DCT3-GSMTAP =========== DCT3-GSMTAP is a command line utility to capture the GSM Um and SIM-ME interfaces from a Nokia DCT3 phone (eg. 3310) and forward via GSMTAP to the Wireshark protocol analyzer. It is released under GNU GPL version 2. It is heavily based on Gammu and Project Blacksphere: This site is the result of a great deal of assembly code reading, research, countless (mostly futile) searches for data sheets, cross-referencing and analysing. If you use this information in any way please mention wumpus (and others in the credits section) in the credits of your program/document. And tell me :) If you have more information please contribute. If you just copy this, stick your name on it and call it yours I hope you get your genitals bitten off by a three headed monkey. Have a nice day. A serial/USB FBUS cable is required. Usage ===== dct3-gsmtap device host The device should be something like /dev/ttyUSB0 (check dmesg once plugged in for exact name) or /dev/ttyS0. The host is where to send the GSMTAP packets to (224.0.0.1 is a good option).