| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This way we have all libosmocore.so in an own subdir instead of having
lots of files in the parent dir, which also contains subdirs to other
libraries.
This also matches the schema under include/osmocom/.
Change-Id: I6c76fafebdd5e961aed88bbecd2c16bc69d580e2
|
|
Change-Id: I98cde213deb5a3bf39eb9f5e5451f40223632844
|
|
As was demonstrated in [1], osmo_fsm_inst_state_chg_ms() is broken.
The problem is in state_chg(): this function is passing *milli*seconds
to osmo_timer_schedule(), while it expects *micro*seconds.
Change-Id: Ib0b6c3bdb56e4279df9e5ba7db16841645c452aa
Related: [1] I5a35730a8448292b075aefafed897353678250f9
Fixes: I35b330e460e80bb67376c77e997e464439ac5397
Fixes: OS#5622
|
|
Remove the paragraph about writing to the Free Software Foundation's
mailing address. The FSF has changed addresses in the past, and may do
so again. In 2021 this is not useful, let's rather have a bit less
boilerplate at the start of source files.
Change-Id: I5050285e75cf120407a1d883e99b3c4bcae8ffd7
|
|
Change-Id: I199085e717c6ebdc9061a0c9fa9a96bfbc11a74a
|
|
This is a helper function to broadcast an event to all of the
siblings of a specified FSM instance.
Change-Id: I2ce398741a8672d7b7c4058d056f46e2fe7353c1
|
|
Refuse state changes and event dispatch for FSM instances that are already
terminating.
It is assumed that refusing state changes and events after FSM termination is
seen as the sane expected behavior, hence this change in behavior is merged
without being configurable.
There is no fallout in current Osmocom code trees. fsm_dealloc_test needs a
changed expected output, since it is explicitly creating complex FSM structures
that terminate. Currently no other C test in Osmocom code needs adjusting.
Rationale:
Where multiple FSM instances are collaborating (like in osmo-bsc or osmo-msc),
a terminating FSM instance often causes events to be dispatched back to itself,
or causes state changes in FSM instances that are already terminating. That is
hard to avoid, since each FSM instance could be a cause of failure, and wants
to notify all the others of that, which in turn often choose to terminate.
Another use case: any function that dispatches events or state changes to more
than one FSM instance must be sure that after the first event dispatch, the
second FSM instance is in fact still allocated. Furthermore, if the second FSM
instance *has* terminated from the first dispatch, this often means that no
more actions should be taken. That could be done by an explicit check for
fsm->proc.terminating, but a more general solution is to do this check
internally in fsm.c.
In practice, I need this to avoid a crash in libosmo-mgcp-client, when an
on_success() event dispatch causes the MGCP endpoint FSM to deallocate. The
earlier dealloc-in-main-loop patch fixed part of it, but not all.
Change-Id: Ia81a0892f710db86bd977462730b69f0dcc78f8c
|
|
This is a simpler and more general solution to the problem so far solved by
osmo_fsm_term_safely(true). This extends use-after-free fixes to arbitrary
functions, not only FSM instances during termination.
The aim is to defer talloc_free() until back in the main loop.
Rationale: I discovered an osmo-msc use-after-free crash from an invalid
message, caused by this pattern:
void event_action()
{
osmo_fsm_inst_dispatch(foo, FOO_EVENT, NULL);
osmo_fsm_inst_dispatch(bar, BAR_EVENT, NULL);
}
Usually, FOO_EVENT takes successful action, and afterwards we also notify bar.
However, in this particular case, FOO_EVENT caused failure, and the immediate
error handling directly terminated and deallocated bar. In such a case,
dispatching BAR_EVENT causes a use-after-free; this constituted a DoS vector
just from sending messages that cause *any* failure during the first event
dispatch.
Instead, when this is enabled, we do not deallocate 'foo' until event_action()
has returned back to the main loop.
Test: duplicate fsm_dealloc_test.c using this, and print the number of items
deallocated in each test loop, to ensure the feature works. We also verify that
the deallocation safety works simply by fsm_dealloc_test.c not crashing.
We should probably follow up by refusing event dispatch and state transitions
for FSM instances that are terminating or already terminated:
see I0adc13a1a998e953b6c850efa2761350dd07e03a.
Change-Id: Ief4dba9ea587c9b4aea69993e965fbb20fb80e78
|
|
when using gcc 8.3.0 on Debian unstable and doing an embedded build,
I'm getting the following error:
> fsm.c:621:40: error: format '%ld' expects argument of type
> 'long int', but argument 6 has type 'time_t {aka long long int}'
> [-Werror=format=]
Let's avoid that...
Change-Id: I92fb9b08def8475739f0dc6316de43b166f48ac3
|
|
This reverts commit b3f94eb39e19366c3458643ee329a73155d46ff8, that
unfortunately breaks some projects which call osmo_fsm_register()
on DSO load (i.e. using __attribute__((constructor))) before the
logging is initialized.
Change-Id: Idc6fcce7e946c23d48589b920e309d60aa7b6645
|
|
As suggested by Vadim while reviewing a related fix for ipa_keepalive.c
in libosmo-abis (see https://gerrit.osmocom.org/#/c/libosmo-abis/+/13540/),
it makes sense to print an error message if anyone registers a FSM
that specifies an allstate_action callback but at the same time no
events that would ever end up in that callback.
Change-Id: I9e73f7363ab15a00843e3f0d1e5776f4be7ebc46
|
|
Instead of copy+pasting the same LOGPFSMSRC("State change to " ...)
with slightly different trailer depending on the FSM timer, let's first
snprintf() to a stack variable and then have a single log statement.
Change-Id: I49528c4ca1fa11aef09c2092615dccca450b847c
|
|
So far, the public API of osmo_fsm only allowed integral seconds as
timeout. Let's change that to milli-seconds in order to cover more
use cases.
This introduces
* osmo_fsm_inst_state_chg_ms()
* osmo_fsm_inst_state_chg_keep_or_start_timer_ms()
Which both work exactly like their previous counterparts without the _ms
suffix - the only difference being that the timeout parameter is
specified in milli-seconds, not in seconds.
The value range for an unsigned long in milli-seconds even on a 32bit
platform extends to about 48 days.
This patch also removes the documentation notice about limiting the
maximum value to 0x7fffffff due to time_t signed-ness. We don't use
time_t but unsigned long.
Change-Id: I35b330e460e80bb67376c77e997e464439ac5397
|
|
We have a number of library-internal static global buffers which are
mainly used for various stringification functions. This worked as
all of the related Osmocom programs were strictly single-threaded.
Let's make those buffers at least thread-local. This way every thread
gets their own set of buffers, and it's safe for multiple threads to
execute the same functions once. They're of course still not
re-entrant. If you need re-entrancy, you will need to use the _c()
or _buf() suffix version of those functions and work with your own
(stack or heap) buffers.
Change-Id: I50eb2436a7c1261d79a9d2955584dce92780ca07
|
|
Change-Id: I3559e9c0769b708cee0d1b221b60960c62f15bd4
|
|
We often compose FSM instance IDs from context information, for example placing
an MSISDN string or IP:port information in the FSM instance id, using
osmo_fsm_inst_update_id_f(). This fails if any characters are contained that
don't pass osmo_identifier_valid(). Hence it is the task of the caller to make
sure only characters allowed in an FSM id are applied.
Provide API to trivially allow this by replacing illegal chars:
- osmo_identifier_sanitize_buf(), with access to the same set of illegal
characters defined in utils.c,
- osmo_fsm_inst_update_id_f_sanitize() implicitly replaces non-identifier
chars.
This makes it easy to add strings like '192.168.0.1:2342' or '+4987654321' to
an FSM instance id, without adding string mangling to each place that sets an
id; e.g. replacing with '-' to yield '192-168-0-1:2342' or '-4987654321'.
Change-Id: Ia40a6f3b2243c95fe428a080b938e11d8ab771a7
|
|
Add global flag osmo_fsm_term_safely() -- if set to true, enable the following
behavior:
Detect osmo_fsm_inst_term() occuring within osmo_fsm_inst_term():
- collect deallocations until the outermost osmo_fsm_inst_term() is done.
- call osmo_fsm_inst_free() *after* dispatching the parent event.
If a struct osmo_fsm_inst enters osmo_fsm_inst_term() while another is already
within osmo_fsm_inst_term(), do not directly deallocate it, but talloc-reparent
it to a separate talloc context, to be deallocated with the outermost FSM inst.
The effect is that all osmo_fsm_inst freed within an osmo_fsm_inst_term()
cascade will stay allocated until all osmo_fsm_inst_term() are complete and all
of them will be deallocated at the same time.
Mark the deferred deallocation state as __thread in an attempt to make cascaded
deallocation handling threadsafe. Keep the enable/disable flag separate, so
that it is global and not per-thread.
The feature is showcased by fsm_dealloc_test.c: with this feature, all of those
wild deallocation scenarios succeed.
Make fsm_dealloc_test a normal regression test in testsuite.at.
Rationale:
It is difficult to gracefully handle deallocations of groups of FSM instances
that reference each other. As soon as one child dispatching a cleanup event
causes its parent to deallocate before fsm.c was ready for it, deallocation
will hit a use-after-free. Before this patch, by using parent_term events and
distinct "terminating" FSM states, parent/child FSMs can be taught to wait for
all children to deallocate before deallocating the parent. But as soon as a
non-child / non-parent FSM instance is involved, or actually any other
cleanup() action that triggers parent FSMs or parent talloc contexts to become
unused, it is near impossible to think of all possible deallocation events
ricocheting, and to avoid running into freeing FSM instances that were still in
the middle of osmo_fsm_inst_term(), or FSM instances to enter
osmo_fsm_inst_term() more than once. This patch makes deallocation of "all
possible" setups of complex cross referencing FSM instances easy to handle
correctly, without running into use-after-free or double free situations, and,
notably, without changing calling code.
Change-Id: I8eda67540a1cd444491beb7856b9fcd0a3143b18
|
|
To prevent re-entering osmo_fsm_inst_term() twice for the same osmo_fsm_inst,
add flag osmo_fsm_inst.proc.terminating. osmo_fsm_inst_term() sets this to
true, or exits if it already is true.
Update fsm_dealloc_test.err for illustration. It is not relevant for unit
testing yet, just showing the difference.
Change-Id: I0c02d76a86f90c49e0eae2f85db64704c96a7674
|
|
Change-Id: Ibc63a5d4442a192efab8b5b30e0beb3545642ecc
|
|
During FSM design for osmo-msc, I noticed that the current behavior that
keep_timer=true doesn't guarantee a running timer can make FSM design a bit
complex, especially when using osmo_tdef for timeout definitions.
A desirable keep_timer=true behavior is one that keeps the previous timer
running, but starts a timer if no timer is running yet.
The simplest example is: a given state repeatedly transitions back to itself,
but wants to set a timeout only on first entering, avoiding to restart the
timeout on re-entering.
Another example is a repeated transition between two or more states, where the
first time we enter this group a timeout should start, but it should not
restart from scratch on every transition.
When using osmo_tdef timeout definitions for this, so far separate meaningless
states have to be introduced that merely set a fixed timeout.
To simplify, add osmo_fsm_inst_state_chg_keep_or_start_timer(), and use this in
osmo_tdef_fsm_inst_state_chg() when both keep_timer == true *and* T != 0.
In tdef_test.ok, the changes show that on first entering state L, the previous
T=1 is now kept with a large remaining timeout. When entering state L from O,
where no timer was running, this time L's T123 is started.
Change-Id: Id647511a4b18e0c4de0e66fb1f35dc9adb9177db
|
|
fi->T values are int, i.e. can be negative. Do not log them as unsigned, but
define a distinct timer class "Xnnnn" for negative T values: i.e. for T == -1,
print "Timeout of X1" instead of "Timeout of T4294967295".
The negative T timer number space is useful to distinguish freely invented
timers from proper 3GPP defined T numbers. So far I was using numbers like
T993210 or T9999 for invented T, but X1, X2 etc. is a better solution. This way
we can make sure to not accidentally define an invented timer number that
actually collides with a proper 3GPP specified timer number that the author was
not aware of at the time of writing.
Add OSMO_T_FMT and OSMO_T_FMT_ARGS() macros as standardized timer number print
format. Use that in fsm.c, tdef_vty.c, and adjust vty tests accordingly.
Mention the two timer classes in various API docs and VTY online-docs.
Change-Id: I3a59457623da9309fbbda235fe18fadd1636bff6
|
|
Add a flag that adds timeout info to osmo_fsm_inst state change logging.
To not affect unit testing, make this an opt-in feature that is disabled by
default -- mostly because osmo_fsm_inst_state_chg_keep_timer() will produce
non-deterministic logging depending on timing (logs remaining time).
Unit tests that don't verify log output and those that use fake time may also
enable this feature. Do so in fsm_test.c.
The idea is that in due course we will add osmo_fsm_log_timeouts(true) calls to
all of our production applications' main() initialization.
Change-Id: I089b81021a1a4ada1205261470da032b82d57872
|
|
Move T_def from osmo-bsc to libosmocore as osmo_tdef. Adjust naming to be more
consistent. Upgrade to first class API:
- add timer grouping
- add generic vty support
- add mising API doc
- add C test
- add VTY transcript tests, also as examples for using the API
From osmo_fsm_inst_state_chg() API doc, cross reference to osmo_tdef API.
The root reason for moving to libosmocore is that I want to use the
mgw_endpoint_fsm in osmo-msc for inter-MSC handover, and hence want to move the
FSM to libosmo-mgcp-client. This FSM uses the T_def from osmo-bsc. Though the
mgw_endpoint_fsm's use of T_def is minimal, I intend to use the osmo_tdef API
in osmo-msc (and probably elsewhere) as well. libosmocore is the most sensible
place for this.
osmo_tdef provides:
- a list of Tnnnn (GSM) timers with description, unit and default value.
- vty UI to allow users to configure non-default timeouts.
- API to tie T timers to osmo_fsm states and set them on state transitions.
- a few standard units (minute, second, millisecond) as well as a custom unit
(which relies on the timer's human readable description to indicate the
meaning of the value).
- conversion for standard units: for example, some GSM timers are defined in
minutes, while our FSM definitions need timeouts in seconds. Conversion is
for convenience only and can be easily avoided via the custom unit.
By keeping separate osmo_tdef arrays, several groups of timers can be kept
separately. The VTY tests in tests/tdef/ showcase different schemes:
- tests/vty/tdef_vty_test_config_root.c:
Keep several timer definitions in separately named groups: showcase the
osmo_tdef_vty_groups*() API. Each timer group exists exactly once.
- tests/vty/tdef_vty_test_config_subnode.c:
Keep a single list of timers without separate grouping.
Put this list on a specific subnode below the CONFIG_NODE.
There could be several separate subnodes with timers like this, i.e.
continuing from this example, sets timers could be separated by placing
timers in specific config subnodes instead of using the global group name.
- tests/vty/tdef_vty_test_dynamic.c:
Dynamically allocate timer definitions per each new created object.
Thus there can be an arbitrary number of independent timer definitions, one
per allocated object.
T_def was introduced during the recent osmo-bsc refactoring for inter-BSC
handover, and has proven useful:
- without osmo_tdef, each invocation of osmo_fsm_inst_state_chg() needs to be
programmed with the right timeout value, for all code paths that invoke this
state change. It is a likely source of errors to get one of them wrong. By
defining a T timer exactly for an FSM state, the caller can merely invoke the
state change and trust on the original state definition to apply the correct
timeout.
- it is helpful to have a standardized config file UI to provide user
configurable timeouts, instead of inventing new VTY commands for each
separate application of T timer numbers.
Change-Id: Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5
|
|
During testing of the upcoming tdef API, it became apparent that passing very
large timeout values to osmo_fsm_inst_state_chg() wraps back in the number
range, and might actually result in effectively very short timeouts instead.
Since time_t's range is not well defined across platforms, use a reasonable
maximum value of signed 32 bit integer. Hence this will be safe at least on
systems with an int32_t for struct timeval.tv_sec and larger.
Clamp the osmo_fsm_inst_state_chg() timeout_secs argument to a maximum of
0x7fffffff, which amounts to just above 68 years:
float(0x7fffffff) / (60. * 60 * 24 * 365.25) = 68.04965038532715
(In upcoming patch Ibd6b1ed7f1bd6e1f2e0fde53352055a4468f23e5, this can be
verified to work by invoking tdef_test manually with a cmdline argument passed
to enable the range check.)
Change-Id: I35ec4654467b1d6040c8aa215049766089e5e64a
|
|
Before this patch, if timeout_secs == 0 was passed to
osmo_fsm_inst_state_chg(), the previous T value remained set in the
osmo_fsm_inst->T.
For example:
osmo_fsm_inst_state_chg(fi, ST_X, 23, 42);
// timer == 23 seconds; fi->T == 42
osmo_fsm_inst_state_chg(fi, ST_Y, 0, 0);
// no timer; fi->T == 42!
Instead, always set to the T value passed to osmo_fsm_inst_state_chg().
Adjust osmo_fsm_inst_state_chg() API doc; need to rephrase to accurately
describe the otherwise unchanged behaviour independently from T.
Verify in fsm_test.c.
Rationale: it is confusing to have a T number remaining from some past state,
especially since the user explicitly passed a T number to
osmo_fsm_inst_state_chg(). (Usually we are passing timeout_secs=0, T=0).
I first thought this behavior was introduced with
osmo_fsm_inst_state_chg_keep_timer(), but in fact osmo_fsm_inst_state_chg()
behaved this way from the start.
This shows up in the C test for the upcoming tdef API, where the test result
printout was showing some past T value sticking around after FSM state
transitions. After this patch, there will be no such confusion.
Change-Id: I65c7c262674a1bc5f37faeca6aa0320ab0174f3c
|
|
The api documentation of osmo_fsm_state_name() refers to an FSM
instance, but it really means the state of an FSM.
Change-Id: I88ddd6048426d380c49170e66f57b3843398c046
|
|
Change-Id: I3c0e53b846b2208bd201ace99777f2286ea39ae8
|
|
The FSM allows to set individual action callback functions for each
state but it does not allow to leave the action callback pointer
unpopulated. However, there are cornercases where having no callback
function is desirable.
- Check if action callback is popolated before executing it.
Change-Id: I36d221c973d3890721ef1d376fb9be82c4311378
|
|
In the osmo-msc, I would like to set the subscr conn FSM identifier by a string
format, to include the type of Complete Layer 3 that is taking place. I could
each time talloc a string and free it again. This API is more convenient.
From osmo_fsm_inst_update_id(), call osmo_fsm_inst_update_id_f() with "%s" (or
pass NULL).
Put the name updating into separate static update_name() function to clarify.
Adjust the error message for erratic ID: don't say "allocate", it might be from
an update. Adjust test expectation.
Change-Id: I76743a7642f2449fd33350691ac8ebbf4400371d
|
|
On erratic id in osmo_fsm_inst_update_id(), don't say "Attempting to allocate
FSM instance".
Escape the invalid id using osmo_quote_str().
Change-Id: I770fc460de21faa42b403f694e853e8da01c4bef
|
|
Since alloc relies on osmo_fsm_inst_update_id() to set the name, never skip
that.
In osmo_fsm_inst_alloc(), we allow passing a NULL id, and in
osmo_fsm_inst_update_id(), we set the name without id if id is NULL.
Change-Id: I6d6b09a811b82770818f19b189a57d9fc4a8133b
|
|
strcmp() *must not* be passed NULL pointers, or we hit:
../../../src/libosmocore/src/fsm.c:123:8: runtime error: null pointer passed as argument 2, which is declared to never be null
ASAN:DEADLYSIGNAL
(Or, alternatively, a segfault.)
If any of the search string or an FSM instance's name string should be NULL,
simply never match.
Technically, an FSM should never have a NULL name, but a current bug actually
allows this (pass NULL id to alloc), which will be addressed by an upcoming
patch. To test for it, we need to first make sure this here doesn't segfault.
Change-Id: I2e5f82c06d1a4727bd93e955366e3b62b2df1b32
|
|
If the name stays the same the log messages will still log with the old
id. Since we can now change the id we need to update the name as well.
NULL as id was allowed before so we should allow that as well.
Change-Id: I6b01eb10b8a05fee3e4a5cdefdcf3ce9f79545b4
|
|
Event names are displayed in VTY commands so all FSM should have them.
Print an error message if an FSM is registered without event names.
We could also return an error code, however at present no caller checks
the return value of osmo_fsm_register() so this would be pointless.
Add event names to the test FSM and update expected output accordingly.
Change-Id: I08b100d62b5c50bf025ef87d31ea39072539cf37
Related: OS#3008
|
|
The function _osmo_fsm_inst_term() terminates all child FSMs befor
it calls fi->fsm_cleanup(). This prevents the cleanup callback to
perform last actions on the child FSMs (e.g.
osmo_fsm_inst_unlink_parent()).
- Since moving the cleanup callack to the beginning of the function
would alter the termination behavior and possibly cause malfunction
in already existing implementation that use OSMO fsm, a new
optional callback that is called immediately at the beginning of
the terminatopn process is added.
Change-Id: I0fdda9fe994753f975a658c0f3fb3615949cc8bb
Closes: OS#2915
|
|
Sometimes we want to create an FSM instance before we know its name. In
that case we should be able to update the id later.
Change-Id: Ic216e5b11d4440f8e106a297714f4f06c1152945
|
|
This reverts commit 5ec91980ac2224aa1e9bf070a0e382d0d8c2b729.
More or less like I expected, it creates fall-out. osmo-msc master builds are failing, as are the open build service builds. The patch has therefor *not* been sufficiently tested.
Change-Id: I8d961d7bbd91b6a8d7691f24cb67720c3d001c7e
|
|
The function _osmo_fsm_inst_term() terminates all child FSMs befor
it calls fi->fsm_cleanup(). This prevnts the cleanup callback to
perform last actions on the child FSMs (e.g.
osmo_fsm_inst_unlink_parent()).
move the function call to _osmo_fsm_inst_term_children() below the
call to fi->fsm->cleanup().
Change-Id: Ie89d435417306c6bf897274eabc3ed0a46485c26
|
|
At the moment it is not possible to unlink a child from from
its parent, nor is it possible to assign a new parent to a
child FSM.
- osmo_fsm_inst_unlink_parent():
Make it possible to unlink childs from a parent.
- osmo_fsm_inst_change_parent():
Make it possible to change the parent of a child.
Change-Id: I6d18cbd4ada903cf3720b3ad2a89fc643085beef
|
|
llist_del(&fi->proc.child) is executed always, regardless whether
a parent is configured or not. This may lead into a double llist_del
when the child has been previously unlinked.
- check if fi->proc.parent is set, and only then execute
llist_del(&fi->proc.child);
Change-Id: I4b33d508c8a11b72fbf30125088a882894d9e6ac
|
|
When calling the timer_cb, that may have effected an fi termination and
deallocation, e.g. from dispatching events and/or complex choices made.
Current timer_cb implementations expect T to reflect the fired timer number, so
we can't actually set T=0 before calling the timer_cb.
Instead, never reset T to zero, let it always reflect the timer that last
fired. When a new timer starts, T will be set to its new value.
Adding a T arg to the timer_cb() would have been the cleanest solution, so that
fi->T can be set to zero before dispatching the timer_cb. But since we've
already rolled out this FSM API, we should stay backwards compatible.
In the case where the timer returned 1 to request termination, we can assume
that the fi still exists, but to be consistent, don't set T = 0 in that code
path either.
Change-Id: I18626b55a1491098b3ed602df1b331f08d25625a
|
|
Let's fix some erroneous/accidential references to wrong license,
update copyright information where applicable and introduce a
SPDX-License-Identifier to all files.
Change-Id: I39af26c6aaaf5c926966391f6565fc5936be21af
|
|
Let's enforce that the names of FSMs and their instances are valid
osmocom identifiers. This is important as the FSMs are automatically
exported via those names on the CTRL inteface, and we have to make sure
CTRL syntax actually permits them.
Change-Id: I9ef59432f43a3cdb94e4cbb0c44ac3f9b2aac0f2
|
|
Considering the various styles and implications found in the sources, edit
scores of files to follow the same API doc guidelines around the doxygen
grouping and the \file tag.
Many files now show a short description in the generated API doc that was so
far only available as C comment.
The guidelines and reasoning behind it is documented at
https://osmocom.org/projects/cellular-infrastructure/wiki/Guidelines_for_API_documentation
In some instances, remove file comments and add to the corresponding group
instead, to be shared among several files (e.g. bitvec).
Change-Id: Ifa70e77e90462b5eb2b0457c70fd25275910c72b
|
|
Especially for short descriptions, it is annoying to have to type \brief for
every single API doc.
Drop all \brief and enable the AUTOBRIEF feature of doxygen, which always takes
the first sentence of an API doc as the brief description.
Change-Id: I11a8a821b065a128108641a2a63fb5a2b1916e87
|
|
Change-Id: I4c441b20b250c34656f1e8330d6bb4b1ce2b8423
|
|
It's a pity that even with this patch we still are fare away from having
the whole API documented. However, at least we have a more solid
foundation. Updates not only extend the documentation, but also make
sure it is rendered properly in the doxygen HTML.
Change-Id: I1344bd1a6869fb00de7c1899a8db93bba9bafce3
|
|
Add a new function timer function to set up the timer, similar to what
we have in the Linux kernel. This patch also converts existing opencoded
timer setup in the libosmocore tree as initial client of this new
function.
This patch implicitly removes function callback passed by reference that
defeat compile time type validation.
Compile-tested only, but I ran make check that reports success when
testing timer infrastructure.
Change-Id: I2fa49972ecaab3748b25168b26d92034e9145666
|
|
If the user starts the FSM timer with a given timer number during
fsm_inst_state_chg() with a timeout, we should remove that "T" number
after timer expiration. Otherwise it might be confusing if e.g. the VTY
interface shows FSM instances with a certain timer number assigned, but
that timer is not actually running anymore.
Change-Id: I71167ec1000dc4c6954d851d3b92f6bf12984925
|
|
Introduce two lookup helper functions to resolve a fsm_instance based on
the FSM and name or ID. Also, add related test cases.
Change-Id: I707f3ed2795c28a924e64adc612d378c21baa815
|
