aboutsummaryrefslogtreecommitdiffstats
path: root/src/gb
AgeCommit message (Collapse)AuthorFilesLines
2014-10-23gprs: Don't discard SUSPEND/RESUME in bssgp_rcvmsgJacob Erlbeck1-18/+26
Currently sending SUSPEND/RESUME messages to this function (like it is done in the osmo-sgsn) results in STATUS messages complaining about an unknown BVCI. The reason is, that these messages rely on a TLLI/RAI pair to identify the context and do not contain an explicit BVCI. This patch modifies bssgp_rcvmsg() to only complain about and unknown BVCI if one is given but a matching context is not found (except for RESET messages). The ctx argument is removed from the functions handling SUSPEND and RESUME since it will always be NULL then. Sponsored-by: On-Waves ehf
2014-10-10bssgp: Free msgb in case of error when calling into gprs_ns_sendmsgHolger Hans Peter Freyther1-0/+3
In the OsmoSGSN we have a crash with a DEAD/BLOCKED GPRS-NS and segmented SN-UNITDATA. For the caller it is not easy to know if the passed msg buffer has been freed or not. The most easy solution is to always take the ownership and either pass it on or free it in case of an error. Adjust indirect and direct callers of gprs_ns_sendmsg. I found the following call-chains with an external msgb parameter. gprs_ns_sendmsg <- _bssgp_tx_dl_ud <- bssgp_fc_in <- bssgp_tx_dl_ud Update the test to allocate a real msgb because for the test with '1000' we will msgb_free it right away. Sponsored-by: On-Waves ehf
2014-10-09gprs-ns: Fix reset state handlingJacob Erlbeck1-5/+4
Currently the NS-VC's state is updated from within gprs_ns_tx_reset, which can lead to an inconsistent state when the RESET_ACK is lost. In this state, the NSE_S_RESET bit is set but the Tns-reset timer is not started. This patch moves the state update into gprs_nsvc_reset. This way, the state flags are consistent with the timer. Addresses: SGSN -> BSS NS_ALIVE BSS -> SGSN NS_ALIVE_ACK BSS -> SGSN BVC_RESET SGSN -> BSS NS_STATUS, Cause: NS-VC blocked, NS VCI: 0x65 and there is no BSS->SGSN NS_ALIVE Ticket: OW#1213 Sponsored-by: On-Waves ehf
2014-10-09gprs-ns: Let gprs_nsvc_reset return a valueJacob Erlbeck1-2/+7
Currently gprs_nsvc_reset does not return any value. This patch changes the function to return an integer, where a value less than zero indicates an error. The value is taken from the gprs_ns_tx_reset function. In case of failure, an error message is logged. Sponsored-by: On-Waves ehf
2014-10-03build: remove unused all_includes and use AM_CPPFLAGSJan Engelhardt1-1/+2
Preprocessor flags are best placed in AM_CPPFLAGS. Remove use of the unused all_includes variable, which is never set.
2014-09-25misc: Look into the build directory for generated filesHolger Hans Peter Freyther1-1/+1
the bits/crc files are not inside the sourcedirectory but will end in the build directory. Go and look there as well. This somehow doesn't fail with make distcheck but when building for Yocto Dizzy.
2014-09-23gprs: Set bssgph field in bssgp_msgb_alloc()Jacob Erlbeck1-1/+3
Currently the bssgph field is not set when using the bssgp_tx_* functions. This hinders unit testing of generated messages. This patch initializes the bssgph field directly after allocation a new bssgp msgb in bssgp_msgb_alloc() so that it is set by default. Sponsored-by: On-Waves ehf
2014-09-23gprs: Fix bssgp_rcvmsg to handle signalling msgs with BVCI IEJacob Erlbeck1-3/+7
Currently BSSGP messages with an NS BVCI of 0 (signalling) are discarded if they aren't RESET messages. Thus valid signalling messages (e.g. BLOCK) are not handled properly, because the BVCI IE is ignored if it present. Instead a STATUS message referring to BVCI 0 (instead of the BVCI used in the BLOCK message) is returned. This patch changes the implementation to use the BVCI contained in the BVCI IE if that is present in a signalling message. It fixes BSSGP BLOCK/UNBLOCK for the osmo-sgsn. Note that signalling messages without an BVCI IE (e.g. SUSPEND/RESUME) are still rejected. Ticket: OW#1205 Sponsored-by: On-Waves ehf
2014-09-23gprs: Fix and check BVCI in BSSGP STATUS messagesJacob Erlbeck2-1/+15
Currently the BVCI is not set in all invocations to bssgp_tx_status() when the cause is UNKNOWN_BVCI. This patch adds the argument where it is missing. It also adds a check for compliance (GSM 08.18, 10.4.14.1) to bssgp_tx_status() to emit errors when the following requirement is not fulfilled: The BVCI must be included if (and only if) the cause is either "BVCI blocked" or "BVCI unknown". Sponsored-by: On-Waves ehf
2014-08-21prepare for 0.7.0 release0.7.0Harald Welte1-1/+1
2014-07-07gprs-ns: Re-initialize the list head and free the unknown_nsvcHolger Hans Peter Freyther1-0/+3
Fix re-initialize issue of the GPRS NS. This was found while working on the GB Proxy tests. ==27800== Invalid write of size 4 ==27800== at 0x403C263: rate_ctr_group_alloc (linuxlist.h:65) ==27800== by 0x4050974: gprs_nsvc_create (gprs_ns.c:209) ==27800== by 0x405320D: gprs_ns_instantiate (gprs_ns.c:1330) ==27800== by 0x804B212: main (gbproxy_test.c:797) ==27800== Address 0x434173c is 52 bytes inside a block of size 784 free'd ==27800== at 0x4029DA8: free (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so) ==27800== by 0x4041BBD: _talloc_free (talloc.c:609) ==27800== by 0x40432B2: talloc_free (talloc.c:578) ==27800== by 0x40532D3: gprs_ns_destroy (gprs_ns.c:1363) ==27800== by 0x804B1FE: main (gbproxy_test.c:791)
2013-11-22gb: Remove comment about ABI changes from the MakefileHolger Hans Peter Freyther1-3/+0
Okay. this comment thing has not worked (I totally forgot about it). I think either we try to find ABI breakages with tools or we use #error macros and check for a version...
2013-11-11gprs: Fix VTY NSVC initialisation bug by changing gprs_nsvc_create()Jacob Erlbeck1-3/+3
Currently the field nsvci_is_valid is set to 0 in the NSVC object returned by gprs_nsvc_create(). This was a semantic change probably introduced by commit 5e6d679d. As a result, NSVC created via the VTY have this flag set to 0 causing RESET_ACK messages to be rejected. This patch changes the default behaviour of gprs_nsvc_create() to always set this flag. So it must be set to 0 explicitely if needed which is more intuitive and thus less error prone. It fixes breaking connections from the Gbproxy to the SGSN. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-30gprs: Ignore NS RESET_ACK and ALIVE_ACK without RESETJacob Erlbeck1-0/+17
Currently those messages are answered by a NS_STATUS message when received on an uninitialised (no NS_RESET hat been seen yet) NS_VC which violates GPP TS 08.16 7.3.1 and 7.4.1. This patch adds checks to gprs_ns_vc_create() and eventually returns before the error NS_STATUS message is generated. Sponsored-by: On-Waves ehf
2013-10-25gprs: Address coverity warning for gprs_ns_tx_status resultHolger Hans Peter Freyther1-8/+10
Add a #define for the check and use this in this path as well. Fixes: Coverity CID 1103092
2013-10-25gprs: Address coverity warning on unchecked return of gprs_ns_tx_reset_ackHolger Hans Peter Freyther1-1/+5
Fixes: Coverity CID 1111545
2013-10-25gprs: Address coverity warning on unchecked return of gprs_ns_tx_statusHolger Hans Peter Freyther1-1/+4
We could consider creating a CHECK MACRO that will print a message in case of a tx failure. Fixes: Coverity CID 1111544
2013-10-25gprs: Make sure that the buf is NULL terminated at the endHolger Hans Peter Freyther1-0/+1
Fixes: Coverity CID 1107253
2013-10-24gb: Create new NSVC object instead of patching the NSVCIJacob Erlbeck1-4/+12
When a RESET is received on the same link with a different NSVCI from a BSS on a dynamically created NS connection do not patch the nsvc object but create a new one instead. Thus the NSVCI is never modified at a nsvc object after the NS-VC has been established. Sponsored-by: On-Waves ehf
2013-10-24gb: Fix RESET handling with changing NSEIJacob Erlbeck1-28/+40
This modifies the NS stack's behavior to accept RESET and RESET_ACK NSEI changes for NS-VC dynamically created by RESET messages from BSSes. This feature is not used for NS-VC configured via VTY or NS-VC to a SGSN. Sponsored-by: On-Waves ehf
2013-10-24gb: Fix NS RESET/RESET_ACK abnormal casesJacob Erlbeck1-56/+215
This changes the implementations for the reception of RESET and RESET_ACK to be compatible with 3GPP TS 08.16, 7.3.1: - Just send a RESET_ACK with correct values back to the SGSN when a RESET with an invalid NSVCI or NSEI has been received. - Check RESET_ACK for matching NSEI and NSVCI. - Ignore unexpected RESET_ACKs. In addition, use RESET_ACK from a BSS to update the BSS source address based on the NSVCI to be tolerant with changing UDP source addresses/ports. Sponsored-by: On-Waves ehf
2013-10-24gb: Fix gprs_nsvc_delete() to free ctr groupJacob Erlbeck1-0/+1
This fixes a SEGV error that happens the next time the statistics are updated. Addresses: Program terminated with signal 11, Segmentation fault. #0 0xb7711fa5 in rate_ctr_group_intv (grp=<optimized out>) at rate_ctr.c:107 107 for (i = 0; i < grp->desc->num_ctr; i++) { #0 0xb7711fa5 in rate_ctr_group_intv (grp=<optimized out>) at rate_ctr.c:107 #1 rate_ctr_timer_cb (data=0x0) at rate_ctr.c:129 #2 0xb770ec59 in osmo_timers_update () at timer.c:243 #3 0xb770ef7a in osmo_select_main (polling=0) at select.c:133 #4 0x08049987 in main (argc=3, argv=0xbfba8084) at gb_proxy_main.c:306 Sponsored-by: On-Waves ehf
2013-10-24gb/vty: Fix the VTY node string for L_NS_NODEJacob Erlbeck1-1/+1
Use 'config-ns' instead of plain 'ns' and append a blank after the '#' to make the vty python test script work. Sponsored-by: On-Waves ehf
2013-10-24gb/vty: Perform NS-VC operations based on NS-VCIJacob Erlbeck1-5/+15
This adds a 'nsvc nsvci <0-65535> (block|unblock|reset)' vty command. It selects the NS-VC based on the nsvci instead of using the first with a matching NSEI, like it is done when the 'nsei' keyword is used instead. Sponsored-by: On-Waves ehf
2013-10-17gb: Fix gprs_active_nsvc_by_nsei()Jacob Erlbeck1-2/+2
The state matching condition is inverted. This is corrected by this fix. Sponsored-by: On-Waves ehf
2013-10-15release: Prepare the 0.6.4 release of libosmocore0.6.4Holger Hans Peter Freyther1-1/+1
New interfaces and ABI incompatible changes in the GB library
2013-10-15gb: Fix gprs_ns_rx_reset to not create NS-VC duplicatesJacob Erlbeck1-74/+149
Under special circumstances (see below) receiving a NS-RESET leads to duplicated NS-VC entries. This happens when the source port of a NS-VC changes to a new one that has already been used by another NS-VC. This patch changes gprs_ns_rx_reset() to check for this case and to use the existing NS-VC object. The NS-VC object that was associated with the source address before is detached from this source but kept in the NS-VC list so that it can be reattached when a correspondent NS-RESET is received later on. Meanwhile it will have a cleared link layer address which will not match a real link info. A new counter NS_CTR_REPLACED is incremented each time when the NS-VC object is replacing another one. A new signal S_NS_REPLACED is added which gets dispatched in this case, too. Another new counter NS_CTR_NSEI_CHG is incremented each time when the NSEI of a NS-VC object (with fixed NSVCI) changes. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-15gb: Add functions to access the LL part of the NS-VC objectsJacob Erlbeck2-6/+40
Adds the functions gprs_ns_ll_copy() and gprs_ns_ll_clear(). Renames gprs_ns_format_peer() to gprs_ns_ll_str(). All of these functions uniformly access the link layer part within the NS-VC objects. Sponsored-by: On-Waves ehf
2013-10-14gb: When sending on a NS-VC group use the first active NS-VCJacob Erlbeck1-18/+29
Currently this first NS-VC with a matching NSEI is always used to send a UNITDATA message via gprs_ns_sendmsg(). If the NS-VC found is either dead or blocked, an error is returned. This patch changes to code to skip blocked or dead NS-VCs while searching and return the error if no usable NS-VC is found. This makes it possible to have several NS-VCs per connection group. Sponsored-by: On-Waves ehf
2013-10-11tests/gb: Show invoked signals in test outputJacob Erlbeck1-0/+1
Register an osmo signal handler to print a short notice about every SS_L_NS signal that is generated while processing the tests. Sponsored-by: On-Waves ehf
2013-10-08gb: Use the NS-VCI to find an existing NS-VCJacob Erlbeck1-4/+4
Currently when a NS-RESET is recevied over a link that has not yet been associated with a NS-VC, the NSEI is used to find an existing NS-VC. If one is found, the reset procedure is initiated. This behaviour is not conformant with 3GPP TS 08.16 (see chapter 4.2.3) which allows to use several NS-VC between two endpoints in parallel. The patch changes the implementation to use the NSVCI instead of the NSEI to search for an existing NS-VC object. Ticket: OW#874 Sponsored-by: On-Waves ehf
2013-10-08gb: Fix NS-RESET response message orderJacob Erlbeck1-5/+7
According to 3GPP TS 08.16, 7.3 "Reset procedure" the entity receiving a NS-RESET PDU responds with a NS-RESET-ACK and 'then' starts the test procedure which essentially means, that a NS-ALIVE gets sent and a timer is started. Currently the NS-ALIVE is sent before the NS-RESET-ACK. This patch fixes the implementation by reversing the order in which these messages are sent. Sponsored-by: On-Waves ehf
2013-10-08gb: Separate nsvc creation from NS message processingJacob Erlbeck1-55/+144
This patch refactors gprs_ns_rcvmsg() by moving the parts relevant to the NS messages into the new functions gprs_ns_vc_create() (nsvc object creation) and gprs_ns_process_msg() (main NS automaton). These do not contain code that directly depends on the link layer (they call other functions that still do). This reduces the gprs_ns_rcvmsg() function to calling these two functions and optionally setting up the link layer specific fields of the nsvc. Sponsored-by: On-Waves ehf
2013-07-06libosmogb: Add function to close NS instance without destroying itHolger Hans Peter Freyther2-7/+13
2013-06-29BSSGP: prevent divide-by-zero in flow controlHarald Welte1-10/+33
If the BTS tells us to not send any data at all anymore (bucket leak rate of 0 bits per second), then we should respect this and not run into a divide-by-zero. However, as this indicates complete overload, we print a log message to that regard.
2013-03-25gprs_ns: Allow to set the DSCP for the UDP socket.Holger Hans Peter Freyther3-0/+24
Allow to tag the NS service with a custom DSCP.
2013-01-12Fix build on CygwinEvgeny Zverev1-1/+5
2012-12-11build: Don't use the deprecated INCLUDES in the various Makefile.amSylvain Munaut1-2/+1
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2012-10-27Do not use --version-script linker flag on OSXTobias Engel1-1/+1
Add a check to not use --version-script linker flag if compiled on OSX since it doesn't exist there
2012-10-27Define struct iphdr for OSXTobias Engel1-1/+1
Use FreeBSD struct iphdr definition for OSX also. From the commentary in the source file: On BSD the IPv4 struct is called struct ip and instead of iXX the members are called ip_XX. One could change this code to use struct ip but that would require to define _BSD_SOURCE and that might have other complications. Instead make sure struct iphdr is present on FreeBSD.
2012-09-30Doc: Adding new parameter descriptions in gprs_bssgp_bss.cAndreas Eversberg1-1/+9
2012-09-30Fix: Correcting bssgp_tx_fc_bvc, bssgp_tx_fc_ms, bssgp_tx_ul_udAndreas Eversberg2-9/+28
2012-09-29Fix: gprs_ns_destroy() now frees all NSVCs and its timersAndreas Eversberg1-4/+14
Freeing memory of registered timers and file descriptors cause corrupt lists.
2012-09-10Gb: Add functions for sending flow control messages from BSS sideHarald Welte1-0/+105
2012-09-10Gb: Add header file for BSS-side BSSGP functionsHarald Welte1-0/+1
.. not sure how we could have missed that so far.
2012-09-08libosmogb: make build conditional, disable in embedded buildHarald Welte1-0/+2
when we build for osmocom-bb cross-compilation, we don't have sockets nor netinet/in.h and thus NS/BSSGP make no sense...
2012-09-07BSSGP: print per-bvc flow control parameters on vtyHarald Welte1-1/+12
2012-09-07BSSGP: make bvc_ctx->fc a dynamic talloc allocationHarald Welte1-5/+7
this ensures that we can talloc the flow-control queue entries as siblings off the bvc_ctx.
2012-09-07BSSGP flow-control: various fixesHarald Welte2-10/+36
* add more comments on units of struct members * make sure to parsre FC-BVC message correctly * add error message in case user passes PDU larger than bucket size * add new function to initialize flow control struct
2012-09-07libosmogb: Port BSSGP flow control from openbsc/laforge/bssgp_fc branchHarald Welte2-4/+225
This code is supposed to implement the BSSGP flow control algorithm, both for the per-BSS and for the per-MS flow control. The code currently has no test cases, they will come in a separate commit.
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-04 04:30:05 +0000