| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently when a NS-RESET is recevied over a link that has not yet
been associated with a NS-VC, the NSEI is used to find an existing
NS-VC. If one is found, the reset procedure is initiated.
This behaviour is not conformant with 3GPP TS 08.16 (see chapter
4.2.3) which allows to use several NS-VC between two endpoints in
parallel.
The patch changes the implementation to use the NSVCI instead
of the NSEI to search for an existing NS-VC object.
Ticket: OW#874
Sponsored-by: On-Waves ehf
|
|
According to 3GPP TS 08.16, 7.3 "Reset procedure" the entity
receiving a NS-RESET PDU responds with a NS-RESET-ACK and 'then'
starts the test procedure which essentially means, that a NS-ALIVE
gets sent and a timer is started.
Currently the NS-ALIVE is sent before the NS-RESET-ACK.
This patch fixes the implementation by reversing the order in which
these messages are sent.
Sponsored-by: On-Waves ehf
|
|
This patch refactors gprs_ns_rcvmsg() by moving the parts relevant to
the NS messages into the new functions gprs_ns_vc_create() (nsvc
object creation) and gprs_ns_process_msg() (main NS automaton). These
do not contain code that directly depends on the link layer (they
call other functions that still do). This reduces the gprs_ns_rcvmsg()
function to calling these two functions and optionally setting up the
link layer specific fields of the nsvc.
Sponsored-by: On-Waves ehf
|
|
This information element has been added to the MM Information
message in GSM24.008. This patch adds it to the tlv_definition
to keep the TLV parser from breaking.
Ticket: OW#978
|
|
This patch removes an assertion of node > CONFIG_NODE and changes
the function to handle all nodes properly.
For the sake of completeness, the generic 'exit' command
implementation is extended to work properly with all nodes, too.
|
|
In this case the last_node variable may hold values that are not
in enum node_type, so int is used instead.
|
|
This adds the vty_install_default() function that is basically the
install_default() function plus the registration of the commands
'exit' and 'end'. The latter is only provided in subnodes of
ENABLED_NODE and CONFIG_NONE.
The VTY test program is extended to check these commands.
Ticket: OW#952
|
|
Put all 'exit' logic into vty_go_parent() and replace the
implementations of 'exit' and 'end' by generic ones that use
vty_go_parent().
|
|
The function is_config() returns 0 for CONFIG_NODE. Since that node
is a config node, the function is renamed to resolve this.
|
|
The number of digits is the number of used octets times two (two
digits per octet). The result has been successfully dissected by
wireshark. It has not been tested with real phones.
|
|
The table structure is not intuitive, so this comment shall aid to
understand this.
|
|
The 7bit<->8bit encoding/decoding functions didn't check whether
there is still enough space in the destination buffer. Therefore a
buffer size parameter has been added to each of the functions which
is used to truncate the output if the buffer is too small.
In addition, the return value of the decoding functions has been
changed to number of characters written (excluding \0), so this
value is always equal to strlen(decoded).
The old functions are still available as wrapper functions.
|
|
if (ptr)
msgb_free(ptr)
extends to:
if (ptr)
talloc_free(ptr)
And according to the talloc documentation a talloc_free(NULL)
will not crash: "... Likewise, if "ptr" is NULL, then the function
will make no modifications and returns -1."
|
|
|
|
Handling 7-bit coding is a little different for USSD, as TS 03.38
states:
To avoid the situation where the receiving entity confuses 7 binary
zero pad bits as the @ character, the carriage return or <CR>
character shall be used for padding in this situation [...].
If <CR> is intended to be the last character and the message
(including the wanted <CR>) ends on an octet boundary, then another
<CR> must be added together with a padding bit 0. The receiving entity
will perform the carriage return function twice, but this will not
result in misoperation as the definition of <CR> [...] is identical to
the definition of <CR><CR>.
The receiving entity shall remove the final <CR> character where the
message ends on an octet boundary with <CR> as the last character.
Jacob has verified the fix with fakeBTS and the wireshark dissector.
Fixes: OW#947
Reviewed-by: Jacob Erlbeck <jerlbeck@sysmocom.de>
|
|
This is required for encoding the SMS header using the alpha numeric
rules.
Reviewed-by: Jacob Erlbeck <jerlbeck@sysmocom.de>
|
|
In vty_cmd_string_from_valstr() include the real string lengths of
the sep and end arguments into the buffer size calculation.
|
|
Compiled with ubuntu 1204 (precise), where -Wformat-security is enabled by
-Wall.
Test yields ok, but the current implementation doesn't properly support
multi-character separators and end strings. So the test output is truncated.
Addresses:
utils.c: In function 'vty_cmd_string_from_valstr':
utils.c:84:2: warning: format not a string literal and no format arguments [-Wformat-security]
utils.c:84:2: warning: format not a string literal and no format arguments [-Wformat-security]
utils.c:108:2: warning: format not a string literal and no format arguments [-Wformat-security]
utils.c:108:2: warning: format not a string literal and no format arguments [-Wformat-security]
|
|
The code most likely wanted to check the result of argv_concat.
To do this we need to dereference the dptr.
Logically dead code (DEADCODE)
dead_error_line: Execution cannot reach this statement "return 1;
Fixes: Coverity CID 1040675
|
|
This is required for osmo-bsc to parse Alcatel S-12 CIPHER MODE COMMAND
in osmo-bsc.
|
|
lapdm.c takes the re-establishment message and forwards it to lapd_core.c,
so we can assume that msgb is set at primitive. In case there is data in
the re-establishment msg, it is moved into send_buffer. In case of no
data (0 length), it must be freed.
Fixes an issue spotted by Coverity Scan.
|
|
This reverts commit f996b05dbddccb8e8788dd69777a4fedfa2373eb
and 2b0cac4ef83137ee0bdd583aee877eac467abeab. A detailed
explanation can be found here:
http://lists.osmocom.org/pipermail/openbsc/2013-July/004737.html
The short description is that:
1.) The API should return (as out parameter) the number of
octets used.
2.) The handling for the <CR> encoding only applies to USSD
and it is incomplete. On top of that it broke the SMS test.
|
|
|
|
To avoid the situation where the receiving entity confuses 7 binary zero pad
bits as the @ character, the carriage return or <CR> character shall be used
for padding in this situation.
|
|
|
|
It is used to transfer PHYSICAL INFORMATION message to the MS.
|
|
If the datalink fails or if handover or assignment to a new channel fails,
it is re-establised by sending SABM again. The length of establish message
is 0 in this case. The length is used to differentiate between
re-establishment and contention resolution, which has to be handled
differently.
See TS 04.06 Chapter 5.4.2.1
|
|
It is impossible that the snprintf will fill the entire namebuf
but just follow the idiom to make sure it is null terminated.
Related: Coverity CID 1040676
|
|
These routines were not freeing vectors used for the lookup. On
review it is fixing another path not detected by coverity.
The danger is a double free in tab completion now. It is difficult
to test this.
Fixes: Coverity CID 23037, CID 23038
|
|
The &buf[3] is unlikely to be aligned properly. Use memcpy instead
of an assignment. Add a small testcase that verifies that I didn't
mess up the conversion.
Alignment trap: osmo-nitb (3293) PC=0x492b7094 Instr=0xe5803003 Address=0xbeb259db FSR 0x801
|
|
This already came up during review but now that Coverity complains
about it as well, let us just remove it. The variable is unsigned
so it can never be < 0.
Fixes: Coverity CID 1040669.
|
|
If the BTS tells us to not send any data at all anymore (bucket leak
rate of 0 bits per second), then we should respect this and not run into
a divide-by-zero. However, as this indicates complete overload, we
print a log message to that regard.
|
|
|
|
When a SABM(E) frame arrives, we have to trim the L2 padding (0x2b for
gsm) before handing the data off to L3, just like we do with I frames.
Also, we should use mggb_trim() or even msgb_l3trim() instead of
manually fiddling with msgb->length and ->tail pointers.
|
|
|
|
|
|
Make detecting use after free of the tx_hist easy and set the
variable to NULL after talloc_free has been freed.
|
|
|
|
After reception of SABM, the network responds with UA and enters the
establised multiframe state. If UA is not received by mobile, the SABM
is transmitted again, and the network must respond with UA again, unless
it is from a different mobile.
Add LAPDm collision test (contention resolution on network side).
|
|
Allow to tag the NS service with a custom DSCP.
|
|
|
|
This reverts commit a6428d2376034d619f342897d3ce415b3f9a3584.
|
|
This reverts commit cd6ed82d1ff48f47ad9e33e6322df62896a76ed5.
|
|
|
|
This function will re-open all existing log files in the application,
praticularly useful for SIGHUP handlers in case of logrotate
|
|
|
|
When we print information about the current logging configuration,
it makes sense to also print information about the log filters.
|
|
Only the Gb library relies on having undefined references to a
symbol that needs to be provided by the host application. For
all other libraries we can link with -no-undefined.
|
|
Seems the script I used to parse those had a bug where range of
bits in the 'decreasing' direction ( like 6..0 ) were not processed
properly.
Thanks to Andreas for noticing this !
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
Commit cd6ed82d1ff48f47ad9e33e6322df62896a76ed5 made "EVERYTHING"
map to LOGL_DEBUG but when writing out the configuration the following
would be written:
logging level all unknown 0x0
This happend because no string was found for the value 0. Address it
by adding a legacy check for 0 and write out the str from the index
0. Currently this is "EVERYTHING".
|
