33
A dummy client to do integration tests of the ns2 layer. It drop all unit data. But allows vty tests. Change-Id: I127c178426bc1a3da8de251740eda93853030d6d
2020-12-16gprs_bssgp: add IE parser/generator for RIM Routing InformationPhilipp Maier2-0/+189
The RIM Routing Information IE (see also 3GPP TS 48.018, section 11.3.70) is used to control the flow of BSSGP rim messages at the SGSN. Change-Id: I6f88a9aeeb50a612d32e9efd23040c9740bc4f11 Related: SYS#5103
2019-02-26NS: Factor out gprs_nsvc_start_test() and use itHarald Welte1-10/+10
This function performs sending a NS-ALIVE PDU and starting Tns-Test, let's use it in all places where we used to do that. As part of this, also fix a bug where the sendto() return value (number of bytes sent) would actually propagate up all the way to gprs_ns_rx_reset() return value, which in turn affects the test results on stdout. Change-Id: I4d303117f77fabb74bbb91887b9914a81c2a084a
2018-11-19send NS_POUT_UNBLOCK_ACK before signalling S_NS_UNBLOCKStefan Sperling1-5/+5
In gprs_ns_process_msg(), we were dispatching the S_NS_UNBLOCK signal before sending out the NS_POUT_UNBLOCK_ACK message. Signal handlers might send messages to the other side, assuming that NS is now unblocked. However, since such messages will arrive before the UNBLOCK_ACK message the receiver might discard them. This problem has been observed with our TTCN3 BSSGP_Emulation as a peer to osmo-pcu. This patch makes TTCN3 PCU TC_paging() test pass regardless of whether the test or osmo-pcu is started first. Before this patch, this test would only pass if the test was started before osmo-pcu. A remaining problem is that the test does not yet keep passing reliably unless osmo-pcu is restarted between test runs. Change-Id: I3af54a14bb6bcfa167c9a9d9f67835e7f5b9f1bb Related: OS#2890 Related: OS#2388
2018-04-06use osmo_init_logging2() with proper talloc ctxNeels Hofmeyr3-5/+11
Ironically, when deprecating osmo_init_logging() in I216837780e9405fdaec8059c63d10699c695b360, I forgot to change the callers within libosmocore itself, i.e. in the various regression tests. Change-Id: Ia36c248f99353d5baaa2533f46a2f60a8579bdf8
2018-01-08Use existing function for TLLI encodingMax1-4/+4
Use bssgp_msgb_tlli_put() instead of copy-pasted code. Change-Id: I06d60566a19dcae701f8648c19fbd8db6d586f77
2017-11-20bssgp_fc_test: sanitize: free fc struct when doneNeels Hofmeyr1-0/+2
Helps fix sanitizer build on debian 9. Change-Id: I0ef95ee8185a4789f0732b9420243dda5104d181
2017-11-20gprs_bssgp: bssgp_fc_in(): fix mem leak on queue overflowNeels Hofmeyr2-3/+4
All successful and all error code paths of bssgp_fc_in() free the msgb, except the code path calling fc_enqueue() when the msg is dropped (due to queue being full, or failure to allocate). Callers could theoretically catch the -ENOSPC return value and discard the msgb. However, in other code paths, a callback's return value is returned, which is expected to free the msgb, so such callback would have to never return -ENOSPC when it freed the msgb. Much simpler semantics would be to free the msgb in every code path, no matter which kind of error occurred. Who is currently calling bssgp_fc_in and how do they handle the return value? - bssgp_fc_test.c ignores the return value (and hits a mem leak aka sanitizer build failure if the queue is full). - fc_timer_cb() ignores the return value. - bssgp_tx_dl_ud() returns the bssgp_fc_in() rc. - which is returned by a cascade of functions leading up to being returned, for example, by gprs_llgmm_reset(), which is usually called with ignored return code. At this point it is already fairly clear that bssgp_fc_in() should always free the msgb, since the callers don't seem to distinguish even between error or success, let alone between -ENOSPC or other errors. bssgp_fc_test: assert that no msgbs remain unfreed after the tests. Adjust expected results. Helps fix sanitizer build on debian 9. Change-Id: I00c62a104baeaad6a85883c380259c469aebf0df
2017-11-20bssgp_fc_test: sanitizer: free msgb context when doneNeels Hofmeyr2-0/+12
Print remaining msgbs when done, then free the entire tall_msgb_context. To be able to do that, call msgb_talloc_ctx_init() and use its return value. A subsequent patch will fix a known mem leak and add assertions for 0b in 1 blocks remaining in the tall_msgb_context. Helps fix sanitizer build on debian 9. Change-Id: I67d347ab2642b0bfc27b21b44231a7f3146ff641
2017-11-20bssgp_fc_test: clarify by outputting ok / failure messagesNeels Hofmeyr2-3/+99
The test fills up the queue / sends too large PDUs on purpose. Make that obvious by outputting returned errors in the expected output. Cosmetic: - fc_in()'s return value is ignored, hence don't return anything. - add comment. Change-Id: I57d6fce2515a65f6dd037e75af5397079215cb46
2017-11-20bssgp_fc_test: remove rounding to decisecondsNeels Hofmeyr1-10/+0
Ever since this test was changed to use osmo_gettimeofday_override, the times it sees are exact every time and don't need rounding to pass the expected output. Change-Id: I4a9a5d31fc02eb55caf7ba9c141426d8115bb740
2017-11-13Fix/Update copyright notices; Add SPDX annotationHarald Welte2-2/+6
Let's fix some erroneous/accidential references to wrong license, update copyright information where applicable and introduce a SPDX-License-Identifier to all files. Change-Id: I39af26c6aaaf5c926966391f6565fc5936be21af
2017-10-24rate_ctr: Enforce counter (and ctr_group) names are valid identifiersHarald Welte1-1/+1
As rate counters are automatically exposed on the CTRL interface, we need to make sure they don't contain special characters such as '.' which are not permitted/supported by CTRL. In order to be able to run old versions of osmocom programs with libosmocore versions after this commit, we introduce some special name mangling: Any '.' in the names are replaced with ':' during counter group registration, if valid identifiers can be obtained this way. Change-Id: Ifc6ac824f5dae9a848bb4a5d067c64a69eb40b56
2017-10-24GPRS: unify NS state printingMax2-63/+64
* introduce defines with NS state names * use them for vty and tests * expand test output to print complete NS state Change-Id: I69f8d536135ae76dbca623c2f1ffba625adcb1e9 Related: SYS#3610
2017-06-18gprs_ns_test.c: Remove unused byte arraysPau Espin Pedrol1-49/+0
Commit 0d4e949e229a649ffd0503d8e930dba8be7dd34d changed the code to use functions with local variables holding the bytes, but forgot to remove the old global variables. This test fixes compilation warnings. Change-Id: I140de30038222b0419423d8c4f9da1946651a4e7
2017-02-07bssgp_fc_test: do not use real timeNeels Hofmeyr1-1/+8
Employ osmo_gettimeofday_override_* to take bssgp_fc_test off real time. The jenkins build slave often failed the test based on sporadic time delays due to server load and randomly rejected good patches. This patch ends that. Change-Id: Ie5029b85c2a154554d75d7f9af49a3b93425fdd9 Related: OS#1809
2016-09-22add osmo_gettimeofday as a shim around gettimeofdayNeels Hofmeyr1-2/+2
This allows feeding a custom time for unit tests by overriding osmo_gettimeofday. Change-Id: Ic7a81a6eb51f27fe452962b91f2eae2070d87089
2016-02-22gb: Add bssgp_msgb_copy functionJacob Erlbeck2-0/+38
This function originates from openbsc/src/gprs but is just specific to BSSGP/Gb on the same level like bssgp_msgb_alloc. This commit puts the former gprs_msgb_copy function beside bssgp_msgb_alloc. Renamed function: gprs_msgb_copy -> bssgp_msgb_copy Sponsored-by: On-Waves ehf
2015-11-09test: Fix compiler warnings on 64bit systemsHolger Hans Peter Freyther2-9/+9
Use %td to print ptrdiff_t use %zu to print size_t, include time.h on FreeBSD. Some more compiler warnings are left but they require more thinking.
2015-12-17ns: Force a defined state when sending NS RESETJacob Erlbeck2-0/+102
Currently the state is assumed to remain the same while the reset procedure is active. While this works correctly in general, a single unexpected BLOCK_ACK or UNBLOCK_ACK can change the state but will not stop the reset procedure. The leads to repeated RESET messages, where the corresponding RESET_ACK is ignored. This is a stable state which can only be left by manual intervention or by reception of a RESET message from the peer. This commit changes the RESET timeout handler to set the state to BLOCKED/RESET when sending the new NS RESET message. Note that this should ensure a clean restart even if the state has been screwed up. It does not fix the handling of BLOCK_ACK or UNBLOCK_ACK in abnormal cases. Addresses: gprs_ns.c:349 NSEI=8895 Tx NS RESET (NSVCI=8895, cause=O&M intervention) gprs_ns.c:878 NSVCI=8895 Rx NS RESET ACK (NSEI=8895, NSVCI=8895) gprs_ns.c:887 NS RESET ACK Discarding unexpected message for NS-VCI 8895 from SGSN NSEI=8895 Ticket: OW#1551 Sponsored-by: On-Waves ehf
2015-06-19bssgp/test: Add missing START/END printfsJacob Erlbeck2-1/+8
Sponsored-by: On-Waves ehf
2015-05-06bssgp: Fix bssgp_tx_fc_bvc parameter typeJacob Erlbeck2-0/+79
Currently large values for Bmax default MS get sliced since a uint16_t is used as the type of the corresponding parameter of bssgp_tx_fc_bvc. GSM 48.018, 11.3.2 which in turn refers to 11.3.5 specifies a maximum of 6MB (0xffff * 100). This commit changes the type to uint32_t to cover the full value range. Sponsored-by: On-Waves ehf
2015-05-04bssgp/test: Fix bssgp-fc testJacob Erlbeck1-30/+0
The fix in the commit "bssgp: Fix call to llist_entry in fc_queue_timer_cfg" prevents the flow control code from generating certain logging messages ("-BSSGP-FC: fc_timer_cb() but still not able to send PDU of 10 bytes") during the tests. This breaks the test suite, since the update of the correseponding stderr output file misses. This commit updates the bssgp_fc_tests.err file accordingly. Sponsored-by: On-Waves ehf
2015-04-07bssgp: Ensure non-NULL bctx before calling bssgp_rx_ptp (Coverity)Jacob Erlbeck1-0/+17
Currently bssgp_rx_ptp might be called with bctx being NULL, when the NS BVCI is neither BVCI_SIGNALLING nor BVCI_PTM, but the message is a BVC_RESET or it contains an BVCI IE != BVCI_SIGNALLING where the BVCI is not known. This patch ensures that bssgp_rx_ptp will only be called with a non-NULL bctx. A log message will be issued, if the bctx is NULL when this was not expected. Fixes: Coverity CID 1040674 Sponsored-by: On-Waves ehf
2015-03-18bssgp: Handle BSSGP STATUS messagesJacob Erlbeck2-0/+39
Currently incoming BSSGP STATUS messages are just logged and no other action is taken. This makes it impossible for higher layers to react to failures which are indicated by corresponding STATUS messages unless a timeout is triggered as a result of that failure later on. This commit adds a bssgp_rx_status() function and calls it on incoming STATUS messages. That function logs a message, increments the new BSSGP_CTR_STATUS counter if the bctx context exists and invokes an NM_STATUS status indication. The latter will allow the application to handle failures immediately. Since all STATUS messages should be handled, the function is already called in bssgp_rcvmsg and the message is no longer handled in (and will not reach) bssgp_rx_sign and bssgp_rx_ptp. Ticket: OW#1414 Sponsored-by: On-Waves ehf
2014-10-25bssgp: Include sys/socket.h for AF_INET on FreeBSDHolger Hans Peter Freyther1-0/+1
2014-10-23gprs: Don't discard SUSPEND/RESUME in bssgp_rcvmsgJacob Erlbeck2-2/+4
Currently sending SUSPEND/RESUME messages to this function (like it is done in the osmo-sgsn) results in STATUS messages complaining about an unknown BVCI. The reason is, that these messages rely on a TLLI/RAI pair to identify the context and do not contain an explicit BVCI. This patch modifies bssgp_rcvmsg() to only complain about and unknown BVCI if one is given but a matching context is not found (except for RESET messages). The ctx argument is removed from the functions handling SUSPEND and RESUME since it will always be NULL then. Sponsored-by: On-Waves ehf
2014-10-23gprs/test: Add BSSGP testsJacob Erlbeck2-0/+156
This patch adds a test suite for the BSSGP protocol. The first (and only) test checks the handling of BSSGP SUSPEND/RESUME. Sponsored-by: On-Waves ehf
2014-10-10bssgp: Free msgb in case of error when calling into gprs_ns_sendmsgHolger Hans Peter Freyther1-4/+8
In the OsmoSGSN we have a crash with a DEAD/BLOCKED GPRS-NS and segmented SN-UNITDATA. For the caller it is not easy to know if the passed msg buffer has been freed or not. The most easy solution is to always take the ownership and either pass it on or free it in case of an error. Adjust indirect and direct callers of gprs_ns_sendmsg. I found the following call-chains with an external msgb parameter. gprs_ns_sendmsg <- _bssgp_tx_dl_ud <- bssgp_fc_in <- bssgp_tx_dl_ud Update the test to allocate a real msgb because for the test with '1000' we will msgb_free it right away. Sponsored-by: On-Waves ehf
2014-10-09gprs-ns/test: Check the nsvc state explicitelyJacob Erlbeck1-0/+7
This patch extends test_sgsn_reset_invalid_state by assertions to check that nscv->state and nsvc->remote_state have been set as expected. Sponsored-by: On-Waves ehf
2014-10-09gprs-ns/test: Re-add return value check for gprs_nsvc_resetHolger Hans Peter Freyther1-1/+3
The return value check has been removed in the commit 'Use gprs_nsvc_reset instead of gprs_ns_tx_reset', because gprs_nsvc_reset had no return value then. Since a compatible return value has been added by 'Let gprs_nsvc_reset return a value', the former patch is partly reverted by this commit. The printf is now an OSMO_ASSERT. The commit message was taken from Jacob. Sponsored-by: On-Waves ehf
2014-10-09gprs-ns: Fix reset state handlingJacob Erlbeck2-6/+23
Currently the NS-VC's state is updated from within gprs_ns_tx_reset, which can lead to an inconsistent state when the RESET_ACK is lost. In this state, the NSE_S_RESET bit is set but the Tns-reset timer is not started. This patch moves the state update into gprs_nsvc_reset. This way, the state flags are consistent with the timer. Addresses: SGSN -> BSS NS_ALIVE BSS -> SGSN NS_ALIVE_ACK BSS -> SGSN BVC_RESET SGSN -> BSS NS_STATUS, Cause: NS-VC blocked, NS VCI: 0x65 and there is no BSS->SGSN NS_ALIVE Ticket: OW#1213 Sponsored-by: On-Waves ehf
2014-10-09gprs-ns/test: Add test_sgsn_reset_invalid_stateJacob Erlbeck2-0/+163
This tests the behaviour for a certain combination of messages and packet losses that can put the NS-VC object into an undefined state. In that state, the peer's ALIVE messages are properly answered, but the local test procedure has stopped, incoming unitdata PDUs are answered by STATUS(NS-VC blocked) and the unblocking procedure is not initiated. Ticket: OW#1312 Sponsored-by: On-Waves ehf
2014-10-09gprs-ns/test: Add expire_nsvc_timerJacob Erlbeck1-0/+15
This function forces the expiration of the timer within struct gprs_nsvc. It is meant to be used for controlled (and faster) timer expiration in unit tests. The timer_mode of the expired timer is returned (or -1 if the timer wasn't active). Sponsored-by: On-Waves ehf
2014-10-09gprs-ns/test: Save the last PDU type sentJacob Erlbeck1-0/+4
This records the PDU type of the last message sent to the remote peer in the global variable sent_pdu_type, which can then be used in assertions. Note that sent_pdu_type will remain unchanged if no message has been sent via sendto. Sponsored-by: On-Waves ehf
2014-10-09gprs-ns/test: Use gprs_nsvc_reset instead of gprs_ns_tx_resetJacob Erlbeck2-22/+13
Currently gprs_ns_tx_reset is used to let the NS stack generate NS_RESET message. This is not adjusting the nsvc state properly. This patch uses gprs_nsvc_reset instead which starts the full reset procedure. Sponsored-by: On-Waves ehf
2013-10-30gprs: Ignore NS RESET_ACK and ALIVE_ACK without RESETJacob Erlbeck1-6/+0
Currently those messages are answered by a NS_STATUS message when received on an uninitialised (no NS_RESET hat been seen yet) NS_VC which violates GPP TS 08.16 7.3.1 and 7.4.1. This patch adds checks to gprs_ns_vc_create() and eventually returns before the error NS_STATUS message is generated. Sponsored-by: On-Waves ehf
2013-10-30grps: Add test for NS messages that shall be ignoredJacob Erlbeck2-0/+55
Several messages shall not be answered when a RESET hasn't been received on a NS-VC: - NS_RESET_ACK (see 3GPP TS 08.16, 7.3.1) - NS_ALIVE_ACK (see 3GPP TS 08.16, 7.4.1) - NS_STATUS (see 3GPP TS 08.16, 7.5.1) Sponsored-by: On-Waves ehf
2013-10-24gb: Create new NSVC object instead of patching the NSVCIJacob Erlbeck2-12/+28
When a RESET is received on the same link with a different NSVCI from a BSS on a dynamically created NS connection do not patch the nsvc object but create a new one instead. Thus the NSVCI is never modified at a nsvc object after the NS-VC has been established. Sponsored-by: On-Waves ehf
2013-10-24gb: Fix RESET handling with changing NSEIJacob Erlbeck1-22/+27
This modifies the NS stack's behavior to accept RESET and RESET_ACK NSEI changes for NS-VC dynamically created by RESET messages from BSSes. This feature is not used for NS-VC configured via VTY or NS-VC to a SGSN. Sponsored-by: On-Waves ehf
2013-10-24gb: Fix NS RESET/RESET_ACK abnormal casesJacob Erlbeck2-101/+74
This changes the implementations for the reception of RESET and RESET_ACK to be compatible with 3GPP TS 08.16, 7.3.1: - Just send a RESET_ACK with correct values back to the SGSN when a RESET with an invalid NSVCI or NSEI has been received. - Check RESET_ACK for matching NSEI and NSVCI. - Ignore unexpected RESET_ACKs. In addition, use RESET_ACK from a BSS to update the BSS source address based on the NSVCI to be tolerant with changing UDP source addresses/ports. Sponsored-by: On-Waves ehf
2013-10-24gb: Add test cases for NS RESET proceduresJacob Erlbeck2-0/+703
Add a test handling proper and mismatching RESETs. The latter may occur, when ports change within a NS-VC without the SGSN getting notice. This tests for the behavior of the NS protocol stack for RESET and RESET_ACK messages which changing/invalid NSEI and NSVCI like it is being described in 3GPP TS 08.16, 7.3.1. Sponsored-by: On-Waves ehf
2013-10-24gb: Fix gprs_nsvc_delete() to free ctr groupJacob Erlbeck2-0/+127
This fixes a SEGV error that happens the next time the statistics are updated. Addresses: Program terminated with signal 11, Segmentation fault. #0 0xb7711fa5 in rate_ctr_group_intv (grp=<optimized out>) at rate_ctr.c:107 107 for (i = 0; i < grp->desc->num_ctr; i++) { #0 0xb7711fa5 in rate_ctr_group_intv (grp=<optimized out>) at rate_ctr.c:107 #1 rate_ctr_timer_cb (data=0x0) at rate_ctr.c:129 #2 0xb770ec59 in osmo_timers_update () at timer.c:243 #3 0xb770ef7a in osmo_select_main (polling=0) at select.c:133 #4 0x08049987 in main (argc=3, argv=0xbfba8084) at gb_proxy_main.c:306 Sponsored-by: On-Waves ehf
2013-10-17gb: Fix gprs_active_nsvc_by_nsei()Jacob Erlbeck1-10/+10
The state matching condition is inverted. This is corrected by this fix. Sponsored-by: On-Waves ehf
2013-10-17gb: Test sending messages to the SGSNJacob Erlbeck2-53/+418
This adds tests for the gprs_ns_sendmsg() function. For this it merges back functions from the gbproxy test. Sponsored-by: On-Waves ehf
2013-10-15gb: Fix gprs_ns_rx_reset to not create NS-VC duplicatesJacob Erlbeck2-3/+35
Under special circumstances (see below) receiving a NS-RESET leads to duplicated NS-VC entries. This happens when the source port of a NS-VC changes to a new one that has already been used by another NS-VC. This patch changes gprs_ns_rx_reset() to check for this case and to use the existing NS-VC object. The NS-VC object that was associated with the source address before is detached from this source but kept in the NS-VC list so that it can be reattached when a correspondent NS-RESET is received later on. Meanwhile it will have a cleared link layer address which will not match a real link info. A new counter NS_CTR_REPLACED is incremented each time when the NS-VC object is replacing another one. A new signal S_NS_REPLACED is added which gets dispatched in this case, too. Another new counter NS_CTR_NSEI_CHG is incremented each time when the NSEI of a NS-VC object (with fixed NSVCI) changes. Ticket: OW#874 Sponsored-by: On-Waves ehf