1 files changed, 97 insertions, 0 deletions
diff --git a/thirdparty/prime/phy/atpl230/apps/phy_tester_tool/sam4sd32c_atpl230amb/conf_board.h b/thirdparty/prime/phy/atpl230/apps/phy_tester_tool/sam4sd32c_atpl230amb/conf_board.h
new file mode 100644
index 00000000..26af3ed8
--- /dev/null
+++ b/thirdparty/prime/phy/atpl230/apps/phy_tester_tool/sam4sd32c_atpl230amb/conf_board.h
@@ -0,0 +1,97 @@
+/**
+ * \file
+ *
+ * \brief Board configuration.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef CONF_BOARD_H_INCLUDED
+#define CONF_BOARD_H_INCLUDED
+
+/* BOARD Rev. */
+#define BOARD_REV BOARD_REV_2
+
+/** Enable watchdog */
+//#define CONF_BOARD_KEEP_WATCHDOG_AT_INIT
+
+/** Configure Slow Clock as External Crystal */
+#define CONF_BOARD_32K_XTAL
+
+/** Enable UART 0 */
+#define CONF_BOARD_UART0
+
+/** Enable UART 1 */
+//#define CONF_BOARD_UART1
+
+/** Enable Com Port. */
+#define CONF_BOARD_UART_CONSOLE
+
+/** Enable USART 0 */
+//#define CONF_BOARD_USART0_RXD
+//#define CONF_BOARD_USART0_TXD
+//#define CONF_BOARD_USART0_CTS
+//#define CONF_BOARD_USART0_RTS
+
+/** Enable USART 1 */
+//#define CONF_BOARD_USART1_RXD
+//#define CONF_BOARD_USART1_TXD
+//#define CONF_BOARD_USART1_CTS
+//#define CONF_BOARD_USART1_RTS
+
+/** Enable PLC SPI_0 */
+#define CONF_BOARD_SPI0
+
+/** Enable PLC SPI_1 */
+//#define CONF_BOARD_SPI1
+
+/** Enable PLC TWI_0 */
+//#define CONF_BOARD_TWI0
+
+/* Configure PPLC reset pins */
+#define CONF_BOARD_PPLC_ARST
+#define CONF_BOARD_PPLC_SRST
+
+/** Enable LCD */
+//#define CONF_BOARD_LCD_EN
+
+/** Enable Xplain PRO SLP pin */
+//#define CONF_BOARD_XP_SLP
+
+#endif /* CONF_BOARD_H */
+