aboutsummaryrefslogtreecommitdiffstats
path: root/thirdparty/prime/apps/prime_base_serial/sam4cmp16c_sam4cmp_db/gcc/config.mk
diff options
context:
space:
mode:
Diffstat (limited to 'thirdparty/prime/apps/prime_base_serial/sam4cmp16c_sam4cmp_db/gcc/config.mk')
-rw-r--r--thirdparty/prime/apps/prime_base_serial/sam4cmp16c_sam4cmp_db/gcc/config.mk222
1 files changed, 222 insertions, 0 deletions
diff --git a/thirdparty/prime/apps/prime_base_serial/sam4cmp16c_sam4cmp_db/gcc/config.mk b/thirdparty/prime/apps/prime_base_serial/sam4cmp16c_sam4cmp_db/gcc/config.mk
new file mode 100644
index 00000000..bf1f0f06
--- /dev/null
+++ b/thirdparty/prime/apps/prime_base_serial/sam4cmp16c_sam4cmp_db/gcc/config.mk
@@ -0,0 +1,222 @@
+#
+# Copyright (c) 2011 Atmel Corporation. All rights reserved.
+#
+# \asf_license_start
+#
+# \page License
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# 1. Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+#
+# 2. Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# 3. The name of Atmel may not be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# 4. This software may only be redistributed and used in connection with an
+# Atmel microcontroller product.
+#
+# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+# \asf_license_stop
+#
+
+# Path to top level ASF directory relative to this project directory.
+PRJ_PATH = ../../../../../..
+
+# Target CPU architecture: cortex-m3, cortex-m4
+ARCH = cortex-m4
+
+# Target part: none, sam3n4 or sam4l4aa
+PART = sam4cmp16c:0
+
+# Application target name. Given with suffix .a for library and .elf for a
+# standalone application.
+TARGET_FLASH = apps_prime_base_serial_flash.elf
+TARGET_SRAM = apps_prime_base_serial_sram.elf
+
+# List of C source files.
+CSRCS = \
+ common/services/clock/sam4cm/sysclk.c \
+ common/services/serial/usart_serial.c \
+ common/utils/interrupt/interrupt_sam_nvic.c \
+ common/utils/stdio/read.c \
+ common/utils/stdio/write.c \
+ sam/boards/sam4cmp_db/init.c \
+ sam/drivers/efc/efc.c \
+ sam/drivers/gpbr/gpbr.c \
+ sam/drivers/pdc/pdc.c \
+ sam/drivers/pio/pio.c \
+ sam/drivers/pio/pio_handler.c \
+ sam/drivers/pmc/pmc.c \
+ sam/drivers/pmc/sleep.c \
+ sam/drivers/spi/spi.c \
+ sam/drivers/tc/tc.c \
+ sam/drivers/uart/uart.c \
+ sam/drivers/usart/usart.c \
+ sam/drivers/wdt/wdt.c \
+ sam/services/flash_efc/flash_efc.c \
+ sam/services/plc/buart_if/buart_if.c \
+ sam/services/plc/busart_if/busart_if.c \
+ sam/services/plc/hal/prime/hal.c \
+ sam/services/plc/pcrc/pcrc.c \
+ sam/services/plc/pplc_if/atpl230/pplc_if.c \
+ sam/services/plc/usi/usi.c \
+ sam/utils/cmsis/sam4cm/source/templates/gcc/startup_sam4cm.c \
+ sam/utils/cmsis/sam4cm/source/templates/system_sam4cm.c \
+ sam/utils/syscalls/gcc/syscalls.c \
+ thirdparty/freertos/freertos-7.3.0/source/FreeRTOS_CLI.c \
+ thirdparty/freertos/freertos-7.3.0/source/list.c \
+ thirdparty/freertos/freertos-7.3.0/source/portable/gcc/sam/port.c \
+ thirdparty/freertos/freertos-7.3.0/source/portable/memmang/heap_4.c \
+ thirdparty/freertos/freertos-7.3.0/source/queue.c \
+ thirdparty/freertos/freertos-7.3.0/source/tasks.c \
+ thirdparty/freertos/freertos-7.3.0/source/timers.c \
+ thirdparty/prime/apps/prime_base_serial/main.c \
+ thirdparty/prime/mac/mac_1_3/addons/serial_if/serial_if_mlme.c \
+ thirdparty/prime/mac/mac_1_3/addons/serial_if/serial_if_plme.c \
+ thirdparty/prime/mac/mac_1_3/addons/serial_if/serial_if_sniffer.c \
+ thirdparty/prime/mac/mac_1_3/module_config/conf_mac.c \
+ thirdparty/prime/mac/mac_1_3/source/PrimeVersion.c \
+ thirdparty/prime/oss/oss_if.c \
+ thirdparty/prime/pal/atpl230_primemac13/source/pal.c \
+ thirdparty/prime/phy/atpl230/coupling_config/conf_atpl230.c \
+ thirdparty/prime/phy/atpl230/source/atpl230.c \
+ thirdparty/prime/phy/atpl230/source/atpl230_iir_filter.c \
+ thirdparty/prime/sscs/sscs-4-32/addons/serial_if/serial_432_if.c
+
+# List of assembler source files.
+ASSRCS =
+
+# List of include paths.
+INC_PATH = \
+ common/boards \
+ common/services/clock \
+ common/services/ioport \
+ common/services/serial \
+ common/services/serial/sam_uart \
+ common/utils \
+ common/utils/stdio/stdio_serial \
+ sam/boards \
+ sam/boards/sam4cmp_db \
+ sam/drivers/efc \
+ sam/drivers/gpbr \
+ sam/drivers/pdc \
+ sam/drivers/pdc/pdc_uart_example \
+ sam/drivers/pio \
+ sam/drivers/pmc \
+ sam/drivers/spi \
+ sam/drivers/tc \
+ sam/drivers/uart \
+ sam/drivers/usart \
+ sam/drivers/wdt \
+ sam/services/flash_efc \
+ sam/services/plc/buart_if \
+ sam/services/plc/busart_if \
+ sam/services/plc/hal/prime \
+ sam/services/plc/pcrc \
+ sam/services/plc/pplc_if/atpl230 \
+ sam/services/plc/usi \
+ sam/utils \
+ sam/utils/cmsis/sam4cm/include \
+ sam/utils/cmsis/sam4cm/source/templates \
+ sam/utils/header_files \
+ sam/utils/preprocessor \
+ thirdparty/CMSIS/Include \
+ thirdparty/CMSIS/Lib/GCC \
+ thirdparty/freertos/freertos-7.3.0/source/include \
+ thirdparty/freertos/freertos-7.3.0/source/portable/gcc/sam \
+ thirdparty/prime/apps/prime_base_serial \
+ thirdparty/prime/apps/prime_base_serial/sam4cmp16c_sam4cmp_db \
+ thirdparty/prime/mac/mac_1_3/addons/bootloader \
+ thirdparty/prime/mac/mac_1_3/addons/serial_if \
+ thirdparty/prime/mac/mac_1_3/include \
+ thirdparty/prime/mac/mac_1_3/module_config \
+ thirdparty/prime/oss \
+ thirdparty/prime/pal/atpl230_primemac13/include \
+ thirdparty/prime/pal/atpl230_primemac13/module_config \
+ thirdparty/prime/phy/atpl230/coupling_config \
+ thirdparty/prime/phy/atpl230/include \
+ thirdparty/prime/sscs/sscs-4-32/addons/serial_if \
+ thirdparty/prime/sscs/sscs-4-32/include \
+ thirdparty/prime/apps/prime_base_serial/sam4cmp16c_sam4cmp_db/gcc
+
+# Additional search paths for libraries.
+LIB_PATH = \
+ thirdparty/CMSIS/Lib/GCC \
+ thirdparty/prime/mac/mac_1_3/libs/gcc \
+ thirdparty/prime/sscs/sscs-4-32/libs/gcc
+
+# List of libraries to use during linking.
+LIBS = \
+ arm_cortexM4l_math \
+ sam4c-mac13-bn-gcc \
+ sam4c-sscs432-bn-gcc \
+ m
+
+# Path relative to top level directory pointing to a linker script.
+LINKER_SCRIPT_FLASH = sam/utils/linker_scripts/sam4cm/gcc/sam4cmp16c_0_flash.ld
+LINKER_SCRIPT_SRAM = sam/utils/linker_scripts/sam4cm/gcc/sam4cmp16c_0_sram.ld
+
+# Path relative to top level directory pointing to a linker script.
+DEBUG_SCRIPT_FLASH = sam/boards/sam4cmp_db/debug_scripts/gcc/sam4cmp_db_flash_0.gdb
+DEBUG_SCRIPT_SRAM = sam/boards/sam4cmp_db/debug_scripts/gcc/sam4cmp_db_sram_0.gdb
+
+# Project type parameter: all, sram or flash
+PROJECT_TYPE = flash
+
+# Additional options for debugging. By default the common Makefile.in will
+# add -g3.
+DBGFLAGS =
+
+# Application optimization used during compilation and linking:
+# -O0, -O1, -O2, -O3 or -Os
+OPTIMIZATION = -O1
+
+# Extra flags to use when archiving.
+ARFLAGS =
+
+# Extra flags to use when assembling.
+ASFLAGS =
+
+# Extra flags to use when compiling.
+CFLAGS =
+
+# Extra flags to use when preprocessing.
+#
+# Preprocessor symbol definitions
+# To add a definition use the format "-D name[=definition]".
+# To cancel a definition use the format "-U name".
+#
+# The most relevant symbols to define for the preprocessor are:
+# BOARD Target board in use, see boards/board.h for a list.
+# EXT_BOARD Optional extension board in use, see boards/board.h for a list.
+CPPFLAGS = \
+ -D ARM_MATH_CM4=true \
+ -D BOARD=SAM4CMP_DB \
+ -D __FREERTOS__ \
+ -D __SAM4CMP16C_0__ \
+ -D printf=iprintf \
+ -D scanf=iscanf
+
+# Extra flags to use when linking
+LDFLAGS = \
+
+# Pre- and post-build commands
+PREBUILD_CMD =
+POSTBUILD_CMD = \ No newline at end of file