diff options
Diffstat (limited to 'thirdparty/prime/phy/atpl230/apps/phy_tx_test_console/sam4cms16c_sam4cms_db/gcc/asf.h')
-rw-r--r-- | thirdparty/prime/phy/atpl230/apps/phy_tx_test_console/sam4cms16c_sam4cms_db/gcc/asf.h | 147 |
1 files changed, 147 insertions, 0 deletions
diff --git a/thirdparty/prime/phy/atpl230/apps/phy_tx_test_console/sam4cms16c_sam4cms_db/gcc/asf.h b/thirdparty/prime/phy/atpl230/apps/phy_tx_test_console/sam4cms16c_sam4cms_db/gcc/asf.h new file mode 100644 index 00000000..23adc707 --- /dev/null +++ b/thirdparty/prime/phy/atpl230/apps/phy_tx_test_console/sam4cms16c_sam4cms_db/gcc/asf.h @@ -0,0 +1,147 @@ +/** + * \file + * + * \brief Autogenerated API include file for the Atmel Software Framework (ASF) + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * \page License + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef ASF_H +#define ASF_H + +/* + * This file includes all API header files for the selected drivers from ASF. + * Note: There might be duplicate includes required by more than one driver. + * + * The file is automatically generated and will be re-written when + * running the ASF driver selector tool. Any changes will be discarded. + */ +
+// From module: Common SAM compiler driver
+#include <compiler.h>
+#include <status_codes.h>
+
+// From module: EEFC - Enhanced Embedded Flash Controller
+#include <efc.h>
+
+// From module: Flash - SAM Flash Service API
+#include <flash_efc.h>
+
+// From module: FreeRTOS mini Real-Time Kernel
+#include <FreeRTOS.h>
+#include <FreeRTOS_CLI.h>
+#include <StackMacros.h>
+#include <croutine.h>
+#include <list.h>
+#include <mpu_wrappers.h>
+#include <portable.h>
+#include <projdefs.h>
+#include <queue.h>
+#include <semphr.h>
+#include <task.h>
+#include <timers.h>
+
+// From module: GPBR - General Purpose Backup Register
+#include <gpbr.h>
+
+// From module: Generic board support
+#include <board.h>
+
+// From module: IOPORT - General purpose I/O service
+#include <ioport.h>
+
+// From module: Interrupt management - SAM implementation
+#include <interrupt.h>
+
+// From module: PDC - Peripheral DMA Controller Example
+#include <pdc.h>
+
+// From module: PIO - Parallel Input/Output Controller
+#include <pio.h>
+
+// From module: PLC Physical Layer Interface
+#include <atpl230.h>
+#include <atpl230_reg.h>
+
+// From module: PMC - Power Management Controller
+#include <pmc.h>
+#include <sleep.h>
+
+// From module: Part identification macros
+#include <parts.h>
+
+// From module: Proxy Power Line Communication (PLC) Controller Interface - ATPL230 implementation
+#include <pplc_if.h>
+
+// From module: RSTC - Reset Controller
+#include <rstc.h>
+
+// From module: SAM4CMS Demo Board LED support enabled
+#include <led.h>
+
+// From module: SPI - Serial Peripheral Interface
+#include <spi.h>
+
+// From module: Standard serial I/O (stdio) - SAM implementation
+#include <stdio_serial.h>
+
+// From module: System Clock Control - SAM4CM implementation
+#include <sysclk.h>
+
+// From module: TC - Timer Counter
+#include <tc.h>
+
+// From module: TRNG - True Random Number Generator Register
+#include <trng.h>
+
+// From module: UART - Univ. Async Rec/Trans
+#include <uart.h>
+
+// From module: USART - Serial interface - SAM implementation for devices with both UART and USART
+#include <serial.h>
+
+// From module: USART - Univ. Syn Async Rec/Trans
+#include <usart.h>
+
+// From module: WDT - Watchdog Timer
+#include <wdt.h>
+
+// From module: pio_handler support enabled
+#include <pio_handler.h>
+ +#endif // ASF_H |